Ballard Designs Tumlin SR075 User manual

REQUIRED TOOLS:
Phillips Screwdriver, Allen Wrench (included)
-Two person assembly suggested.
Ltr. Qty. Hardware Included
Wall Anchoring
(Anti-tip) Kits
See page 2
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
ANCHORING HARDWARE INCLUDED
Allen Wrench
(Retain for Door Adjustments)
DOOR ADJUSTMENT:
To adjust door swing resistance (+/-)
place Cabinet backside down and
turn adjustment screw clock-
wise/counterclockwise using Allen
Wrench (A).
LEVELERS: Cabinet is equipped with Rotary
Levelers installed under each Leg. If neces-
sary, adjustments may be made by carefully
lifting applicable corner and turning Levelers
clockwise/counterclockwise.
B 2
A 1
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-14-2022 Page 1 of 2
PRODUCT NAME: Tumlin Revolving Bar Cabinet
ITEM NUMBER: SR075
ASSEMBLED DIMENSIONS : 38”H x 37.5”W x 17”D
MADE IN INDIA
(A)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.

(A)
(D)
(B)
(C)
W
A
LLS
T
U
D
WALL BRACKET MUST BE ATTACHED TO WALL STUD
WALL ANCHORING HARDWARE (ANTI-TIP)
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
Ltr.
A4 Small Screw
Retention Belt
Qty. Hardware Included
B4 Large Screw
C4 Bracket
D2
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screws (A).
3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD
with Large Screws (B) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
Representative Image
Not meant to be actual item included with
these instructions.
Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com