Ballard Designs CASA Florentina Josephina MS134 User manual

PRODUCT NAME: MS134
ITEM NUMBER: CF Josephina Media Console
ASSEMBLED DIMENSIONS: 31”H x 62”W x 13”D
PRODUCT NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1-19-2022
MADE IN ITALY
Page 1 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.

Page 2 of 5
Ltr.
A 8
B 4
Qty. Hardware Included
Ltr.
G
H
2
2
Qty. Components
C 16
Shelf Supports
Leveler Tool
Connector Brackets
(For joining 2 or more units)
Screws
D
E
Anti-Tip
Anchoring Kit
4
1
I1
Shelves (H)
Console (I)
Base Molding (G)
F2
Bolts
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Periodically dust with a soft, dry cloth.
Protect surfaces to prevent damage.
Do not use alcohol based cleaners or polishers.
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
ANCHORING HARDWARE INCLUDED
REQUIRED TOOLS:
Phillips Screwdriver
Leveler Tool (included)
- Two person assembly suggested.
Remove all parts, hardware and
protective packaging and carefully
arrange on a clean, level surface.
Assemble in location for intended use.

Page 3 of 5
STEP 1: Console (I) is equipped with removable Base Moulding (G). On a soft, padded surface gently
lay Console backside down. Orient base molding with square edge to back and insert Bolts (D) through
pre-drilled holes and into T-nut in Base Molding. Use a screwdriver to firmly tighten.
Install Bolts through
cabinet from inside base
(D)
STEP 2: Console (I) is equipped with Levelers under each corner which are accessible from the
bottom INSIDE of Console. If necessary, insert Leveler Tool (E) into opening in corner(s) and turn
clockwise/counterclockwise to adjust.
Leveler accessible from inside
Console.
(I)
(E)
NOTE: If attaching Bookcase(s) or Cabinet(s) SKIP THIS STEP.
Assemble in location for intended use.
NOTE: When attaching muliple units together, level each before joining with brackets.
(G)
(I)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 4 of 5
STEP 3: Determine placement for Shelves (H) then insert Shelf Supports (A) into corresponding
pre-drilled holes inside Console (I). Tilt in and gently lay Shelf upon Supports.
(A)
(H)
STEP 4: (OPTIONAL) Muliple Casa Florentina Josephina components (each sold separately) may be
joined together into a single unit. First, remove Base Molding (Steps 1 and 2) on sides of units that
abut one another. Push units together and use Connector Brackets (B) to join at seams on back side.
Use a screwdriver to firmly tighten Screws (C).
NOTE: Align cross imprinted into Connector Bracket directly over seam between units. This will
ensure screws are secured into wood side panels and NOT backer board.
(C)
BACK VIEW
Console
Assemble in location for intended use.
WARNING: To prevent a dangerous tip-over accident, units must be
secured together using Connector Plates BEFORE anchoring to wall.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Installation:
Ltr.
A2
Small Screw
Retention Belt
Qty. Hardware Included
B2
Large Screw
C4 Bracket
D2
WALL ANCHORING HARDWARE (ANTI-TIP)
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screw (B).
3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD
with Large Screw (A) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
W
A
L
L
S
TUD
WALL BRACKET MUST BE ATTACHED TO WALL STUD
(A)
(B)
(C)
(D)
Representative Image
Not meant to be actual item included with
these instructions.