Bay-Tek Piano Keys User manual

2
FACTORY CONTACT INFORMATION
All games are proudly manufactured at our factory in Pulaski, Wisconsin, USA
BAY TEK ENTERTAINMENT
Pulaski Industrial Park
1077 East Glenbrook Drive
Pulaski, WI 54162 USA
JOIN OUR SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest game
information, early notification of parts specials, pertinent technical bulletins,
updates on retro fit parts, software upgrades, and much more.
Log on to : http://www.baytekent.com
Then click on the Register tab.
SALES
Phone: [phone]
Fax: [phone]
Email: [email protected]
PARTS
Phone: [phone] Ext 1101
Fax: [phone]
Email: [email protected]
SERVICE
Phone: [phone] Ext 1102
Fax: [phone]
Email: [email protected]
Open Monday - Friday
8 AM - 5PM C.S.T.

3
Manual Revision 3/15/2019 Software Version PK1.0.0
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION ………………………………. 2
WELCOME TO PIANO KEYS …………………………………………. 4
HOW TO PLAY ………………………………………………………….. 5
GAME SPECIFICATIONS ……………………………………………… 6
SAFETY PRECAUTIONS ……………………………………………… 6
GAME SET UP ………………………………………………………. 7 - 10
ADJUSTABLE MARQUEE …………………………………………….. 11
CARD SWIPE INSTALLATION ……………………………………….. 12
MAIN MENU FUNCTIONS ……………………………………………. 13
VOLUME & ATTRACT ………………………………………….. 14
GAME SETTINGS ……………………………………………………… 14
PAYOUT SETTINGS …………………………………………………. 15
SONGBOOK SETTINGS ………………………………………. 16
STATISTICS ……………………………………………………… 17
DIAGNOSTICS ………………………………………………….. 17
DIPSWITCH SETTINGS ………………………………………………. 18
CIRCUIT BOARD LAYOUT …………………………………………… 19
WIRING DIAGRAMS ……………………………………………… 20 - 24
DIAGNOSTICS ……………………………………………………. 25 - 29
POWER SUPPLY DIAGNOSTICS …………………………………… 30
BILL ACCEPTOR DIAGNOSTICS …………………………………… 31
HOW TO ACCESS KEY SENSORS …………………………………. 32
HOW TO CHANGE MONITOR …………………………………...33 - 34
DOOR BOARD PINOUT ………………………………………………. 35
AVAILABLE BLANKING PLATES …………………………………….. 35
MONITOR SETTINGS …………………………………………………. 36
PARTS LIST …………………………………………………………….. 37
DECAL DIAGRAM ……………………………………………………… 38
PARTS PICTURES …………………………………………………….. 39
MAINTENANCE LOG ………………………………………………….. 40
TECHNICAL SUPPORT ……………………………………………….. 41
WARRANTY …………………………………………………………….. 42
S

4
WELCOME TO PIANO KEYS
Congratulations on your PIANO KEYS purchase!
Piano Keys’ beautifully lit, attention-grabbing cabinet and marquee along with the fun
and simple game play will have aspiring musicians flocking back time and time again
to beat their high scores!
The competitive nature and player paced play of Piano Keys appeals to all ages.
Simply hit the oversized novelty key that matches the colored square on the screen to
play a variety of well-known tunes, accumulating tickets as you go! The faster and
more accurately you play, the more tickets you win!
Please take a moment to read through this manual as it contains a lot of helpful
information. Be sure to contact our factory if you have any questions, or would like
more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy
this game as much as we do!
GAME INSPECTION
Please inspect the game for any damaged, loose, or missing parts.
If damage is found, please contact your freight carrier first.
Then, contact Bay Tek Entertainments’ Service Department at
[phone] Ext. 1102
Or email them at [email protected] for further assistance.

5
HOW TO PLAY
Swipe card, or insert credits to start game.
Follow the colored squares on the screen to
play on the oversized keys.
The faster and more accurately you play,
the more tickets you win!
Play again to beat your high score.

6
SAFETY PRECAUTIONS
GAME SPECIFICATIONS
WEIGHT
NET WEIGHT 550 lbs. 249 kg
SHIP WEIGHT 600 lbs. 272 kg
GAME DIMENSIONS
WIDTH 34" 87 cm
DEPTH 54" 138 cm
HEIGHT
(Adjustable to 84 3/4”) 107" 272 cm
OPERATING TEMPERATURE
FAHRENHEIT 45 - 80 F
CELSIUS 7.2 - 26.7 C
SHIPPING DIMENSIONS
WIDTH 40"
DEPTH 60"
HEIGHT 90"
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE
100 to 120
VAC
220 to 240
VAC
INPUT FREQUENCY
RANGE 50 Hz
60 Hz
MAX OPERATING CURRENT
2.8 AMPS @ 120 VAC / 1.8 AMPS @ 220VAC

7
The game will arrive on one pallet. Please inspect the pallet for shipping
damage and report immediately to the freight company if any damage is
found.
Unbox the pallet and remove the box from the top of the player console. This
is the marquee.
Please unbox the marquee and proceed to assembly instructions.
Remove the keys from the small plastic bag taped to the top console.
PIANO KEYS GAME SETUP
Open the front door using a H95 key.
Tools Needed:
1 step ladder (6-8 foot) # 2 Phillips screwdriver bit
2 people Diagonal Cutting Pliers (Snips)
Important:
The marquee of game is small, but bulky and heavy. We recommend
one person on the ladder, and a second person to lift the marquee up to
the top of the game.
Remove the hardware kit from the coin box.
Close and lock coin box door, remove key to allow the
front door to close fully.
Open the coin box door using a E00 key.

8
Note: The bolts to attach marquee will thread from under
the top of game cabinet - up into the marquee.
GAME SETUP
Remove the 2 white plastic tie wraps by carefully cutting
each with a diagonal cutting pliers (snips).
Be careful not to cut the cables.
Raise the marquee to the top of the game.
From the back of the cabinet, feed the cable harness down
the left side hole into the game cabinet.
Marquee Preparation Work:
Locate the 2 of part # A5BOPH301 Philips head
bolt. (1/4-20 X 5/8" with star washer)
Attach the flat artwork to the rear of the marquee
using a #2 Phillips head screwdriver.
Unlock and remove upper rear door using a H95 key.
Set the door aside for later installation.

9
GAME SETUP
Connect the marquee cable harness to the
game harness by plugging in the 6
connectors as shown.
Position the marquee on the top of the game as shown:
Clip the cable harness
into the plastic wire
saddle along the left
side of the back of
game cabinet.
Locate the hardware needed to install marquee to top of game:
2 each of:
A5BOPH320 A5WAFL060 A5WASI020
1/4 - 20 by 1 1/2” 1/4” Flat Washer 1/4” Split Washer
Place a split washer on the bolt,
then a flat washer as shown:
Install the assembled bolt upward from the game cabinet up into
the marquee using a #2 Phillips head screwdriver.
Tighten both bolts to secure the marquee.

10
The game is now set up and ready for play!
Enter menu to adjust settings to your location specific price per play
and ticket payout.
Power on game:
Open the front door and turn on the rocker switch on the power strip.
GAME SETUP
Peel away the protective film from the front of monitor cover.
Plug in game:
There are 2 options:
Option #1: Power Cord from Back of Cabinet
Unclip the power cord from back of game, carefully
extend power cord and plug into the wall.
Option #2: Power Cord from Bottom of Cabinet
Unlock and remove lower rear door using a H95 key
Unclip power cord from back of game and push plug
back inside the cabinet.
Bring power cord out through the hole in the bottom of
game as shown and plug into the floor.

11
ADJUSTABLE MARQUEE
Components of the marquee can be removed to accommodate a lower ceiling height.
Refer to chart below for available options:
8’ 11”
107”
272 cm
8’ 3”
99”
252 cm
7’ 11”
95”
242 cm
7” 3/4”
84 3/4”
213 cm

12
Please contact Baytek Games if any further questions. [phone] Ext. 1102
CARD SWIPE SYSTEM INSTALLATION
The Piano Keys game is pre-wired with a UCL (Universal Card Link) connector to accept Card Swipe
systems from many different manufactures.
Please follow these instructions to make full use of this capability.
Notes:
- Many card swipe systems have a voltage threshold that can be adjusted in the card swipe
menu. Please set this “Game Drive Threshold” to 2 Volts.
Menu Changes
Enter menu, go to “Payout” Menu
Verify “Credits Per Play” set to 1
Verify “Swipe Prompt” set to “Enabled”
Go to “Game” Menu
Set “Redemption Type” to desired option
Check dipswitches on the I/O Aux Board in the front of game. Verify Dipswitch # 5 ON
Option #1:
Card swipe systems may come with a standard 9 pin Molex
connector. This is the UCL connector.
Simply plug this connector into your
card swipe reader.
Option #2:
If your card swipe systems does not have a standard 9 pin
Molex connector, then you will have to splice wires into the
AACE13014 harness.
Black wire is ground. (common)
Green wire is coin signal.
Yellow wire is +12 Volts DC
AACE13014
AACE13014
AACE13014
12 Volt DC Power from
Power Dist. Board
This would normally plug
into coin mechanism.
AACE13014
AACE13014
AACE13014
12 Volt DC Power from
Power Dist. Board

13
MAIN MENU FUNCTIONS
The Menu and Menu Select buttons are located
inside the front door.
Hold the MENU button down for 1 second to open
the main menu on the monitor.
Press MENU to scroll through the options, and
MENU SELECT to change the settings.
MAIN MENU
CLEAR TICKETS &
CREDITS
PRESS MENU SELECT BUTTON 3 TIMES
TO CLEAR
VOLUME & ATTRACT PRESS MENU SELECT TO ENTER
VOLUME SETTINGS
GAME SETTINGS PRESS MENU SELECT TO ENTER
GAME SETTINGS
PAYOUT SETTINGS PRESS MENU SELECT TO ENTER
PAYOUT SETTINGS
SONGBOOK
SETTINGS
PRESS MENU SELECT TO ENTER
SONGBOOK SETTINGS
STATISTICS PRESS MENU SELECT TO ENTER
STATISTICS
DIAGNOSTICS PRESS MENU SELECT TO ENTER
DIAGNOSTIC
RESET FACTORY
DEFAULTS
PRESS MENU SELECT BUTTON 5 TIMES
TO RESET TO FACTORY DEFAULTS
MUTE ON
( No sound from game) OFF
EXIT PRESS MENU SELECT BUTTON TO
EXIT MENU
*** Default settings are highlighted in yellow
Software versions are shown on the bottom of the main menu screen.
If one shows “Not Found” then the circuit board is not communicating
to motherboard.

14
VOLUME & ATTRACT SETTINGS
GAME SETTINGS
ATTRACT VOLUME 0
(No attract volume) TO 10 DEFAULT: 4
GAME VOLUME 0
(No game volume) TO 10 DEFAULT: 6
ATTRACT TIMING
DISABLED
(Never play
attract music)
1
Minute TO 30 Minutes
DEFAULT:
3 Minutes
BACK PRESS MENU SELECT TO RETURN TO MAIN
MENU
GAME TIME 10 Seconds TO
In increments
of 1 second
60
Seconds
DEFAULT:
20
Seconds
BAD NOTE
PENALTY
Timed delay if
wrong key is
pressed
0.0 Seconds
No Penalty
0.1
Seconds
TO
In increments
of 0.1 second
2
Seconds
DEFAULT:
0.6
Seconds
GAME
TIMEOUT
Amount of time
before game timer
starts
DISABLED
Game will wait
forever until
first key is
pressed
1
Second
TO
In Increments
of 1 second
30
Seconds
DEFAULT:
DISABLED
REDEMPTION
TYPE TICKETS COUPONS POINTS DEFAULT:
TICKETS
BACK PRESS MENU SELECT TO RETURN TO MAIN MENU

15
PAYOUT SETTINGS
TICKET PATTERNS
PATTERN TICKETS PER KEYS HIT AVERAGE TICKETS
(AT 20 SECOND GAME TIME)
1 1 10 4
2 1 5 8
3 1 3 13
4 2 5 16
5 1 2 20
6 4 7 23
7 5 8 25
8 4 6 27
9 3 4 30
10 7 8 35
11 5 4 50
12 7 4 70
CREDITS PER
PLAY FREE PLAY 1 TO
In increments
of 1
20 DEFAULT:
1
SWIPE PROMPT ENABLED
Shows "Swipe Card to Play"
OR DISABLED
Shows "Credits"
DEFAULT:
ENABLED
TICKET PATTERN Refer to Chart Below DEFAULT:
9
FIXED TICKETS
Fixed tickets given per
game. This overrides
"Ticket Pattern"
DISABLED 1 TO
In increments
of 1
30 DEFAULT:
DISABLED
MERCY TICKETS
Tickets given if no tickets
are won
DISABLED 1 TO
In increments
of 1
10 DEFAULT:
DISABLED
BACK PRESS MENU SELECT TO RETURN TO MAIN MENU

16
SONGBOOK SETTINGS
AMAZING GRACE ENABLED DISABLED
AULD LANG ENABLED DISABLED
BABA BLACK SHEEP ENABLED DISABLED
CANCAN ENABLED DISABLED
CHICKEN DANCE ENABLED DISABLED
CHOPSTICKS ENABLED DISABLED
FUR ELISE ENABLED DISABLED
HAPPY BIRTHDAY ENABLED DISABLED
HARK ANGEL ENABLED DISABLED
LONDON BRIDGES ENABLED DISABLED
MARY LITTLE LAMB ENABLED DISABLED
ODE TO JOY ENABLED DISABLED
OLD MCDONALD ENABLED DISABLED
STAR SPANGLED BANNER ENABLED DISABLED
TAKE ME OUT ENABLED DISABLED
TEN GREEN BOTTLES ENABLED DISABLED
THIS OLD MAN ENABLED DISABLED
TWINKLE TWINKLE ENABLED DISABLED
WORKIN ON THE RAILROAD ENABLED DISABLED
BACK
PRESS MENU SELECT
BUTTON TO RETURN TO
MAIN MENU
Songs used in game play can be Enabled or Disabled in this menu.

17
STATISTICS
TOTAL GAMES PLAYED Reports the actual games played since
last reset
TOTAL TICKETS Reports the actual tickets out since
last reset
AVERAGE TICKETS PER GAME Reports the current average tickets per
game since last reset
RESET STATS PRESS MENU SELECT BUTTON
5 TIMES TO RESET STATISTICS
RESET HIGH SCORES PRESS MENU SELECT BUTTON
3 TIMES TO RESET HIGH SCORES
BACK PRESS MENU SELECT TO
RETURN TO MAIN MENU
DIAGNOSTIC
LEFT KEY INPUT UP DOWN
(When key is pressed)
LEFT MIDDLE KEY INPUT UP DOWN
(When key is pressed)
RIGHT MIDDLE KEY INPUT UP DOWN
(When key is pressed)
RIGHT KEY INPUT UP DOWN
(When key is pressed)
DOOR BOARD INPUTS
0
This value will change when low
ticket switch and menu buttons are
pressed.
TICKET DISPENSE
TEST
Press Menu Select Button to
dispense 1 ticket
BACK PRESS MENU SELECT BUTTON
TO RETURN TO MAIN MENU

18
Note:
UP IS ON
DIPSWITCH SETTINGS
SWITCH DESCRIPTION ON OFF
1 SHOW GAME
Does not dispense tickets and clears all accumulated credits X
2 AMUSEMENT ONLY
Does not dispense tickets X
3
NJ LOCKOUT
Saves tickets owed and unused credits after a power loss X
4
1/2 TICKET PAYOUT
Dispenses 1/2 the amount of tickets as shown on screen.
It will round up odd amounts of tickets
X
5
DISABLES LOW TICKET INPUT
Disables the low ticket message on screen.
This option should be enabled when using a card swipe system
X
6 NOT USED
7 NOT USED
8 NOT USED

19
CIRCUIT BOARD LAYOUT
A5CB9600
Audio Amplifier
A5CE2300
Audio Cable
AACE13010
Speakers
AACE13022
12 VDC In
AACB13000
Key Controller
Board
AACE13039
Signal up to
marquee
AACE13017
Power In
from Power
Dist. Board
CE13003
CE13021
CE13002
CE13021
CE13001
CE13021
CE13000
CE13021
A5CBL5900
USB Communication
to Motherboard
AACB5156
Power Dist. Board
Power In from Power Supply
CE13004
CE13005
CE13007
CE13038 CE13008
CE13006
CE13014
AACE13022
12 V Power
to A5CB9600
AACE13017
Power to
8001 Board
AACB9604
I/O Aux Board
AACE13014
Ticket Dispenser
AACE13011
Menu Buttons
& Meters
AACE13014
Coin Mech
AACE13005
Power in from
Power Dist Bd
AACE13014
DBA Cable
AACE13014
Ticket Switch
Red and
Yellow
LEDs
Green
Power
LED
A5CORD13000
USB Communication
to Motherboard

20
I/O AUX BOARD, COIN MECH, MENU & COUNTER
Menu
Select
AAPB2700
Menu
Button
AAPB2700
Game
Counter
Ticket
Counter
AACO1020
AACE13011
AACE13005
Power In
from Power
Distribution
Board
WIRING DIAGRAM
Low Ticket Switch
Wired Normally Open
AASW200
1/4” Spacer A5SENY020
AACE13014
To Ticket
Dispenser
Part # A5TD1
Notch Signal
Com Ground
Enable Signal
12 Volt Power
Coin Switches and Lights
AACBL4A-DOOR
UCL Connector
Card Swipe system cable would be
plugged into this connector.
AACE13014
Power In
from Power
Distribution
Board
AACB9604
I/O Aux Board
12 Volt Bill Acceptor is
Part # A5AC9101 or
A5AC9094
AACE13014
AACE13014
AACE13014
AACE13014
AACE13014
Red and
Yellow
LEDs
Green
Power
LED
A5CORD13000
USB Communication
to Motherboard
Yellow is 12 Volts DC
Green is Coin Up Signal
Black is Ground
Pink is 12 Volts DC
Brown is Coin Up Signal
Yellow is Ground