Bay-Tek Pop the Lock User manual

1
Licensed By:
Simple Machine and its logo and Pop The Lock are
trademarks of Simple Machine and are
used with permission.
© Simple Machine. All Rights Reserved.

2
FACTORY CONTACT INFORMATION
BAY TEK GAMES INC.
Pulaski Industrial Park
1077 East. Glenbrook Drive
Pulaski, WI 54162 USA
PARTS
P: 920.822.3951 X 1101
F: 920.822.1496
E: [e-mail]
MON - FRI
8 AM - 5 PM C.S.T.
SERVICE
P: 920.822.3951 X 1102
F: 920.822.1496
E: [e-mail]
SALES
P: 920.822.3951
F: 920.822.8936
E: [e-mail]
All games are proudly manufactured at our factory in Pulaski, Wisconsin, USA
JOIN OUR SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest game
information, early notication of parts specials, pertinent technical
bulletins, updates on retro t parts, software upgrades, and much more.
Log on to: www.baytekgames.com/parts
then click on the Parts N’ Service tab, or scan the QR code below with
your Smartphone to jump straight to this game’s parts page!
Scan here!

3
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION ..............................2
WELCOME TO: Pop The Lock ....................................4
HOW TO PLAY ................................................5
SPECIFICATIONS..............................................6
SAFETY PRECAUTIONS ........................................6
SETUP GUIDE WITH HASP ................................... 7-11
HEIGHT MODIFICATION OPTIONS...............................12
HOW TO: ACCESS MONITOR ...................................13
DIP SWITCH SETTINGS .......................................14
MAIN MENU FUNCTIONS ......................................15
VOLUME & ATTRACT SETTINGS ................................16
GAME SETTINGS..........................................17-19
PAYOUT SETTINGS ...........................................19
TICKET PATTERNS ...........................................20
STATISTICS .................................................21
CIRCUIT BOARD LAYOUT ......................................22
MAINBOARD PINOUT .........................................23
PINOUT GUIDE...............................................24
TROUBLESHOOTING ......................................25-29
WIRING DIAGRAMS........................................30-34
POWER SUPPLY DIAGNOSTICS ................................35
DBA DIAGNOSTICS ...........................................36
PARTS LIST .................................................37
PARTS PICTURES ............................................38
DECALS DIAGRAM ...........................................39
TECHNICAL SUPPORT ........................................40

4
WELCOME TO: Pop The Lock
Congratulations on your Pop The Lock purchase!
With it’s challenging skill-based game play that leaves players wanting to continue their
play, Pop the Lock will have you unlocking new prots and fun!
Please take a moment to read through this manual and be sure to contact our factory if
you have any questions, or would like some more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy
this game as much as we do!
Your Friends at Bay Tek Games
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts.
If damage is found, please contact your freight carrier rst.
Then, contact Bay Tek Games’ Service Department at 920.822.3951
or e-mail them at [email protected] for further assistance.

5
HOW TO PLAY
Press the button to stop the red bar on
the yellow dots.
Win tickets for successful hits.
50 in a row wins the jackpot!

6
GAME SPECIFICATIONS
SAFETY PRECAUTIONS
WEIGHT
NET WEIGHT 400 LBS.
SHIP WEIGHT 450 LBS.
DIMENSIONS
WIDTH 44.5”
DEPTH 44”
HEIGHT 97”
(88.75” without ‘hasp’)
OPERATING TEMPERATURE
FAHRENHEIT 80-100
CELSIUS 26.7-37.8
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE
100 to 120
VAC /220 to 240 VAC
INPUT FREQUENCY
RANGE 50 HZ / 60 HZ
MAX OPERATING
CURRENT
1.4 AMPS @ 115 VAC
.8 AMPS @ 230 VAC
DANGER
DO NOT perform repairs or maintenance on this game with the power ON.
Unplug the unit from the wall outlet or shut off the power strip located inside the cabinet.
!!
NOTICE
Modications to the mechanical, electrical and structural components of this game
may void its compliance certications.
!!
WARNING
Use of ammable subtances can cause sever burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kerosene or thinners.
!!
CAUTION
Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lifting and moving
devices are available when unloading, unpacking and moving this game.
!!
ATTENTION
Be sure the electrical power matches the game requirements. See the serial number located on the
back of the game cabinet. Always plug into a grounded circuit. If the supply cord is damaged, it must
be replaced by an approved cord or assembly provided by the manufacturer.
A shielded power cable must be used for the game to retain EU/EMC compliance.
!!
IN CASE OF EMERGENCY
UNPLUG THE POWER CORD.
The power cord must be accessible at all times in case of an emergency.
!!
This appliance is suitable for INDOOR, DRY locations only.

7
SETUP GUIDE WITH HASP
Remove back door of game and set
aside. Release the four latches - two
found inside the back of the cabinet on
both sides and two on the outside top.
Unhook the S hook and chain from the
bracket on the inside, left rear of the
cabinet.
Lower the monitor face/vacuum form
carefully.
CAUTION
USE CAUTION WHEN RELEASING THE
LATCHES! THE MONITOR FACE IS A FALL
HAZARD AND COULD CAUSE DAMAGE! GET
ASSISTANCE FROM SOMEONE IF NEEDED.
!!

8
SETUP GUIDE WITH HASP CONT.
Carefully lift the circular “Pop The Lock”
marquee piece on top of the monitor face
and slide into place, being careful not to
pinch the cable.
Locate the marquee hardware kit in the
cashbox.
Secure the marquee piece in place using
the 4 screws (circled in blue) and the 2
bolts and 2 washers (circled in pink) from
the hardware kit.

9
SETUP GUIDE WITH HASP CONT.
Route the cable from the circular piece
through the channel on the back of the
monitor face.
Plug cable CE5931 from the circular
marquee piece into cable CE5932.
Get assistance from someone and place
the hasp piece near it’s proper location.
Route cable CE 5926-1 from the hasp
piece, through the circle cut out in the
monitor face.

10
SETUP GUIDE WITH HASP CONT.
Lift the monitor face/vacuum form up
towards the monitor. Route all wires
through the rear before pinching them.
Rehook the latches in the top rear of the
cabinet to secure the face in place.
Plug the top marquee light cable (CE5931)
into CE5932.
Secure the hasp piece in place using the
four included bolts and washers. Tighten
in place.

11
SETUP GUIDE WITH HASP CONT.
Plug in cable CE5903 to cable
CE5926-1.
Plug in cable CE5930-1 to cable
CE5901.
Plug in cable 5918 to the small circuit
board on the side of the cabinet and
the single red wire from CE5932.
Replace the back door and lock. Place
game in desired location. Plug the
power cord into a standard electrical
outlet and turn the power strip inside
the front door to ON.

12
HEIGHT MODIFICATION OPTIONS

13
HOW TO: ACCESS MONITOR
Remove back door of cabinet and set off to
the side.
Unplug cables CE5919 and CE5930 from
the circuit board located to the left rear in
the back of the cabinet.
Release the four latches - two found inside
the back of the cabinet on both sides and
two on the outside top.
Unhook the S hook and chain from the
bracket on the inside, left rear of the
cabinet.
The front of the cabinet will release. You
may carefully lower the vacuum form and
expose the monitor face.
CAUTION
USE CAUTION WHEN RELEASING THE
LATCHES! THE MONITOR FACE IS A FALL
HAZARD AND COULD CAUSE DAMAGE! GET
ASSISTANCE FROM SOMEONE IF NEEDED.
!!

14
DIP SWITCH SETTINGS
The dip switch bank is located on the mainboard,
inside the front door of the game.
*factory default settings are highlighted below
SWITCH DESCRIPTION ON OFF
1 X
2New Jersey Programming X
3 X
4 X

15
MAIN MENU FUNCTIONS
Press and hold the MENU button
located inside the front door to access
the Main Menu.
Scroll through the options with the
MENU button.
Make your selections with the
MENU SELECT button.
MAIN MENU OPTIONS
CLEAR CREDITS/
TICKETS Press the MENU SELECT button 3 times to clear tickets and credits owed
RESET FACTORY
DEFAULTS Press MENU SELECT button 3 times to reset all settings to factory defaults
MUTE ON OFF
Factory defaults are highlighted below.

16
VOLUME & ATTRACT SETTINGS MENU
VOLUME & ATTRACT OPTIONS
ATTRACT VOLUME 0 1 2 3 4 5 6 7 8 9 10
GAME VOLUME 0 1 2 3 4 5 6 7 8 9 10
JACKPOT VOLUME 012345678910
ATTRACT TIMING
(MINUTES)
0
(OFF) 12345678910
BG MUSIC VOLUME 012345678910
BACKGROUND MUSIC ENABLED DISABLED
Factory defaults are highlighted below.
3

17
GAME SETTINGS MENU
GAME SETTINGS OPTIONS
TRAINING ATTEMPTS
Number of times game allows for player
to continue playing until a successful hit
is made
0 1 2 3 4 5
CONTINUE TIME
Amount of seconds allowed for a player
to insert credits & continue play
5s 10s 15s 20s 25s 30s
GAME MODE/PAYMENT NORMAL/TICKETS ENTERTAINMENT
ONLY/POINTS DEMO
ADVANCED SETTINGS Push MENU SELECT button 3 times to be taken into the sub-menu of
advanced settings (found on page 16 of the manual)
Factory defaults are highlighted below.

18
ADVANCED SETTINGS MENU
GAME SETTINGS OPTIONS
CONTINUES ALLOWED
Number of times game allows for player
to continue playing same game
UNLIMITED 0
(disabled)
TO
(INC 1) 5
DIAL SPEED
Adjusts overall game difficulty - making
the dial rotate slower or quicker
EASIEST EASY NORMAL HARD HARDEST
DIAL ACCELERATION
The rate of speed increase on the last
10 of the 50 hits
EASIEST EASY NORMAL HARD HARDEST
Factory defaults are highlighted below.
Normal

19
PAYOUT SETTINGS MENU
PAYOUT MENU OPTIONS
CREDITS PER PLAY FREE PLAY TO
(INC 1) 20 DEFAULT: 4
SWIPE PROMPT/CARD
READER
Changes “Credits 0/4” to “Swipe Card”
ENABLED DISABLED
PAPER TICKET VALUE 1 2
FIXED TICKETS 0TO
(INC 1) 30 DEFAULT: 0
MERCY TICKETS 0 1 2 3 4 5
TICKETS AWARDED FOR
AMOUNT OF HITS SET BELOW 123
NUMBER OF HITS TO WIN
ABOVE SELECTED AMOUNT OF
TICKETS
1 2 3 4 5 6 7 8 9 10
CONTINUE TICKETS 5TO
(INC 5) 500 DEFAULT: 100
JACKPOT TICKETS 50 TO
(INC 50) 2000 DEFAULT: 500
ACCUMULATE TICKETS
All tickets earned from hitting the dots
during play will be added to the jackpot/
continue value.
ENABLED DISABLED
Factory defaults are highlighted below.
100

20
TICKET PATTERNS
TICKET PATTERNS
AVG.
TIX PER
GAME
TIX/HIT
CONTINUE
BONUS
AMOUNT
JACKPOT
BONUS
AMOUNT
3 1/10 20* 50
9 1/3 20 100
18 1/4 50 250
20 1/3 50 250
25 1/2 50 250
33 1/3 100 500
37 2/4 100 500
45 1/3 150 750
50 2/4 150 750
58 1/3 200 1000
62 2/4 200 1000
74 1/1 200 1000
*ADJUST TO ONLY 1 CONTINUE ALLOWED IN ‘ADVANCED SETTINGS’