Bradley 5600 Series User manual

215-1681 Rev. A EN 10-07-003A
© 2010 Bradley Corporation
Page 1 of 2 5/3/2010
P.O. Box 309, Menomonee Falls, WI USA 53052-0309
PHONE 800.BRADLEY (800.272.3539) FAX [phone]
bradleycorp.com
Installation
IMPORTANT!
Read this entire installation manual to ensure proper installation. When
finished with the installation, file this manual with the owner or maintenance
department. Compliance and conformity to local codes and ordinances is
the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for
before discarding packaging material. If any parts are missing, do not begin
installation until you obtain the missing parts.
Make sure that all water supply lines have been flushed and then completely
turned off before beginning installation. Debris in supply lines can cause
valves to malfunction.
Product warranties may be found under “Products” on our web site at
bradleycorp.com.
Installation
THIS
SIDE
UP
Packing List
•
•
•
•
Hydraulic Push Button Assembly
COMBI5100, 5600 Series (S45-732)
Anti-Ligature Flush Valve Box
HSC79 (S45-2670)

S45-732 Installation
25/3/2010 Bradley Corporation • 215-1681 Rev. A EN 10-07-003A
This kit contains components to be used
with Bradley Security Hydraulic Flush Valve
Push Button Assembly and 1-1/4" dia. Valve
Button hole in backsplash.
AFrom fixture side, assemble escutcheon,
push button and bushing, and insert push
rod as shown.
BInsert assembly into 1-1/4" backsplash
hole and use mounting bracket to center
escutcheon. Push rod guide to secure
assembly tightly.
CAfter securing actuator to push rod guide,
connect tubing to actuator.
DConnect tubing from actuator to flush valve
per instructions included with flush valve
prepack. Test valve for proper operation.
Escutcheon
150-099
Standard Push Button 128-076
Anti-Ligature Push Button 128-187
Bushing-Push Rod
153-185 Push Rod
176-116
Combi Backsplash with
1-1/4" Sq. Flush Valve
Button Hole
Mounting Bracket
140-325
Guide-Push Rod
179-066
Actuator Tubing
(Shown for Clarity)
Sloan Hyd. Actuator (Shown
for Clarity: Included with
Flush Valve Prepack)
This button assembly can be used with both
Sloan Hy-71-A (Bradley Part No. 269-975)
and Sloan HY-50-A (Bradley Part No. 269-
1920) Actuators.