BROSA Junior Kids Desk User manual

ASSEMBLY GUIDE
Junior Kids Desk
v1.0

Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
Components
Leg x 4
Body x 1
What you need
A x 20
(Screw)
Hardware
1
2

Step 1 Align a leg (2) with the underside of the body (1) so
that the screw holes are overlapping. Insert a screw
(A) into a hole and tighten it with a Phillips screw-
driver. Repeat this for all four legs. With the help of a
partner lift the piece of furniture o the ground, turn
it upright and place it on a at surface.
A x 20
1
2
A

Step 2 Enjoy your new desk!

Standard Tip Kit Installation
Hardware
aa x 2
(Mounting Plate)
bb x 1
(Nylon Strap)
cc x 2
(Screw)
Pencil Drill
What you need
Wall Fixings
Because of the variety of wall compositions, we can’t provide you with appro-
priate wall xings. Please identify your wall composition and contact your
local hardware store to get the appropriate xings.
Wood
If xing to wood
make sure that it isn’t
chipboard as screws
can easily pull away
from the core struc-
ture.
Brick or Masonry
Use an appropriate
wall plug provided
you are sure your
wall is sound.
Cavity Wall
Special toggle wall
plugs are needed.
Seek expert advice.

1. Screw one of the brackets (aa) onto the top of the piece of furniture in the
middle at the back, using the short screws (cc) provided.
2. Position the piece against the wall where you want it to go, place the
second bracket (aa) onto the wall below the one xed to the piece and mark
where the holes come on the wall. Move the piece away from the wall.
aa
cc
aa
aa x 1
cc x 2
aa x 1

3. Attach the wall bracket using wall xings suitable for your type of wall.
4. Place the piece of furniture back against the wall so the two brackets match
up and tie them together with the plastic strap provided. e plates need
NOT match exactly, but the plastic tie must go through each plate. Slide the
thin end of the strap through the receiving end on the nylon strap. Close the
strap, but do not over tighten it.
bb
bb x 1