BROSA Hillary Wingback Armchair User manual

ASSEMBLY GUIDE
Hillary Wingback Armchair
v1.0

Components
Unpacking
Upon unpacking your armchair from it’s delivery box, you should have the body of
the armchair. Additional components are packed inside the body, you will learn how
to access and utilise these components in the next steps.
Turn the armchair body so that the underside is facing you. Follow the coloured
string to the component bag. Open it and take out the additional components.
Armchair body
Armchair body
A x 2 (Front Leg)
B x 2 (Back Leg)
C x 1 (Bottom Cover)
Hardware
E x 8 F x 1D x 8
What you need

Step 1 Place the armchair body on a level surface with the
bottom side facing you. Place a back leg (B) into the
back leg position. Fit a washer (E) to a bolt (D) and
screw into a hole using the Allen key (F). Repeat this
for the second bolt to secure the leg in it’s place.
Repeat the process for the other back leg and then
front legs (A).
E x 8
F x 1
D x 8
A
A
B
B
DE
F

Step 2 Remove the protection strip from the bottom edge of
the chair

Step 3 Place the bottom cover in place to cover the bottom
of the armchair.
C

Step 4 Gently lift the armchair and place it upright on a level
surface. Enjoy your new armchair!