BROSA Malamute User manual

ASSEMBLY GUIDE
Malamute Coee Table
v1.0

Components
Upon unpacking your coee table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new coee table.
What you need
Hardware
A x 16
Spec: Ø6 x 18mm
B x 4
Spec: Ø6 x 30mm
C x 20
Spec: Ø6 x 10 x 1.8mm
D x 20
Spec: Ø6 x 12 x 1.5mm
E x 1
Spec: M4
Table top x 1
Leg (2) x 2
Leg (3) x 2
Shelf x 1
1
2
2
3
4
3

Step 1
A x 16
B x 4
C x 20
D x 20
E x 1
1.1 Align a leg (2 or 3) to the shelf (4) so that the
screw holes overlap and have another person hold it
in place. Fit a spring washer (C) to a bolt (B) followed
by a at washer (D) and screw it into the hole, using
the allen key (E) to tighten in place. Repeat process
for the remaining legs (2 & 3).
1.2 Align the structure formed in Step 1.1 to the
underside of the table top (1) so that the screw holes
overlap. Fit a spring washer (C) to a bolt (A) followed
by a at washer (D) and screw into a hole, using the
allen key (E) to tighten. Repeat for the remaining
bolts to secure the structure to the table top (1).
1
2
3
2
3
4
D
B
C
E
D
A
C
E
Step 1.1
Step 1.2

Step 2 Gently lift the table and place upright on a level
surface. Enjoy your new coee table!