BROSA Enzo Large Bookcase User manual

ASSEMBLY GUIDE
Enzo Large Bookcase
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Hardware
What you need
A x 8
Side Panel x 1
Side Panel x 1
Top Panel x 1
Drawer x 1
Base Frame x 1
Shelf x 3
Shelf with Rails x 2
Back Panel x 3
B x 8 C x 8 D x 16 E x 34 F x 1
1
2
3
4
5
6
7
8
9
10

Step 1 Align a shelf with rails (8) with a side panel (2),
making sure the bolt holes overlap. Fit a washer (D)
to a short bolt (B) and insert the bolt into the hole.
Fix the bolt with the Allen key (F). Repeat this for the
other hole and then repeat the process for the other
shelf with rails (8).
B x 4
D x 4
F x 1
B
F
D
2
8
8

Step 2 Insert wooden dowels (A) into the outer holes of the
base frame (10).
A x 4
A
10

Step 3 Align the base frame (10) with the side panel using
the wooden dowels. Fit a washer (D) to a long bolt
(C) and insert the bolt into the hole. Fix the bolt with
the Allen key (F). Repeat this for the other hole.
10
C x 2
D x 2
F x 1
C
F
D

Step 4 Align the other side panel (3) with the structure
formed in Step 3. Repeat the previous steps for
shelves with rails and base frame to attach the side
panel to the formed structure.
C x 2
D x 6
F x 1
B x 4
3
BD
BD
CD

Step 5 Insert the wooden dowels (A) into the outer holes of
the top panel (1).
A x 4
1
A

Step 6 Align the top panel (1) with the formed structure
using the wooden dowels. Fit a washer (D) to a long
bolt (C) and insert the bolt into the hole. Fix the bolt
with the Allen key (F).
1
C x 4
D x 4
F x 1 CF
D

Step 7 Slide the tongue into the groove so that the back
panels are joined together.
456

Step 8 With the help of another person, lift the bookcase
and place it upright on the level surface. Align the
formed back panel with the formed space on the
back of the body and secure it in place using the
screws (E) and a Phillips screwdriver.
E x 34
E