BROSA Mia Oak Veneer Chair User manual

ASSEMBLY GUIDE
Mia Oak Veneer Chair

Components
Upon unpacking your chair from it’s delivery box, you should have the
pieces shown below. Follow the steps on the next pages to assemble
your new chair.
Front leg frame Left apron
x 2 x 2
2 5
Seat pad x 2
3
Back leg frame Right apron
x 2 x 2
1 4
Item Qty.Description Item Qty.Description
A
C
B
D
F
E
Grub screw
Steel dowel
Hex head bolt
M6x15
Allen key
M5x30x107
Allen key
M4x30x107
Seat bracket
x 8
x 8
x 4
x 4
x 1
x 1

Step 1 Lay all parts on on a at and stable surface. Attach steel
dowels (B) into back leg frame (1) and front leg frame (2) by
screwing dowels (B) into the inset ttings that are located on
back leg frame (1) and front leg frame (2) as shown. Ensure the
direction of the holes on dowels (B) are facing correctly as per
diagram.
Step 2 Attach aprons (4), (5) onto back leg frame (1) as shown. Ensure
end of aprons are aligned with back leg frame. Secure aprons
(4), (5) to back leg frame (1) using grub screws (A) as shown.
Use allen key (E) to turn screws (A) clockwise to tighten.
B x 4
A x 2
E x 1

Step 3 Attach front leg frame (2) onto aprons (4), (5) as shown. Ensure
end of aprons are aligned with front leg frame. Secure front leg
frame (2) to aprons (4), (5) using grub screws (A) as shown.
Use allen key (E) to turn screws (A) clockwise to tighten.
A x 2
E x 1

Step 4 Place seat pad (3) on a at and stable surface. Lower and align
chair frame onto seat pad (3) as shown. Ensure locator is
inside front leg frame (3).

Step 5 5.1 Insert seat brackets (D) into the slots on aprons
(4), (5) as shown. Ensure holes on seat brackets (D) are aligned
correctly with holes on seat pad (3) before attaching.
5.2 Secure seat pad (3) to aprons (4), (5) using hex head bolts
(C). Use allen key (F) to turn bolts (C) clockwise to tighten.
Repeat the complete process for second chair.
C x 2
D x 2
F x 1

Step 6 Assembly is complete. Enjoy your chair!