BROSA Tallinn Bedside Table User manual

ASSEMBLY GUIDE
Tallinn Bedside Table
v1.0

Components
Upon unpacking your bedside table from it’s delivery box, you should have
the separate pieces shown below. Follow the steps on the next pages to
assemble your new bedside table.
Bedside table x 1
Hardware
A x 2 B x 4
Spec: Ø3.5mm x L11mm Spec: Ø3.8mm x L16mm
C x 10
Leg frame x 1
What you need
2
1

Step 1
Step 2
Align leg frame (2) to the underside of the bedside
table (1). Insert a screw (C) into a hole, using the screw
driver to tighten. Repeat for all of the remaining bolts.
Align a handle (A) to its corresponding spot on the
drawer front panel and use screws (B) to secure it into
place. Repeat for the remaining handles (A).
A x 2
B x 6
C x 10 1
2

Step 3 Gently lift the bedside table and place upright on a
level surface. Enjoy your new bedside table!