Cisco MX300 G2 Instruction Manual

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
This installation guide covers MX300 G2 with a floor stand.
Dimensions
Height: 1521 mm / 59.9 in.
Width: 1278mm / 50.4in.
Depth: 671 mm / 26.5in.
Weight total: 53kg / 117 lb
Weight monitor: 35kg / 78lb
Manpower
Two people working together are required to mount the
monitor to the base module.
Room setup
Explore the Meeting Room – London scenario on the Cisco Project
Workplace, http://www.cisco.com/go/projectworkplace, to find
inspiration and guidelines when preparing your office or meeting
room for video conferencing.
Documentation
The user documentation for this product, including compliance
and safety information, is available on the Cisco web site,
http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
C
D
A
B
E
• Floor stand base
• Column
• Base covers
• Screws for mounting the base
• Screwdriver
Back cover
Monitor
Accessories:
• Microphones
• Cables
• Screws for mounting
the monitor
• Gloves
Touch controller

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
1Mounting the floor stand
4 × M6x16
A

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
2Mounting the monitor
Use gloves when
handling the monitor.
Remove the cable
channel lid for now.
You need it in step 4.
The monitor may be tilting slightly
forward. If you gently pull it to a vertical
position, the screws enter more easily.
Front
4 × M6x16
B C

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
3Connecting the cables
For maintenance only
Reset to factory settings
Audio line output
Always use the provided
power cable.
The wall socket outlet must
be easily accessible after
installation.
Power switch
Audio line input
LAN **
Video input
(e.g. PC *)
Video output
(e.g. 2nd display *)
Power
(100-240 VAC,
50/60 Hz) Microphones
Touch
controller **
USB, for future use
HDMI
DVI-I
*Optional
** Use the cable that is labeled
with for the Touch controller;
use the cable that is labeled
with for the LAN
C D

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
5Starting up the system
• Connect to power and LAN/Ethernet.
• Switch on the system. The power switch is next
to the power connector at the rear side of the
system.
Wait while the unit starts up. Normally this takes a few minutes.
It may include automatic software upgrade and restart of the
Touch controller.
• If prompted, follow the instructions on the Touch controller to
set the language etc.
• If your system is not set up to be automatically provisioned,
you must configure the system before you can make your first
call. This is described in the Getting Started Guide, which is
available on the Cisco web site.
Never move the camera manually when power is switched on;
always use the camera control function on the Touch controller
to change the camera position.
4Leading out the cables
Snap on the cable
channel lid for strain relief.
Lead the cables in the cable slots. Lead them
out at the front or back as appropriate.
Lead the cables around the cable slot several
times if the cables are longer than you need.

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
On our web site you will find an overview of the
worldwide Cisco contacts.
Go to: http://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
EMC Class A declaration
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.
声
明
此为
A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
Lift this handle to
lock/unlock the back
cover. Use both
hands if required.
6Mounting the covers
12
3
A E