Cleveland MKDT-20-T User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity_______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio,U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site:www.ClevelandRange.com
Email: [e-mail]
MIXER KETTLES
MIXER KETTLE, ELECTRIC
FLOOR TYPE, LEVER TILT
2/3 JACKETED
MODELS:cMKDT-20-T
Cleveland Standard Features
nInfinitely Variable Speed for all conditions; Scraper from
0-70 rpm, Agitator from 0-20 rpm
nRemovable (without tools) Nylon Blade scrapes entire
Jacketed surface
n3/4 Horsepower D.C. Timing Belt Drive
nSafety Device prevents high speed starts
nMixing stops when Bridge is lifted
nAgitator and Scraper are bayonet mounted for easy removal
nEnclosed, balanced, 10 Gauge Stainless Steel Mixer Bridge
nKettle and all exterior surfaces are stainless steel
nSteam Control Valve built into Trunnion
nFactory installed Steam Control Kit
n50 psi Steam Jacket Rating
nTilt Handle interchangeable for left or right operation
nLarge Pouring Lip
nDouble Pantry Faucet Standard
nGallon Markings on Scraper Shaft
nStandard 120 volts, 60 Hz, single phase, 3 wire
nTypical approvals include NSF and ASME
Options & Accessories
pCovers (MTP)
pProduct Time/Temperate Controls and Indicators
pFood Strainer (FS-12)
pFlow Diverter (FD)
pKettle Accessory Kit (KAK) includes:
pClean-up Brush (CB) p36˝ Kettle Paddle (KP)
p36˝ Kettle Whip (KW) p36˝ Kettle Brush (KB)
pDraw-offBrush (DB) p24 oz. Ladle (KL)
pPressure Reducing Valve (PRV-K)
pType 316 Stainless Steel Kettle Interior for high acid food
products (316-12G)
pWater Meter (GMF or LMF) Wall Mount or on Stand (SWM)
Shall be Cleveland, model MKDT-20-T, Floor Type, Lever Tilt, 20
gallon, Direct Steam Mixer Kettle, 50 psi Jacket Rating, Factory
Installed Steam Control Kit, Steam Control Valve built into Trunnion.
Infinitely Variable Speed, 3/4 H.P
. Time Belt Drive, Bayonet
Mounted Agitator and Scraper with removable Blades, Safety
Device prevents high speed starts. Mixing stops when Bridge is
lifted. Kettle and all Exterior Surfaces are Stainless Steel.
Short Form Specifications
SECT. XI PAGE 11
0707

SECT. XI PAGE 12
0707
Litho in USA
(NOT TO SCALE)
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.