Coalesse Emu User manual

Page 1 of 3
939500506 Rev B
™
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©2010 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
Cross Chair
with Seat Cushion
Cross Chair
with Seat Cushion and Pillow
Cross Seating Cushion
The emu logo is a registered trademark of EMU GROUP S.P.A.. ITALY.

Page 2 of 3
939500506 Rev B
2
1a
1b
Installing a Seat
Cushion to a Chair
1. On the seat cushion, locate
each ball and string. There are
four (4) total. Press button on
ball inward (1a) and slide ball
off string (1b).
2. Lower the seat cushion onto
the chair and carefully thread all
four (4) strings through the
chair webbing.
3. Place each ball back onto
string and slide upward (3a) so
it fits snugly under the chair
webbing (3b).
BALL
BUTTON
CHAIR
WEBBING
STRING
3a
3b
SEAT CUSHION

3
1a
1b
2
BALL
BUTTON
CHAIR
WEBBING
STRING
4a
4b
Page 3 of 3
939500506 Rev B
Installing a Seat
Cushion with Pillow
to a Chair
1. On the seat cushion, locate
each ball and string. There are
four (4) total. Press button on
ball inward (1a) and slide ball
off string (1b).
2. Route rear seat cushion
strings through each eyelet on
the pillow as shown.
3. Lower the seat cushion and
pillow onto the chair and
carefully thread all four (4)
strings through the chair
webbing.
4. Place each ball back onto
string and slide upward (4a) so
it fits snugly under the chair
webbing (4b).
SEAT CUSHION
PILLOW