Crosswater Fenmore 7 28-60 User manual

28-67
28-65
28-60
24"
26
1
8
"
3
4"
1
3
4
"
18"
20
1
8
"
3 8"
Φ2
1
8
"
25
8"
3"
5 8"
3"
7"
9
1
8
"
3 8"
3 8"
llen Wrench
For eas installation you will need:
●To read the installation completely before
beginning.
●To read all warnings, care, and maintenance information.
Installation Instructions
Fenmore 24",18"& 7" Towel Bars
28-67,28-65,28-60
4 1

Determine the location of the towel
bar.
Align brackets and mark drill holes
in desired location. Drill 1/4" holes in marked locations
Drive the wall anchors into the drilled
holes with a Phillips screwdriver.
Place the mounting brackets over
the wall anchors. Secure them to
the wall using the supplied screws.
Temporarily place the towel bar on
the mounting brackets to check
alignment. If necessary, loosen the
screws and realign the mounting
brackets.
Place towel bar assembly on the
mounting brackets. Secure it to the
wall using the bottom set screws.
1
2
34
00071
00101** & 00102**
00839
Post assembly
00124**
24" Bar
18" Bar 00118**
Anchors,Brackets and mounting screws
Set screws
Note:
The suffixes of ** represent different finishes
7" Bar 00107**
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain
and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Warranty
For further information contact Crosswater , 393 Fortune Blvd., Milford, MA 01757 www.crosswater .com
Toll free number: 844-XWATER-1 (844-992-8371) tel: 508-381- fax: [phone] email: technical@crosswater .com
Issue date: 01092022
28-67
28-65
28-60
28-67
28-65
28-60
4
2 3

Determine the location of the towel
bar.
Align brackets and mark drill holes
in desired location. Drill 1/4" holes in marked locations
Drive the wall anchors into the drilled
holes with a Phillips screwdriver.
Place the mounting brackets over
the wall anchors. Secure them to
the wall using the supplied screws.
Temporarily place the towel bar on
the mounting brackets to check
alignment. If necessary, loosen the
screws and realign the mounting
brackets.
Place towel bar assembly on the
mounting brackets. Secure it to the
wall using the bottom set screws.
1
2
34
00071
00101** & 00102**
00839
Post assembly
00124**
24" Bar
18" Bar 00118**
Anchors,Brackets and mounting screws
Set screws
Note:
The suffixes of ** represent different finishes
7" Bar 00107**
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain
and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Warranty
For further information contact Crosswater , 393 Fortune Blvd., Milford, MA 01757 www.crosswater .com
Toll free number: 844-XWATER-1 (844-992-8371) tel: 508-381- fax: [phone] email: technical@crosswater .com
Issue date: 01092022
28-67
28-65
28-60
28-67
28-65
28-60
4
2 3

28-67
28-65
28-60
24"
26
1
8
"
3
4"
1
3
4
"
18"
20
1
8
"
3 8"
Φ2
1
8
"
25
8"
3"
5 8"
3"
7"
9
1
8
"
3 8"
3 8"
llen Wrench
For eas installation you will need:
●To read the installation completely before
beginning.
●To read all warnings, care, and maintenance information.
Installation Instructions
Fenmore 24",18"& 7" Towel Bars
28-67,28-65,28-60
4 1