Crosswater Wisp Series User manual

Wisp Series Accessories
Installation Instructions
US-WP023
US-WP028
US-WP013
US-WP029
Check that there are no concealed water pipes or electrical cables before drilling into the wall.
The product should be installed by a professional, following the recommended installation.
Before beginning installation, check for any damage that may have occurred during transport.
Note: Damage claims cannot be made during or after installation.
CLEANING INSTRUCTIONS
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water
and dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on
the product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot
buildup. Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine,
drain and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the
warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Warranty - This Crosswater London product is
covered by a limited lifetime warranty.
For full details, terms and conditions please visit our
website.
For further information contact:
Crosswater London, 393 Fortune Blvd., Milford, MA
01757
Toll free number: 844-XWATER-1 (844-992-8371)
tel: [phone] fax: [phone]
www.crosswaterlondon.com
email: [email protected]

Wisp Series Accessories
Installation Instructions
Check that there are no concealed water pipes or electrical cables before drilling
into the wall.
The product should be installed by a professional, following the recommended
installation.
Before beginning installation, check for any damage that may have occurred during
transport.
Note: Damage claims cannot be made during or after installation.
US-WP021
Issue date: 15092019