D-Link DPH-120SE User manual

Safety Notices
Please read the following safety notices before installing or using this phone. They
are crucial for the safe and reliable operation of the device.
 Please use the external power supply that is included in the package. Other
powers supplies may cause damage to the phone, affect the behavior or induce
noise.
 Before using the external power supply in the package, please check with
home power voltage. Inaccurate power voltage may cause fire and damage.
 Please do not damage the power cord. If power cord or plug is impaired, do
not use it, it may cause fire or electric shock.
 The plug-socket combination must be accessible at all times because it serves
as the main disconnecting device.
 Do not drop, knock or shake it. Rough handling can break internal circuit
boards.
 Do not install the device in places where there is direct sunlight. Also do not
put the device on carpets or cushions. It may cause fire or breakdown.
 Avoid exposure the phone to high temperature, below 0℃ or high humidity.
Avoid wetting the unit with any liquid.
 Do not attempt to open it. Non-expert handling of the device could damage it.
Consult your authorized dealer for help, or else it may cause fire, electric
shock and breakdown.
 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
Wipe it with a soft cloth that has been slightly dampened in a mild soap and
water solution.
 When lightning, do not touch power plug or phone line, it may cause an
electric shock.
 Do not install this phone in an ill-ventilated place.
 You are in a situation that could cause bodily injury. Before you work on any
equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents.

Table of Content
1 INTRODUCING DPH-120S/DPH-120SE VOIP PHONE ................................................................ 6
1.1 THANK YOU FOR YOUR PURCHASING DPH-120S/DPH-120SE ....................................................... 6
1.2 DELIVERY CONTENT ....................................................................................................................... 6
1.3 KEYPAD ................................................................................... ERROR! BOOKMARK NOT DEFINED.
1.4 PORT FOR CONNECTING .................................................................................................................. 7
1.5 ICON INTRODUCTION ...................................................................................................................... 8
1.6 LED INTRODUCTION ....................................................................................................................... 9
2 INITIAL CONNECTING AND SETTINGS .....................................................................................10
2.1 CONNECT THE PHONE ....................................................................................................................10
2.1.1 Connect to network ...................................................................................................................10
2.1.2 Power adaptor connection ........................................................................................................ 11
2.2 BASIC INITIALIZATION ................................................................................................................... 11
2.2.1 Network settings ....................................................................................................................... 11
3 BASIC FUNCTION ............................................................................................................................13
3.1 MAKING A CALL ............................................................................................................................13
3.1.1 Call Device ...............................................................................................................................13
3.1.2 Call Methods.............................................................................................................................13
3.2 ANSWERING A CALL ......................................................................................................................13
3.3 DND ..............................................................................................................................................14
3.4 CALL FORWARD ............................................................................................................................14
3.5 CALL HOLD ...................................................................................................................................14
3.6 CALL WAITING ..............................................................................................................................14
3.7 MUTE ............................................................................................................................................14
3.8 CALL TRANSFER ............................................................................................................................15
3.9 3-WAY CONFERENCE CALL .............................................................................................................15
3.10 MULTIPLE-WAY CALL .....................................................................................................................15
4 ADVANCED FUNCTION ..................................................................................................................16
4.1 CALL PICKUP .................................................................................................................................16
4.2 JOIN CALL ......................................................................................................................................16
4.3 REDIAL / UNREDIAL.......................................................................................................................16
4.4 CLICK TO DIAL ...............................................................................................................................17
4.5 CALL BACK ....................................................................................................................................17
4.6 AUTO ANSWER ...............................................................................................................................17
4.7 HOTLINE ........................................................................................................................................17
4.8 APPLICATION .................................................................................................................................17
4.8.1 SMS ...........................................................................................................................................17
4.8.2 Memo ........................................................................................................................................18
4.8.3 Voice Mail ................................................................................................................................18
4.9 PROGRAMMABLE KEY CONFIGURATION .................................. ERROR! BOOKMARK NOT DEFINED.

5 OTHER FUNCTIONS ........................................................................................................................19
5.1 AUTO HANDDOWN ........................................................................................................................19
5.2 BAN ANONYMOUS CALL................................................................................................................19
5.3 DIAL PLAN .....................................................................................................................................19
5.4 DIAL PEER .....................................................................................................................................19
5.5 AUTO REDIAL ................................................................................................................................19
5.6 CALL COMPLETION ........................................................................................................................20
5.7 RING FROM HEADSET .............................................................. ERROR! BOOKMARK NOT DEFINED.
5.8 POWER LIGHT ................................................................................................................................20
5.9 HIDE DTMF ..................................................................................................................................20
5.10 PASSWORD DIAL ............................................................................................................................20
5.11 ACTION URL & ACTIVE URI .........................................................................................................20
5.12 PUSH XML ....................................................................................................................................21
6 BASIC SETTINGS ..............................................................................................................................22
6.1 KEYBOARD ....................................................................................................................................22
6.2 SCREEN SETTINGS .........................................................................................................................22
6.3 RING SETTINGS ..............................................................................................................................22
6.4 VOICE VOLUME .............................................................................................................................22
6.5 TIME & DATE ................................................................................................................................22
6.6 GREETING WORDS .........................................................................................................................23
6.7 LANGUAGE ....................................................................................................................................23
7 ADVANCED SETTINGS ...................................................................................................................24
7.1 ACCOUNTS.....................................................................................................................................24
7.2 NETWORK ......................................................................................................................................24
7.3 SECURITY ......................................................................................................................................24
7.4 MAINTENANCE ..............................................................................................................................24
7.5 FACTORY RESET .............................................................................................................................24
8 WEB CONFIGURATION ..................................................................................................................25
8.1 INTRODUCTION OF CONFIGURATION ..............................................................................................25
8.1.1 Ways to configure .....................................................................................................................25
8.1.2 Password Configuration ...........................................................................................................25
8.2 SETTING VIA WEB BROWSER ..........................................................................................................25
8.3 CONFIGURATION VIA WEB............................................................................................................26
8.3.1 BASIC .......................................................................................................................................26
8.3.1.1 STATUS ......................................................................................................................................... 26
8.3.1.2 WIZARD ........................................................................................................................................ 27
8.3.1.3 CALL LOG .................................................................................................................................... 29
8.3.1.4 LANGUAGE .................................................................................................................................. 29
8.3.2 NETWORK ...............................................................................................................................30
8.3.2.1 WAN .............................................................................................................................................. 30
8.3.2.2 LAN ................................................................................................................................................ 32
8.3.2.3 QoS&VLAN ................................................................................................................................... 33

8.3.2.4 SERVICE PORT ............................................................................................................................ 35
8.3.2.5 DHCP SERVICE ............................................................................................................................ 37
8.3.2.6 TIME&DATE ................................................................................................................................. 38
8.3.3 VOIP .........................................................................................................................................40
8.3.3.1 SIP .................................................................................................................................................. 40
8.3.3.2 STUN.............................................................................................................................................. 48
8.3.3.3 DIAL PEER .................................................................................................................................... 49
8.3.4 PHONE .....................................................................................................................................52
8.3.4.1 AUDIO ........................................................................................................................................... 52
8.3.4.2 FEATURE ...................................................................................................................................... 54
8.3.4.3 DIAL PLAN ................................................................................................................................... 58
8.3.4.4 CONTACT...................................................................................................................................... 60
8.3.4.5 REMOTE CONTACT .................................................................................................................... 62
8.3.4.6 WEB DIAL ..................................................................................................................................... 63
8.3.5 FUNCTION KEY ......................................................................................................................63
8.3.5.1 FUNCTION KEY ........................................................................................................................... 63
8.3.5.2 SOFTKEY ...................................................................................................................................... 64
8.3.6 Maintenance .............................................................................................................................65
8.3.6.1 Auto Provision ................................................................................................................................ 65
8.3.6.2 SYSLOG ........................................................................................................................................ 67
8.3.6.3 CONFIG ......................................................................................................................................... 69
8.3.6.4 UPDATE ........................................................................................................................................ 69
8.3.6.5 ACCESS ......................................................................................................................................... 71
8.3.6.6 REBOOT ........................................................................................................................................ 72
8.3.7 SECURITY ................................................................................................................................72
8.3.7.1 WEB FILTER ................................................................................................................................. 72
8.3.7.2 FIREWALL .................................................................................................................................... 73
8.3.7.3 NAT ................................................................................................................................................ 74
8.3.7.4 VPN ................................................................................................................................................ 76
8.3.7.5 SECURITY..................................................................................................................................... 78
8.3.8 LOGOUT ..................................................................................................................................78
9 APPENDIX ..........................................................................................................................................79
9.1 SPECIFICATION ..............................................................................................................................79
9.1.1 Hardware ..................................................................................................................................79
9.1.2 Voice features ............................................................................. Error! Bookmark not defined.
9.1.3 Network features ......................................................................... Error! Bookmark not defined.
9.1.4 Maintenance and management ................................................... Error! Bookmark not defined.
9.2 DIGIT-CHARACTER MAP TABLE ......................................................................................................79

1 Introducing DPH-120S/DPH-120SE VoIP
Phone
1.1 Thank you for your purchasing
DPH-120S/DPH-120SE
Thank you for your purchasing DPH-120S/DPH-120SE. DPH-120S/DPH-120SE
is a full-feature telephone that provides voice communication over the same data
network that your computer uses. This phone’s functions not only much like a
traditional phone, allowing to place and receive calls, and enjoy other features that
traditional phone has, but it also own many data services features which you could
not expect from a traditional telephone.
This guide will help you easily use the various features and services available on
your phone.
1.2 Delivery Content
Please check whether the delivery contains the following parts:
IP Phone are designed to look like conventional phones, the following photo
shows a broad overview of the IP Phone.
Item Description
IP Phone DPH-120S/DPH-120SE Phone with display and
keypad.
Power Adapter Power supply for telephone.
Network Cable Used to access network for the phone.
Handset Make phone calls with the phone’s basic functions.
Handset Cord Connected with the handset and the phone.
Quick Installation Guide Quick install the DPH-120S/DPH-120SE guide.
CD Containing manual and quick installation guide.
Warranty Safety Information Warranty Safety Information for
DPH-120S/DPH-120SE.

1.3 Keypad
Key Key name Function Description
Navigation
These keys are used in many areas of phone
operation.
Depending on the application they will have
different functions.
Headset The key use to link the headphone.
Volume -/+ Adjust the volume by pressing these two keys.
Redial When off hook, this will dial the last called
number.
Instand-by mode, it will check the Outgoing Call.
Speaker
phone Activate speakerphone mode.
Indicator
light This light blinks to indicate a missed call.

Softkey
1/2/3/4
Various functions depending on the phone mode.
Description will be shown in LCD.
Keyboard Dial phone numbers
1.4 Port for connecting
Port Port name Description
Power switch Input: 5V AC, 1A
WAN 10/100M Connect it to Network
LAN 10/100M Connect it to PC
Handset Port type: RJ-9 connector
1.5 Icon introduction
Icon Description
Call out
Call in
Call hold
Auto answer
Call mute
Contact
DND(Do not Disturb)

In hand-free mode
In handset mode
In headset mode
SMS
Missed call
Call forward
1.6 LED introduction
Power Indication LED (Power Light Enabled)
LED Status Description
Steady red Power on.
Blinking red There is an incoming call.
Off Power off.
Power Indication LED (Power Light Disabled)
LED Status Description
Blinking red There is an incoming call

2 Initial Connecting and Settings
2.1 Connect the phone
Connect to network
Step 1: Connect the IP Phone to the corporate IP telephony network. Before you
connect the phone to the network, please check if your network can work
normally.
You can do this in one of two ways, depending on how your workspace is set up.
Direct network connection—by this method, you need at least one available
Ethernet port in your workspace. Use the Ethernet cable in the package to connect
WAN port on the back of your phone to the Ethernet port in your workspace.
Since this VoIP Phone has router functionality, whether you have a broadband
router or not, you can make direct network connect. The following two figures are
for your reference.
Shared network connection—Use this method if you have a single Ethernet port in
your workspace with your desktop computer already connected to it. First,
disconnect the Ethernet cable from the computer and attach it to the WAN port on
the back of your phone. Next, use the Ethernet cable in the package to connect
LAN port on the back of your phone to your desktop computer. Your IP Phone
now shares a network connection with your computer. The following figure is for
your reference.
Step 2: Connect the handset to the handset port by the handset cable in the
package.

Step 3: connect the power supply plug to the AC5V adapter port on the back of
the phone. Use the power cable to connect the power supply to a standard power
outlet in your workspace.
Step 4:push the on/off switch on the back of the phone to the one side, then the
phone’s LCD screen displays “Initializing wait logon”. Later, a ready screen
typically displays the date, time.
If your LCD screen displays different information from the above, you need refer
to the next section “Initial setting” to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is
ready to use.
Power adaptor connection
Make sure that the power you use is comply with the parameters of power adaptor.
1. Plug power adaptor to power socket.
2. Plug power adaptor’s DC output to the DC5V port of DPH-120S/DPH-120SE
to start up.
3. There will be displayed black line and “INITIALIZING” on the screen. After
finishing startup, phone will show greeting, current date and time and so forth.
4. If phone has registered to the server, you can place or answer calls.
2.2 Basic Initialization
DPH-120S/DPH-120SE is provided with a plenty of functions and parameters for
configuration. User needs some network and VoIP knowledge so that user could
understand the meanings of parameters. In order to make user use the phone more
easily and convenient, there are basic configurations introduced which is
mandatory to ensure phone calls.
Network settings
Make sure that network is connected already before setting network of phone.
DPH-120S/DPH-120SE uses DHCP to get WAN IP configurations, so phone
could access to network as long as there is DHCP server in it. If there is no DHCP
server available, phone has to be changed WAN network setting to Static IP or
PPPoE.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->WAN settings->Connection Mode, enter and choose PPPoE through
navigation keys and press the Save key.

3. Press Back, then choose PPPoE Set, press Enter.
4. The screen will show the current information.Press Del to delete it, then input
your PPPoE user and password and press Save.
5. Press Back six times to return to the idle screen.
6. Check the status. If the screen shows “Negotiating…”it shows that the phone is
trying to access to the PPPoE Server; if it shows an IP address, then the phone has
already get IP with PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network’s parameters first, such as IP Address, Net mask,
Default Gateway and DNS server IP address. If you don’t know this information,
please contact the service provider or technician of network.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->WAN settings->Connection Mode, enter and choose Static through
navigation keys and press the Save key.
3. Press Back, then choose Static Set, press Enter.
4. The screen will show the current information, and then press Del to delete.
Input your IP address, Mask, Gateway, DNS and press Save to save what you
input.
5. Press Back six times to return to the idle screen.
6. Check the status, the screen shows “Static” .the screen shows the IP address
and gateway which were set just now, if the phone could display the right time, it
shows that Static IP mode takes effect.
Setting DHCP mode
1. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->WAN settings->Connection Mode, enter and choose DHCP through
navigation keys and press the Save key.
2. Press back six times to return to the idle screen.
3. Check the status, the screen shows “DHCP”, if the screen shows the IP address
and gateways which were set just now, it shows that DHCP mode takes effect.

3 Basic Function
3.1 Making a call
Call Device
You can make a phone call via the following devices:
1. Pick up the handset, icon will be showed in the idle screen.
2. Press the Speaker button, icon will be showed in the idle screen.
3. Press the Headset button if the headset is connected to the Headset Port in
advance. The icon will be showed in the idle screen.
You can also dial the number first, and then choose the method you will use to
speak to the other party.
Call Methods
You can press an available line button if there is more than one account, then
1. Dial the number you want to call.
2. Press History softkey, use the navigation buttons to highlight your choice
(press Left/Right button to choose Missed Calls, Incoming Calls and Outgoing
Calls.
3. Press the R/SEND button to call the last number called.
4. Press the programmable keys which are set as speed dial button.
Then press the Send button or Dial softkey to make the call if necessary.
3.2 Answering a call
Answering an incoming call
1. If you are not on another phone, lift the handset using, or press the Speaker
button/ Answer softkey to answer using the speakerphone, or press the headset
button to answer the headset.
2. If you are on another call, press the answer softkey.
During the conversation, you can alternate between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.

3.3 DND
Press DND softkey to active DND Mode. Further incoming calls will be rejected
and the display shows: icon. Press DND softkey twice to deactivate DND
mode. You can find the incoming call record in the Call History.
3.4 Call Forward
This feature allows you to forward an incoming call to another phone number. The
display showed icon.
The following call forwarding events can be configured:
Off: Call forwarding is deactivated by default.
Always: Incoming calls are immediately forwarded.
Busy: Incoming calls are immediately forwarded when the phone is busy.
No Answer: Incoming calls are forwarded when the phone is not answered
after a specific period.
To configure Call Forward via Phone interface:
1. Press Menu ->Features->Enter->Call Forwarding->Enter.
2. There are 4 options: Disabled, Always, Busy, and No Answer.
3. If you choose one of them (except Disabled), enter the phone number you
want to forward your call to. Press Save to save the changes.
3.5 Call Hold
1. Press the Hold button or Hold softkey to put your active call on hold.
2. If there is only one call on hold, press the hold softkey to retrieve the call.
3. If there are more than one call on hold, press the line button, and the Up/Down
button to highlight the call, then press the Unhold button to retrieve the call.
3.6 Call Waiting
1. Press Menu ->Features->Enter->Call Waiting->Enter.
2. Use the navigation keys to active or inactive call waiting.
3. Then press the Save to save the changes.
3.7 Mute
Press Mute button during the conversation, icon will be showed in the LCD.
Then the called will not hear you, but you can hear the called. Press it again to get
the phone to normal conversation.

3.8 Call transfer
1. Blind Transfer
During talk, press the key Transf, and then dial the number that you want to
transfer to, and finished by"#". Phone will transfer the current call to the third
party. After finishing transfer, the call you talk to will be hanged up. User cannot
select SIP line when phone transfers call.
2. Attended Transfer
During talk, press the key Transf, then input the number that you want to transfer
to and pressSend. After that third party answers, then press Transfer to complete
the transfer.(You need enable call waiting and call transfer first). If there are two
calls, you can just talk to one, and keep hold to the other one. The one who is keep
hold cannot speak to you or hear from you. In other way, if user wants to invite the
third party during the call,they can press Conf to make calls mode in conference
mode. If user wants to stop conference, user can press Split. (User must enable call
waiting and three way call first).
Note: the server that user uses must support RFC3515 or it might not be used
3. Alert Transfer
During the talk, press Transf firstly, and then press Send after inputting the
number that you want to transfer. You are waiting for connection, now, press
Transfand the transfer will be done. (To use this feature, you need enable call
waiting and call transfer first).
3.9 3-way conference call
1. Press the Conf softkey during an active call.
2. The first call is placed on hold. Then you will hear a dial tone. Dial the
number to conference in, then press Send key.
3. When the call is answered, press Conf and add the first call to the conference.
4. If you want to release the conference, press Split key.
3.10 Multiple-way call
If user has 2 line calls and wants to invite the three party during the call, they can
press Conf or Transf “New Call”, press OK, enter the number ,then press Send and
wait for the other party to answer. When the multiple-way calls, you can press the
arrow keys to select a call.

4 AdvancedFunction
4.1 Call pickup
Call pickup is implemented by simulating pickup function of PBX. it’s that, when
A calls B, B rings but no answer, at this moment, C can hook off and input an
appointed prefix plus B’s number, pick up A’s call and talk with A.
The following chart shows how to configure an appointed prefix in dial peer to
have call pick up function.
*1* means appointed prefix code. After making the above configuration, C can
dial *1* plus B’s phone number to pick up A’s call. User can set prefix in
random,in the case of no affecting current dialing rules.
4.2 Join call
When B is calling C, A can join in the existing call by inputting an appointed
prefix numbers plus B or C number, if B or C also supports join call.
The following chart shows how to configure an appointed prefix in dialpeer to
have join call function.
*2* means appointed prefix code. After making the above configuration, A can
dial *2* plusB or C number to join B and C’s call. User can set prefix in
random,in the case of no affecting current dialing rules.
4.3 Redial / Unredial
If B is in busy line when A calls B, A will get notice: busy, please hang up. If A
want to connect Bas soon as B is in idle, he can use redial function at the moment
andhe candials an appointed prefix number plus B’s number to realize redial
function.
What is redial function? A can’t not build a call with B when B is in busy, then A
will subscribe B’s calling mode at 60 second intervals. Once B is available, A will
get reminder of rings to hook off, while a hooks off, A will call B automatically. If
at this time A is occupied temporarily and unwilling to contact B, A also can
cancel the redial function by dialing an appointed prefix plus B’s number before
making the redial function.

*3* is appointed prefix code. After making the above configuration, A can dial
*3* plus B’s phone number to make the redial function.
*4* is appointed prefix code. After configuration, A can dial *4* to cancel redial
function.
User can set prefix in random,in the case of no affecting current dialing rules.
4.4 Click to dial
When user A browsesin an appointed Web page, user Acan click to call user B via
a link(this link to user B), then user A’s phone will ring, after A hooks off, the
phone will dial to B.
4.5 Call back
This function allows you dial out the last phone call you received.
4.6 Auto answer
When there is an incoming call, after no answer time, the phone will answer the
call automatically.
4.7 Hotline
You can set hotline number for every sip, and then enter the dialer interface and
after Warm Line Time, the phone will call out the hotline number automatically.
4.8 Application
SMS
1) Press Menu ->Applications->Enter->SMS->Enter.
2) Use the navigation keys to highlight the options. You can read the message in
the Inbox/Outbox.
3) After view the new message, you can press Reply to reply the message, and use
the 2aB softkey to change the Input Method, when enter the reply message, press
OK, then use the navigation keys to select the line from which you want to send,
then Send.

4) If you want to write a message, you can press New and enter message. Use the
2aB softkey to change the Input Method. When you input the message you want to
send, press OK, then use the navigation keys to select the line from which you
want to send, then Send.
5) If you want to delete the message, after view the message, press Del, then you
have three options to choose: Yes, All, No.
Memo
You can add some memos to record some important things to remind you.
Press Menu->Application->Memo->Enter->Add.
There are some options to configure: Mode, Date, Time, text, Ring. When the
configuration is completed, press Save.
Voice Mail
1) Press Menu->Application->Voice Mail->Enter.
2) Use the navigation keys to highlight the line for which you want to set, press
Edit, and use the navigation key to turn on the mode, and the input the number.
Press 2aB softkey to choose the proper input method.
3) Press Save to save the change.
4) To view the new voicemail, Press the Voicemail softkey directly. Press Dial,
then you may be prompted to enter the password, then you can listen to your new
and old messages.

Other Functions
4.9 Auto Handdown
1. Press Menu ->Features-> Enter->Auto Handdown-> Enter.
2. Set the Mode Enable through the navigation key, then set Time, unit is minute,
then press Save.
3. When the call ends, after the time that you have set, the phone will back to the
idle interface.
4.10 Ban Anonymous Call
1. Press Menu ->Features-> Enter->Ban Anonymous Call-> Enter.
2. Choose which sip you want to enable Ban Anonymous Call, and then press
Enter, choose Enabled or Disabled through navigation key.
3. If you choose Enabled, the others can’t call the phone by anonymous. If you
choose Disabled, the others can call the phone by anonymous.
4.11 Dial Plan
1. Press Menu ->Features-> Enter->Dial Plan-> Enter.
2. The following plans you can set: Press # to Send, Timeout to Send, Timeout,
Fixed Length Number, Press # to Do BXFER, BXFER On Onhook, AXFER On
Onhook. You can enable or disable each dial plan.
4.12 Dial Peer
1. Press Menu ->Features-> Enter->Dial Peer-> Enter.
2. Press Add to enter the Edit interface, and then input some information. For
example: Number: 1T, Dest.: 0.0.0.0, Port: 5060, Mode: SIP, Alisa: all:3333,
Suffix: no suffix, Del Len: 0. Then press Save. Then press Save.
3. Input 1+number (1234) in the dial interface, you can dial out 3333.
You can refer to 8.3.3.4 DIAL PEER.
4.13 Auto Redial
1. Press Menu ->Features-> Enter->Auto Redial-> Enter.
2. Choose Mode Enabled or Disabled through the navigation key. If you

chooseEnable, you also need to set Interval and Times, and then press Save.
3. After enable auto redial, calling out someone, if he is in busy, it will pop up a
prompt box whether to auto redial, press OK, the phone will call out him
according the Interval and Times that you set.
4.14 Call completion
1. Press Menu ->Features-> Enter->Call Completion-> Enter.
2. Enable the function through the navigation key, and then Save.
3. Call out others, if he is in busy, it will pop up a prompt Call Completion Waiting
number? Press OK, when he is in idle, it will pop up a prompt Call Completion
Call number? Press OK, the phone will call out the number automatically.
4.15 Power Light
1. Press Menu ->Features-> Enter->Power Light-> Enter.
2. Enable this function through the navigation key.
4.16 Hide DTMF
1. Press Menu ->Features-> Enter->Hide DTMF-> Enter.
2. Through the navigation key to choose: Disabled, All, Delay, Last Show. When
you set up a call with others and need to input the DTMF, the DTMF will show as
you have set.
4.17 Password Dial
1. Press Menu ->Features-> Enter->Password Dial-> Enter.
2. Enable this function, you can also set Prefix and Length. For example，you want
call out 1234567 and you set Password Dial Prefix 123 and Password Length 3,
then enter the dial interface and input 1234567, and then the screen will show
123***7.
4.18 Action URL & Active URI
1.Action URL: The action that the phone carries out e.g. open dnd can produces
one URL, then the phone can send the HTTP Get of the URL to PC, then the
phone can report the action to the PC.
2. Active URI: Enter the web page of the phone, PHONE->FEATURE, input
Active URL Limit IP, You can input internet server (e.g. PC'IP), PC can send one