Degelman PRO-TILL 10/13 User manual

B
A
Connect Hydraulics
Connect tractor to 3-point hitch.
DEPTH
1
142767 v1.0
QUICK-START GUIDE*
for PRO-TILL 10/13
* Refer to operators manual for complete safety and operation info.
T
O
B
E
E
L
I
G
I
B
L
E
F
O
R
Y
O
U
M
U
S
T
R
E
G
I
S
T
E
R
WARRANTY
REMEMBER! You must complete Product
Registration to be eligible for Warranty.
CLower Machine
DSet Cutting Depth
Start with 14 stops.
Test depth & adjust.
Depth Adjustment
(Depth Control on
Cylinder)
Typically
Set to 2”
1
IMPORTANT: Cycle oil in the Depth Control Cylinder before use.
This is especially important after long periods of storage.
1
1
(NOTE: Adjust pin locations to coincide with CAT size of tractor’s 3-point system.)
1

Scraper Position Overview (Rubber Roller)
Set Gap
distance at
1/4” to 3/8”
from roller surface.
Storage
Position
Maintenance
Position
Engaged
Position
Remove the 4 bolts to rotate into
or out of “Storage position”,
then re-install.
Loosen the 4 bolts to rotate up into
“Maintenance
Position”
& secure.
Loosen the 4
bolts to rotate
downward.
Set the scraper
clearance
(1/4” to 3/8”).
Properly tighten.
• Hydraulic Connections/Hoses
• Working points & pins
• Check for missing, worn or
damaged parts.
Maintenance
(Check Machine Daily)
GPS Reference
(Set overlap to 4” per side)
(with 20" discs) 2" Depth
Pro-Till 10 117” (9.98m)
Pro-Till 13 157” (3.99m)
(with 20” discs) MAX Depth
Pro-Till 10 119” (3.02m)
Pro-Till 13 159” (4.04m)
*Refer to operators manual for
complete safety and operation info.
ETest. Check. Adjust.
FRaise for Headland Turns.
1
100m100m
10-12 MPH
(Ideal Operating Speed)
(NOTE: Adjust top link of 3-point hitch to level unit at desired depth.)
© 2022 Degelman Industries LP