Digilock DL330BT User manual

DL330BT Bluetooth Lock User Instructions
Download the app, register with your mobile number (or e-mail address).
Input your nickname, account password and email address.
1) Android devices: Scan the QR code below or search for ‘TTlock’on the Google Play
Store.
2) Apple devices: Scan the QR code below or search for ‘TTlock’ on the Apple App Store.

Pair your device:
1) Install 4 x AA batteries and plug in the connector.
2) Push the reset button for 3-5 seconds, you will hear ‘Di Di’to confirm the lock is in
discovery mode.
Reset button is located under the battery housing (circled in red)
3) Immediately open your app, tap the menu icon in the top-left corner, then ‘add devices’,
‘lock’ and select your lock from the list. Your lock will only be selectable when it’s in
discovery mode.
4) When you find your lock in the TTlock app, it means the pairing is successful, if not, try
the above steps again.
Changing the Admin code:
1) Open the TTlock app.
2) Select the lock you wish to change the admin code for.
3) Tap the ‘gear’ symbol in the top-right hand corner of the screen.
4) Tap ‘Admin passcode’ and follow the prompts.
Sending e-Keys:
1) Open the TTlock app.
2) Select the lock you wish to authorise an eKey for.
3) Tap ‘eKey’. Choose period key or permanent key.
4) Input the person’s mobile number, leave a message, then tap ‘send’.

Sending passcodes:
1) Open the TTlock app.
2) Select the lock you wish to authorise a passcode for.
3) Tap ‘passcode’. Choose a validity period (one-time, minute(s), hour(s), day(s), month(s),
permanent).
4) Tap the ‘generate’ button to create a code.
5) Tap ‘Send Text Msg’ to send the code to the user.
Unlock
1) Open the TTlock app.
2) Touch the digital keyboard until the backlight is on.
3) Listen to the doorbell tone from your phone.
4) Turn the handle.
Lock
1) After a few seconds, the door will automatically lock.