Bubble blaster!
Bubble blaster!Bubble blaster!
Bubble blaster!
Fun motorized Bubble Machine that blows tons of bubbles. Simply
pour bubbles in the front of the machine, activate your capability
switch and the fun begins! The moving wands blow hundreds of
continuous bubbles. Great for developing visual tracking. Size: 5½"L x
6"W x 7½"H. Requires 4 AA Batteries. Weight: ½ lb.
Operation:
Operation:Operation:
Operation:
1. Fubbles Fun requires 4 AA batteries (Not included to operate.
Use alkaline batteries only (e.g. Duracell or Energizer brand . Do
not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2. The battery compartment is located under bubble blower’s base.
Carefully turn the bubble blower over to reveal the battery
compartment cover. Using a Phillips head screwdriver unscrew the
cover screw and install 4 AA batteries, paying close attention to
proper (+ and (- battery polarity.
3. Replace the battery compartment cover and secure with the
screw. Connect to any external capability switch (not included via
the jack located on the side of the bubble blower. Fubbles Fun is
equipped with a 1/8″ jack for use with external capability
switches with a 1/8″ plug. Make sure your switch is plugged in all
the way. There should be no gaps.
4. Fubbles Fun can be used with or without an external switch. The
ON/OFF switch is located in the top of the bubble blower. When
using an external capability switch, the ON/OFF switch needs to
be set in the OFF position. Actuate your external capability switch
and the bubbles will start to flow! Once you release your switch the
bubbles will stop.
5. When finished playing with Fubbles Fun turn the bubble blower
OFF to prevent battery drain.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: Fubbles Fun does not function correctly.
Action #1:
Action #1: Action #1:
Action #1: Check that all the batteries are installed, following proper
(+ & (- polarity. Also check that all batteries are fresh.
Action #2:
Action #2: Action #2:
Action #2: Replace the batteries paying close attention to proper (+
and (- battery polarity.
Action # 3:
Action # 3:Action # 3:
Action # 3: Make sure you have enough Bubble solution in the
dipping troth. The Bubble solution should cover the Bubble Dippers
completely.
Action #4
Action #4Action #4
Action #4:
::
: Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO gaps.
Action #5
Action #5Action #5
Action #5:
: :
: Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
If you will not be using Fubbles Fun for an extended amount of time,
we recommend removing the batteries.
Fubbles Fun can be wiped clean with any household multi-purpose
cleaner and disinfectant. We recommend Simple Green, which is a
non toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 4
44
4/
//
/12
1212
12/17
/17/17
/17
