Eterna D087 Setup guide

Ifyou experience problems:
If your lightisdefectiveor developsafault,pleasereturn ittothe placewhere you boughtit. You can call
our Helpline for advice.The Helpline willgladlygiveadviceon anyaspectofanyEterna Lighting product
but may notbe able togivespecific instructions regarding individual installations.
Ifindoubt,consultaqualified electrician.
Helpline:
Tel:[phone]Fax: [phone]Email: [e-mail]
For answers tofrequently asked questions (FAQs)and other information visit our web-site
www.eterna-lighting.co.uk
Lampreplacement:
>Switchoff the electricityatthe mains.
>Unscrew lamp.
>Screw in new lampand restore electricitysupply..
Replacementlamptype:
Wattage: 15W Maximum
Supply Voltage:250V
Size: E14
Cleaning:
>Clean this lightfitting onlywithasoftdry cloth
>Donot useanychemical or abrasivecleaners.
Eventually, you may wanttoreplace thislightfitting:
When your lightfitting comestothe end ofit’slifeor you choosetoupdateor upgrade it
byreplacing it,pleasedonotdisposeofitwithyournormal household waste,please
recycle where facilitiesexist. When you need todisposeofthisfitting,check withyour
retailer or local authority for suitable options. Newregulationswill encourage the
recycling ofWastefromElectricaland ElectronicEquipment(European “WEEE
Directive”effectiveAugust 2005 ).
PLEASE READ THESE INSTRUCTIONSBEFORE
INSTALLING YOUR NEWFITTING
--
PLEASE RETAINFORFUTUREREFERENCE
PygmyCabinetLight
with Auto-switch
Model(s)
D087,P1100 range
Pack contents:
Single pygmy cabinet light fitting 1
15 Watt pygmy lamp 1
Fixing pack 1

Safetymarkings:
Read thisfirst:
>Ifinanydoubt, consultaqualified electrician.
>Suitable for indoor useonly.
>Suitable for fixing on anormally flammable surface.
>Before making fixing hole(s),check thatthere are no obstructionshidden beneaththe mounting
surfacesuchas pipes or cables.
>If the location of your newfitting requiresthe provision ofanewelectrical supply, thesupplymust
conform withthe requirements ofthe latestedition ofthe IEE wiring regulations.
>Makeconnections tothe electricalsupply in accordancewiththe following code:
Live-Brownor Red
Neutral -Blue or Black
>Thisproduct isdesigned for permanentconnection tofixed wiring:thisshould be either asuitable
lighting circuit (protected witha5or 6AmpMCBor fuse)or afused spur (witha3Ampfuse)via
afused connection unit. Werecommend thatthe supplyincorporatesaswitchfor easeof
operation.
>This fitting is double insulated, do notconnect any parttoearth.
>Ensure that the minimumdistancefromthe lighttoanyflammable surfaceis atleast 40mm.
>Ifinanydoubt, consultaqualified electrician.
Installation:
1) Turn off the electricalsupplyand removetheappropriatecircuitfuse.
2) Choosethe locationofyour pygmylightsothat themovementofthe switchiswithinthe
rangesshowninthe diagramopposite.
3) Ensure thatthere isatleast 40mmbetween the fittingand anyoverhanging or
horizontalsurface.See diagramopposite.
4) Secure thefittinginplaceusingscrewsappropriatetothe mountingsurface.
5) Usingcableclipsfor 2x0.75mm²flattwinflex,secure the cabletothe mounting
surfacechoosingaroutewhichpreventsthecablefromfoulingthe movement of
whatever youhaveplanned toactuatethe switch.
6) Usingan Eterna ®Linklead (notsupplied ),makeyour connection tothemains
supply.See abovefor wiringcolour code.
7) Fitthe 15 Watt pygmylampsupplied.
8) Restore the power and switchon.
40mm
ON—1.5mm
OFF—5.0mm