Extreme Tools EX7215CH User manual

ASSEMBLY INSTRUCTIONS
TO REMOVE AND REPLACE DRAWERS
TO REMOVE DRAWERS:
• Pull drawer out so it’s almost fully extended
• Push UP right hand black release lever, at the same
time push DOWN left hand black release lever
• While holding the levers in the positions as
instructed from above, pull the drawer outward
until it is released from the drawer side.
PUSH UP (RIGHT HAND SIDE)
PUSH DOWN (LEFT HAND SIDE)
TO REPLACE DRAWERS
Extend the drawer slides from the tool cabinet.
Insert the brackets on each side of the
drawer into slots in the cabinet slides,
being careful that they are properly
positioned.
Once properly inserted, completely
close the drawer to set the slides in
their proper positions.
TO CLOSE THE LID
Pull the handle and easily close
the lid.
WARNING: Watch your hands
when closing lid
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
PROFESSIONAL STEEL CABINET MANUAL
EX7215CH TOP CHEST
Professional Tools and Equipment
EX7215CH TOP CHEST
CHEST

PARTS LIST
REF# DESCRIPTION PART# QTY
__________________________________________
1 Rubber Bumper 314003 3 pcs.
2 Detent 314064 36 pcs.
3 Gas Strut 303108 2 pcs.
4 Trim 315006 2 pcs.
5 Drawer 101791 8 pcs.
6 Slide(R) 300005R 18 pcs.
7 Drawer 101794 2 pcs.
8 Drawer Pull 301305 10 pcs.
9 Drawer Liner 362429 10 pcs.
10 Drawer Liner 362430 5 pcs.
11 Drawer Pull 301285 5 pcs.
12 Drawer 101795 1 pc.
13 Slide(L) 300005RL 18 pcs.
14 Drawer 101792 4 pcs.
15 Lock 304049 1 pc.
16 Lid Pull 301468 1 pc.
17 Till Liner 362813 1 pc.
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
EX7215CH TOP CHEST
PROFESSIONAL STEEL CABINET MANUAL
Professional Tools and Equipment
EX7215CH TOP CHEST
1. Replacement keys may be ordered, the code
which appears on the face of the lock is required.
2. Give the information for service parts: part number
and quantity.
The keys are taped to the
inside of the first drawer.