Extreme Tools EX7215CHBK User manual

R
Painted Steel Chest Manual
Extreme Tools Inc.
740 Frontenac Road
Naperville, IL 60563
630-369-9303
EX7215CHBK
EX7215CHBL
EX7215CHRD

2
Parts List
6
3
4
5
12
14
15
13
9
7
1
2
10
8
11
16
Ref # Description Part # Qty
x x x
The keys are taped
to the top storage
area of the chest.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 Rubber Bumper 314002 3
2 Detent 314059 36
3 Gas Strut 303081 2
4 Trim 315003 2
5 Drawer 229615 8
6 Slide Set 300012-300013 18
7 Drawer 229616 2
8 Drawer Pull 301073 10
9 Drawer Liner 550309 10
10 Drawer Liner 550310 5
11 Drawer Pull 301058 5
12 Drawer 229614 1
13 Drawer 229613 4
14 Lock and Key (K98) 304036 1
15 Lid Pull 301194 1
16 Till Liner 550724 1

3
Operation
Drawer Removal
Pull the drawer out so that it’s
almost fully extended. Push up on
the black release lever on one side,
while pulling down on the black
release lever on the other side.
While holding the levers in the
positions as instructed above,
pull the drawer outward until it is
released from the drawer slide.
Drawer Replacement
Extend the drawer slides. Insert
the brackets on each side of the
drawer into the slots in the slides,
being careful that they are properly
positioned. Once properly inserted,
completely close the drawer to set
the slides in their proper positions.
Closing the Lid
Remove hands before the cover
closes completely to prevent personal
injury.
Maintenance
Lubricate the slides twice a year with a product like WD40 or other
quality lubricant. This is especially necessary as the temperature
decreases, which can cause the bearing to become stiff.
Periodically clean the drawer fronts, drawer trim and other surfaces
with mild detergent and water.
Grease and oil can be removed with most standard cleaning uids.
For safety, use a nonammable cleaning uid.
Push up (one side)
Push down (other side)

4
Safety
WARNING
Do not attempt to lift the chest by its side handles using chains, ropes or lifting
devices, if two people cannot lift the chest. Use a forklift placed under the
bottom of the chest if this situation occurs. The side handle may fail, which may
cause personal injury or damage to the product.
Close the cover and lock the drawers before moving this product. The drawers
could come open and make the product unstable and tip, which may cause
personal injury or product damage.
DO NOT stand on this product or lean on the drawers.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip, which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This
may cause personal injury or product damage. Mounting this product to any
vehicle in any manner will void warranty.
DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
CAUTION
The maximum weight for each drawer should be no more than 250 lbs.
BE CAREFUL when closing the cover. Remove hands before the cover closes
completely to prevent personal injury.
When moving this product, do not pull it. Push the product to prevent personal
injury.
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause personal injury or product damage.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip
if stored or moved on an uneven surface, which may cause personal injury or
product damage.
IMPORTANT: Detents are intended to keep drawers closed when tool box
is stationary. Detents are not intended to keep drawers closed when
moving. DRAWERS MUST BE CLOSED and TOOL BOX MUST BE LOCKED
USING KEY BEFORE MOVING.
08/16