Extreme Tools PWS302000TXBK User manual

R
Painted Steel Portable Toolbox Manual
Extreme Tools Inc.
740 Frontenac Road
Naperville, IL 60563
630-369-9303
PWS302000TXBK

2
Parts List
1
2
3
4
5
6
7
8
9
10
11
12
Ref # Description Part # Qty
x x x
The keys are taped
to the top storage
area of the chest.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 Latch and Key (801–810) 304042 1
2 Rod 304014 2
3 Lock Nut 323000 2
4 Gas Spring 303033 1
5 Counter Sink Screw 320021 8
6 Side Handle 306039 2
7 M4 x 12 Screw 320084 4
8 Striker Kit Set 304015–304016 1
9 Power Strip 333019 1
10 Rubber Bumper 314011 2
11 Weather Stripping 314018 2
12 Weather Stripping 314013 1

3
Operation
Maintenance
Periodically clean the unit surfaces with mild detergent and water.
Auto wax can be used on painted (not aluminum) toolboxes to preserve the
unit’s luster nish and protect against scratches. Apply the wax as you would to
a car.
Grease and oil can be removed with most standard cleaning uids. For safety,
use a nonammable cleaning uid.
Safety
WARNING
DO NOT attempt to lift the unit by its side handles using chains, ropes or other
lifting devices. The side handle could fail, which may cause personal injury or
damage to the product.
DO NOT stand on the toolbox.
DO NOT alter this toolbox in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
Lock the lid before moving this product. The lid could come open and make the
product unstable, which may cause personal injury or product damage.
Be careful with sharp edges.
CAUTION
Keep the product on level surfaces. The product could become unstable and
tip if stored on an uneven surface, which may cause personal injury or product
damage.
Always wear ANSI approved safety goggles when working with tools and
equipment.
IMPORTANT: TOOL BOX MUST BE LOCKED USING KEY BEFORE MOVING.
08/16