Extreme Tools TXPIT7009 User manual

Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
TXPIT7009 70” PIT BOX
PROFESSIONAL STEEL CABINET MANUAL
Professional Tools and Equipment
TXPIT7009 70” PIT BOX
1. Replacement keys may be ordered, the code
which appears on the face of the lock is required.
2. Give the information for service parts: part number
and quantity.
1
ASSEMBLY INSTRUCTIONS
TO REMOVE DRAWERS
• Pull drawer out so it’s almost fully extended
• Push UP right hand black release lever, at the same
time push DOWN left hand black release lever
• While holding the levers in the positions as
instructed from above, pull the drawer outward
until it is released from the drawer side.
PUSH UP (RIGHT HAND SIDE)
PUSH DOWN (LEFT HAND SIDE)
TO REPLACE DRAWERS
Extend the drawer slides from the tool cabinet.
Insert the brackets on each side of the
drawer into slots in the cabinet slides,
being careful that they are properly
positioned.
Once properly inserted, completely
close the drawer to set the slides in
their proper positions.
RAISE & RELEASE DRAWER FRONTS
The Pit Box is equipped with raise and release
drawer fronts. To open, lift up on the drawer
front while pulling drawer towards you.
To close, shut the drawer firmly until the latch
engages. If the drawer does not stay closed
the hook may be bent, or it may rub against
the drawer slides. To fix this problem lightly
bend the hook until the drawer will engage in
the slide
MAINTENANCE
• Lubricate the slides (twice a year)
• Periodically the drawer fronts, drawer
trim and other surfaces should be cleaned
with mild detergent and water.
• Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
a nonflammable cleaning fluid.
• Periodically check tires for pressure levels.
FLAT REPAIR INSTRUCTIONS
• If air leakage occurs after use for a long
time, check tire, inflate as needed.
• If tire is pierced by a nail or other sharp
object, repair the tire as you would a
car tire. If the damage can not be
repaired, change tire.

TXPIT7009 70” PIT BOX
PROFESSIONAL STEEL CABINET MANUAL
Professional Tools and Equipment
TXPIT7009 70” PIT BOX
2
ASSEMBLY INSTRUCTIONS
REF# DESCRIPTION PART# QTY
__________________________________________
1 Lock 304003 1 pc.
2 Shelf 218860 2 pcs.
3 Shelf Support 203902 8 pcs.
4 M4x5 Philips Head Bolt 320060 4 pcs.
5 Trim(L) 315044 1 pc.
6 Trim 315047 2 pcs.
7 Trim 315049 7 pcs.
8 Drawer Pull 301283 7 pcs.
9 Drawer Liner 550805 7 pcs.
10 Shelf Liner 550843 4 pcs.
11 Slide(L) 300176 10 pcs.
12 Trim(R) 315045 1 pc.
13 Slide(R) 300177 10 pcs.
14 Door Pull 301320 2 pcs.
15 M10 Cap Nut 323050 16 pcs.
16 Tire(Tubeless)* 319026 4 pcs.
(*tire pressure: max inflation 24 PSI)
17 Ring Bolt 322106 4 pcs.
18 Washer 324054 4 pcs.
19 Spring Washer 324053 4 pcs.
20 M10x30 Hex Bolt 321046 4 pcs.
21 Positioning Rubber 314150 3 pcs.
22 The Control Handle 108388 1 pc.
23 Handle Sleeve 314149 2 pcs.
24 Brake Mechanism 317010 1 set
25 Trim 315046 2 pcs.
26 Work Top 109460 1 pc.
27 Drawer 109461 4 pcs.
28 Drawer 109462 2 pcs.
29 Drawer 109463 1 pc.
30 Caliper 317010-C 1 pc.
30 Rotor 317010-F 1 pc.
The keys are taped to the
inside of the first drawer.

TXPIT7009 70” PIT BOX
Professional Tools and Equipment
3
HOOK
BOLT
CONTROL HANDLE
CONTROL HANDLE ATTACHMENT
Note: Control handle will be affixed in the head
with four provided M10x12 Hex Bolts
BRAKE LOCK
The bolt stick downward against the outside of the handle,
the hook catch the bolt, so the handle is unable to move.
With the brake on, the cart is locked.
BRAKE UNLOCK
The bolt stick upward, the hook is off the bolt,
so the handle is able to move. With the brake off,
the cart can be moved.