Extreme Tools RX412508CH User manual

41 inch Powder Coated Steel
Top Chest
© 2020
Model:
RX412508CH
Extreme Tools, Inc.
740 Frontenac Rd.
Naperville, Illinois 60563
6330.369.9303
www. ExtremeTools.net

Replacement keys may be ordered using the code that appears
on the face of the lock.
To order replacement parts, have the part number, tool box
color and quantity ready. If under warranty, the serial number is
REQUIRED to get replacement parts.
Not all parts are available under warranty and may be
purchased separately.
TOP CHEST PARTS LIST
RX412508CH

Item Part number
Descrip�ons Qty
2 ZST350110M6
Strut for lid support on the RX412508CH,
DX412504CH (11KG).
2
3 ZDRR324E1QWKC
RX41 drawer #2, 25" deep, 100# slide, Black
w/Chrome drawer pull
2
3 ZDRR324E1QWUC
RX41 drawer #2, 25" deep, 100# slide, Blue
w/Chrome drawer pull
2
4 ZDRR324E3QWKC
RX41 drawer #3, 25" deep, 100# slide, Black
w/Chrome drawer pull
1
4 ZDRR324E3QWUC
RX41 drawer #3, 25" deep, 100# slide, Blue
w/Chrome drawer pull
1
5 ZDRR594E1QWKC
RX41 drawer #5, 25" deep, 100# slide, Black
w/Chrome drawer pull
5
5 ZDRR594E1QWUC
RX41 drawer #5, 25" deep, 100# slide, Blue
w/Chrome drawer pull
5
6 Z-LK EX01-04
EX01-EX04 Mix lock sets 1
7 ZTRRX564-CR
RX41 chest vercal trim, 564mm, AL, Le=Right,
Chrome
2
8 ZSLW530F520
100 lb. Drawer Slide set 9 sets
9 ZDL924X559 PVC
Drawer liner, large, 924x559, PVC, Black 1
10 ZDL567X559 PVC
Drawer liner, med, 567x559, PVC, Black 5
11 ZDL297X559 PVC
Drawer liner, small, 297x559, PVC, Black 3
Z-DL412508CH-Kit
Liner kit, 1 large, 5 midium & 3 small (For re-order
purpose)
1 set
12 ZDPRX960-CR
RX41 Chest lid pull, 960 mm, Chrome for RX41
1
12 ZDPQRX594-CR
RX drawer pull assy, 594 mm, Chrome, DDT for
RX41
5
13 ZDPQRX324-CR
RX drawer pull assy, 324 mm, Chrome, DDT for
RX41
3
Z-LGS
Extreme Tools name plate 1
Z-ECRX
RX Plasc End Cap 2
ZM8BTHX-16
M8X16 Hex Bolts for securing chest to cabinet 2
ZM4MSPH-6
M4 X 6 MM Pan Head Mach. Screw for lid pull 7
Z-DTEX56
Detents for slides (come with slides) 18
RX412508CH
TOP CHEST PARTS LIST

Securing Top Chest and Roller Cabinet
Place the chest on the cabinet. Open the top drawer and locate the two holes under
the top surface of the roller cabinet.
Place one at washer on each of (2) M8 x 16mm hex bolts. (Included with Top Chest)
Insert hex bolt with washer up through the hole of the roller cabinet and into the hole
on the bottom side of the top chest. Tighten securely.
ASSEMBLY

Drawer Removal
Pull drawer out so that it is almost
fully extended.
Push up on the black lever on one
drawer slide and at the same time
push down on the lever on the
other side.
With the levers in these positions,
pull the drawer out until it releases
from the drawer slides.
Drawer Replacement
Extend the drawer slides.
Careful align the brackets on
the sides of the drawers with the
slots of the cabinet slides. Insert
the brackets on the side of each
drawer into the slots of the cabinet
slides.
Once properly inserted,
completely close the drawer to
set the slides into their properly
functioning positions.
MAINTENANCE
Lubricate the casters once a year with high quality ball bearing grease.
Lubricate the slides twice a year with high quality, petroleum-based
lubricant. This may be required more often If operating the tool box in colder
climates.
Use mild detergent and water to clean drawer fronts, drawer trim and other
surfaces.
Grease and oil can be removed with standard, non-abrasive, non-
ammable cleaning products.
Auto wax will help preserve the unit’s high gloss nish. Follow directions as
provided.
OPERATING PROCEDURE

SAFETY
Do not attempt to lift the cabinet by its side handle using chains, ropes or lifting device.
Side handle may fail resulting in personal injury or damage to the product!
Use a forklift or similar lifting device with forks placed under the bottom of the tool box to
move if tool box cannot be moved by two people.
Close the drawers and lock the tool box before moving this product! If drawers are not
locked they could open and make the product unstable and tip which may cause personal
injury or damage to the product.
Do NOT stand on this product or lean on the drawer or work top.
Wear safety glasses when removing or repositioning the slides. The tool box could slip
resulting in personal injury.
Do NOT mount this product on a truck bed or other moving object. This may cause
personal injury or product damage. Mounting this product on any surface will void the
warranty.
Do NOT tow with power equipment. The product could tip which may cause personal
injury or product damage.
Do NOT alter this product in any manner or attach electrical equipment. This may cause
personal injury or product damage and will void the warranty.
If using the combination top chest and roller cabinet, the top chest MUST be secured to
the roller cabinet by following the directions provided. Not securing the top chest to the
roller cabinet may cause the product to become unstable which may cause personal injury
or damage to the product.
DRAWERS MUST BE CLOSED AND TOOL BOX LOCKED USING KEYS
BEFORE MOVING!
The maximum weight for each drawer should not exceed 100 lbs. (45 kg) for single slides
and 200 lbs. (90 kg) for drawers with double slides.
Use caution when closing the chest lid. Remove hands from the area before closing to
prevent personal injury.
Do NOT pull this product. Push the product to prevent personal injury.
ENGAGE THE BRAKES when not moving this product. Locked casters prevent the
product from rolling which may result in personal injury or damage to the product.
This product may become unstable and tip if more than one drawer is open at a time. To
prevent personal injury or damage to product, OPEN ONLY ONE DRAWER AT A TIME.
Lock product and properly secure before moving with a forklift or other device.
Keep the product on a level surface. The product could become unstable and tip if stored
or moved on an uneven surface which may result in personal injury or product damage.
Remove the work surface from the roller cabinet before installing top chest.
WARNING
CAUTION - IMPORTANT PRODUCT INFORMATION