Extreme Tools PWS4105TX User manual

Model Number:
PWS4105TX
Component from Combo Number:
PWSRC4129TX

2
Parts List
Ref # Description Part # Qty
x x x
The keys are taped
to the top storage
area of the chest.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 Latch and Key (801–810) 304042 1
2 Weather Stripping 314141 2
3 Lock Nut 323000 4
4 Gas Spring 303034 2
5 Slide Set 300048–300049 1
6 Striker Kit Set 304015–304016 1
7 Tray 107029 1
8 Drawer 107015 1
9 Drawer Liner 551212 1
10 Drawer Liner 551239 1
11 Slide Set 300002–300003 1
12 M6 x 10 Counter Sink Screw 320209 15
13 Drawer Liner 551240 1
14 Drawer Liner 551213 1
15 Drawer 107017 1
16 Slide Set 300146–300147 2
17 Drawer Liner 551214 1
18 Drawer Pull 306109 2
19 Drawer 107027 1
20 Power Strip 333019 2
21 Side Handle 306039 2
22 M6 x 19 Counter Sink Screw 320021 8
23 Grommet 314027 2
24 Rod 304069 2
25 Weather Stripping 314131 1
26 Cotter Pin 326003 3
26
1
25
24
2
3
4
7
8
15
19
17
16
21
11
20
5
6
22
9
14
13
10
18
12
23

3
Operation
Maintenance
Periodically clean the unit surfaces with mild detergent and water.
Auto wax can be used on painted toolboxes to preserve the unit’s luster nish
and protect against scratches. Apply the wax as you would to a car.
Grease and oil can be removed with most standard cleaning uids. For safety,
use a nonammable cleaning uid.
Safety
WARNING
DO NOT attempt to lift the unit by its side handles using chains, ropes or other
lifting devices. The side handle could fail, which may cause personal injury or
damage to the product.
DO NOT stand on the toolbox.
DO NOT alter this toolbox in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
Lock the lid before moving this product. The lid could come open and make the
product unstable, which may cause personal injury or product damage.
Be careful with sharp edges.
CAUTION
Keep the product on level surfaces. The product could become unstable and
tip if stored on an uneven surface, which may cause personal injury or product
damage.
Always wear ANSI approved safety goggles when working with tools and
equipment.
IMPORTANT: TOOL BOX MUST BE LOCKED USING KEY BEFORE MOVING.
08/16