Extreme Tools EX7218RCBK User manual

R
Painted Steel Cabinet Manual
Extreme Tools Inc.
740 Frontenac Road
Naperville, IL 60563
630-369-9303
EX7218RCBK
EX7218RCBL

2
Parts List
Ref # Description Part # Qty
x x x
The keys are taped
inside the top drawer.
Replacement keys may
be ordered using the code
that appears on the face
of the lock.
To order replacement parts,
have the part number and
quantity ready.
Not all parts are available
under warranty. Those
parts not available may
be purchased.
1 M6 x 12 Hex Bolt 321051 8
2 Cabinet Handle 306059 2
3 Drawer 114809 4
4 Drawer 114808 3
5 Drawer Pull 301051 7
6 Swivel Caster 302002 4
7 Washer 324000 24
8 M8 x 25 Hex Bolt 321047 24
9 Trim (right) 315043 1
10 Drawer Liner 550343 7
11 Drawer Pull 301052 6
12 Drawer 114807 3
13 Drawer 114806 3
14 Rigid Caster 302003 2
15 Drawer Liner 550344 6
16 Drawer Liner 550342 4
17 Drawer 114805 1
18 Drawer Pull 301049 4
19 Slide Set 300012–300013 19
20 Trim (left) 315042 1
21 Drawer 114804 2
22 Drawer 114803 1
23 Drawer 114810 1
24 Lock and Key (1201–1204) 304007 1
25 Detent 314059 38
26 Drawer Liner 550345 1
27 Drawer Pull 301055 1
28 Stainless Steel Work Top 101718 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27 28

3
Assembly
Handle Installation
NOTE: Assemble the handle rst
to make it easier to move the tool
cabinet.
Simply position the handle over the
holes in the cabinet and attach with
the provided M6 x 12 hex bolts.
Tighten securely.
Repeat for the other cabinet handle
on the other side of the cabinet.
Operation
Drawer Removal
Pull the drawer out so that it’s
almost fully extended. Push up on
the black release lever on one side,
while pulling down on the black
release lever on the other side.
While holding the levers in the
positions as instructed above,
pull the drawer outward until it is
released from the drawer slide.
Drawer Replacement
Extend the drawer slides. Insert
the brackets on each side of the
drawer into the slots in the slides,
being careful that they are properly
positioned. Once properly inserted,
completely close the drawer to set
the slides in their proper positions.
Push up (one side)
Push down (other side)
Maintenance
Lubricate the casters once a year with high quality bearing grease.
Lubricate the slides twice a year with a product like WD40 or other quality
lubricant. This is especially necessary as the temperature decreases, which can
cause the bearing to become stiff.
Periodically clean the drawer fronts, drawer trim and other surfaces with mild
detergent and water.
Grease and oil can be removed with most standard cleaning uids. For safety,
use a nonammable cleaning uid.

4
Safety
WARNING
Do not attempt to lift the unit by its side handles using chains, ropes or lifting
devices, if two people cannot lift the unit. Use a forklift placed under the bottom
of the unit if this situation occurs. The side handle may fail, which may cause
personal injury or damage to the product.
Lock the drawers before moving this product. The drawers could come open
and make the product unstable and tip, which may cause personal injury or
product damage.
DO NOT stand on this product or lean on the drawers or work top.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip, which may cause personal injury.
DO NOT mount this product on a truck bed or any other moving object. This
may cause personal injury or product damage. Mounting this product to any
vehicle in any manner will void warranty.
DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
CAUTION
The maximum weight for each drawer should be no more than 250 lbs.
When moving this product, do not pull it. Push the product to prevent personal
injury.
USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer. The product could become
unstable and tip, which may cause personal injury or product damage.
Secure this product properly before moving it with a forklift.
Keep the product on level surfaces. The product could become unstable and tip
if stored or moved on an uneven surface, which may cause personal injury or
product damage.
IMPORTANT: Detents are intended to keep drawers closed when tool box is
stationary. Detents are not intended to keep drawers closed when moving.
DRAWERS MUST BE CLOSED and TOOL BOX MUST BE LOCKED USING
KEY BEFORE MOVING.
08/16