Extreme Tools RX722519RC-X User manual

Extreme Tools, Inc.
740 Frontenac Road
Naperville, Illinois 60563
630.369.9303
www.ExtremeTools.com
72 in. W x 25 in. D
19 Drawer Powder-Coated Steel
Roller Cabinet
© 2022
Model:
RX722519RC - X
150 lbs. Slides
For All Customer Service inquiries please contact:
[email protected]
Include in email:
a. Name
b. Ship To Address
c. Model Number
d. Serial Number
e. Phone Number
f. Reason for inquiry

Roller Cabinet Parts List
RX722519RC - X
150 lbs. Slides
Replacement keys may be ordered using the code that appears on the face
of the lock.
To order replacement parts, have the part number, tool box color and quantity
ready.
If under warranty, the serial number is REQUIRED to get replacement parts.
Not all parts are available under warranty and may be purchased separately.
31
4
25
23
24
1
3
5
6
7
8
9
12
13 14
15
16
18
20
19
27
28
21
2

PARTS LIST - RX722519RC - X
Item # Part number Descrip�ons Qty.
1 Z-LK EX01-04 EX01-EX04 Mix lock sets 1
2 ZDRR398E1QXKR RX drawer #3, 25" deep, 150# slide, Black w/Red drawer pull 8
2 ZDRR398E1QXKU RX drawer #3, 25" deep, 150# slide, Black w/Blue drawer pull 8
2 ZDRR398E1QXGK RX drawer #3, 25" deep, 150# slide, Green w/Black drawer pull 8
2 ZDRR398E1QXOK RX drawer #3, 25" deep, 150# slide, Orange w/Black drawer pull 8
2 ZDRR398E1QXUK RX drawer #3, 25" deep, 150# slide, Blue w/Black drawer pull 8
3 ZDRR398E4QXKR RX drawer #4, 25" deep, 150# slide, Black w/Red drawer pull 2
3 ZDRR398E4QXKU RX drawer #4, 25" deep, 150# slide, Black w/Blue drawer pull 2
3 ZDRR398E4QXGK RX drawer #4, 25" deep, 150# slide, Green w/Black drawer pull 2
3 ZDRR398E4QXOK RX drawer #4, 25" deep, 150# slide, Orange w/Black drawer pull 2
3 ZDRR398E4QXUK RX drawer #4, 25" deep, 150# slide, Blue w/Black drawer pull 2
4 ZDRR1305E2QXKR RX drawer #1, 25" deep, 150# slide, Black w/Red drawer pull 1
4 ZDRR1305E2QXKU RX drawer #1, 25" deep, 150# slide, Black w/Blue drawer pull 1
4 ZDRR1305E2QXGK RX drawer #1, 25" deep, 150# slide, Green w/Black drawer pull 1
4 ZDRR1305E2QXOK RX drawer #1, 25" deep, 150# slide, Orange w/Black drawer pull 1
4 ZDRR1305E2QXUK RX drawer #1, 25" deep, 150# slide, Blue w/Black drawer pull 1
5 ZDRR1305E1QXKR RX drawer #2, 25" deep, 150# slide, Black w/Red drawer pull 2
5 ZDRR1305E1QXKU RX drawer #2, 25" deep, 150# slide, Black w/Blue drawer pull 2
5 ZDRR1305E1QXGK RX drawer #2, 25" deep, 150# slide, Green w/Black drawer pull 2
5 ZDRR1305E1QXOK RX drawer #2, 25" deep, 150# slide, Orange w/Black drawer pull 2
5 ZDRR1305E1QXUK RX drawer #2, 25" deep, 150# slide, Blue w/Black drawer pull 2
6 ZDRR865E1QXKR RX drawer #5, 25" deep, 150# slide, Black w/Red drawer pull 3
6 ZDRR865E1QXKU RX drawer #5, 25" deep, 150# slide, Black w/Blue drawer pull 3
6 ZDRR865E1QXGK RX drawer #5, 25" deep, 150# slide, Green w/Black drawer pull 3
6 ZDRR865E1QXOK RX drawer #5, 25" deep, 150# slide, Orange w/Black drawer pull 3
6 ZDRR865E1QXUK RX drawer #5, 25" deep, 150# slide, Blue w/Black drawer pull 3
7 ZDRR865E2QXKR RX drawer #6, 25" deep, 150# slide, Black w/Red drawer pull 2
7 ZDRR865E2QXKU RX drawer #6, 25" deep, 150# slide, Black w/Blue drawer pull 2
7 ZDRR865E2QXGK RX drawer #6, 25" deep, 150# slide, Green w/Black drawer pull 1
7 ZDRR865E2QXOK RX drawer #6, 25" deep, 150# slide, Orange w/Black drawer pull 1
7 ZDRR865E2QXUK RX drawer #6, 25" deep, 150# slide, Blue w/Black drawer pull 2
8 ZDRR398E2QXKR RX drawer #7, 25" deep, 150# slide, Black w/Red drawer pull 1
8 ZDRR398E2QXKU RX drawer #7, 25" deep, 150# slide, Black w/Blue drawer pull 1
8 ZDRR398E2QXGK RX drawer #7, 25" deep, 150# slide, Green w/Black drawer pull 1
8 ZDRR398E2QXOK RX drawer #7, 25" deep, 150# slide, Orange w/Black drawer pull 1
8 ZDRR398E2QXUK RX drawer #7, 25" deep, 150# slide, Blue w/Black drawer pull 1
9 Z-ECRX RX Plasc End Cap 2
12 ZHDRX25-RD RX side handle, for 25" deep unit, 19" space, Red 1
12 ZHDRX25-BU RX side handle, for 25" deep unit, 19" space, Blue 1
12 ZHDRX25-BK RX side handle, for 25" deep unit, 19" space, Black 1
13 Z-LGL Extreme Tools Logo 1
14 Z-LGS Extreme Tools name plate 1
15 ZTRRX979-RD RX/GW 72/55 cabinet vercal trim, 979mm, AL, Le=right, Red 2
15 ZTRRX979-BU RX/GW 72/55 cabinet vercal trim, 979mm, AL, Le=right, Blue 2
15 ZTRRX979-BK RX/GW 72/55 cabinet vercal trim, 979mm, AL, Le=right, Black 2

Item # Part number Descrip�ons Qty.
16 ZMDF1815X600X15 Laminated MDF top for RX7225RC, 15 mm, black 1
16 ZSST1815X600X25 SS 304 top for RX7225RC, 25 mm, 1 mm material (Upgrade Op�on) 1
18 ZDPRX1305-RD RX drawer pull assy for drawer #1 & 2, 1305 mm long, Red 3
18 ZDPRX1305-BU RX drawer pull assy for drawer #1 & 2, 1305 mm long, Blue 3
18 ZDPRX1305-BK RX drawer pull assy for drawer #1 & 2, 1305 mm long, Black 3
19 ZDPRX864-RD RX drawer pull assy for drawer #5 & 6, 864 mm long, Red 5
19 ZDPRX864-BU RX drawer pull assy for drawer #5 & 6, 864 mm long, Blue 5
19 ZDPRX864-BK RX drawer pull assy for drawer #5 & 6, 864 mm long, Black 5
20 ZDPRX395-RD RX drawer pull assy for drawer #3,4 & 7, 395 mm long, Red 11
20 ZDPRX395-BU RX drawer pull assy for drawer #3,4 & 7, 395 mm long, Blue 11
20 ZDPRX395-BK RX drawer pull assy for drawer #3,4 & 7, 395 mm long, Black 11
21 ZM6SCHX-15 RX series drawer handle screws. 4
23 ZDL375X559 PVC Drawer liner, small, 375x559, PVC, Black 11
24 ZDL839X559 PVC Drawer liner, med, 839x559, PVC, Black 5
25 ZDL1278X559 PVC Drawer liner, large, 1278x559, PVC, Black 3
27 Z-CA6R(CRS) 6X2 MAG wheel swivel with brake, NO LOGO 4
28 Z-BTM10X25SHH M10X25 Serrated Hex Head Bolt 24
31 ZSLX530F520 150 lb. Drawer Slide set 25 sets
not shown Z-CA6R(CR) 6X2 Chrome Mag Caster (Rigid) 2
not shown Z-DTEX56 Detents for slides (come with slides) 50
replacement
set
Z-DLRX722519RC-Kit Liner kit: 3 large, 5 medium & 11 small (For re-order purpose) 1 set
PARTS LIST - RX722519RC - X (continued)

Handle Installation
NOTE: Assemble the handle rst to make it easier to move the tool cabinet.
Position the handle over the holes in the cabinet and attach with the provided (4) M6-1.0 x 15 SH screws.
Tighten securely.
ASSEMBLY
Drawer Removal
Pull drawer out so that it is almost fully extended.
Push up on the black lever on one drawer slide and at the
same time push down on the lever on the other side.
With the levers in these positions, pull the drawer out until
it releases from the drawer slides.
Drawer Replacement
Extend the drawer slides.
Carefully align the brackets on the sides of the drawers
with the slots of the cabinet slides. Insert the brackets on
the side of each drawer into the slots of the cabinet slides.
Once properly inserted, completely close the drawer to set
the slides into their properly functioning positions.
Lubricate the casters once a year with high quality ball bearing grease.
Lubricate the slides twice a year with high quality, petroleum-based lubricant. This may be required more often if
operating the tool box in colder climates.
Use mild detergent and water to clean drawer fronts, drawer trim and other surfaces.
Grease and oil can be removed with standard, non-abrasive, non-ammable cleaning products.
Auto wax will help preserve the unit’s high gloss nish. Follow directions as provided.
OPERATING PROCEDURE
MAINTENANCE

SAFETY
Do not attempt to lift the cabinet by its side handle using chains, ropes or lifting device.
Side handle may fail resulting in personal injury or damage to the product!
Use a forklift or similar lifting device with forks placed under the bottom of the tool box to move if tool box cannot be moved by two people.
Close the drawers and lock the tool box before moving this product!
If drawers are not locked they could open and make the product unstable and tip which may cause personal injury or damage to the
product.
Do NOT stand on this product or lean on the drawer or work top.
Wear safety glasses when removing or repositioning the slides. The tool box could slip resulting in personal injury.
Do NOT mount this product on a truck bed or other moving object. This may cause personal injury or product damage. Mounting this
product on any surface will void the warranty.
Do NOT tow with power equipment. The product could tip which may cause personal injury or product damage.
Do NOT alter this product in any manner or attach electrical equipment. This may cause personal injury or product damage and will void
the warranty.
If using the combination top chest and roller cabinet, the top chest MUST be secured to the roller cabinet by following the directions
provided. Not securing the top chest to the roller cabinet may cause the product to become unstable which may cause personal injury or
damage to the product.
ENGAGE THE BRAKES when not moving this product.
DRAWERS MUST BE CLOSED AND TOOL BOX LOCKED USING KEYS BEFORE MOVING!
The maximum weight for each drawer should not exceed 150 lbs.(68 kg) for single slides and 300 lbs.(136 kg) for drawers with double
slides.
Maximum overall weight should not exceed 3,600 lbs. (1,632 kg.)
Use caution when closing the chest lid. Remove hands from the area before closing to prevent personal injury.
Do NOT pull this product. Push the product to prevent personal injury.
ENGAGE THE BRAKES when not moving this product. Locked casters prevent the product from rolling which may result in personal
injury or damage to the product.
This product may become unstable and tip if more than one drawer is open at a time. To prevent personal injury or damage to product,
OPEN ONLY ONE DRAWER AT A TIME.
Lock product and properly secure before moving with a forklift or other device.
Keep the product on a level surface. The product could become unstable and tip if stored or moved on an uneven surface which may
result in personal injury or product damage.
Remove the work surface from the roller cabinet before installing top chest.
WARNING
CAUTION - IMPORTANT PRODUCT INFORMATION