FabiaTech PC104 User manual

FabiaTech Corporation
IPC Solution
Website: http://www.fabiatech.com
Email: [e-mail]
PC104 CPU Card
Low Power Series
FB2410 User’s Manual
APR 2008
Version: 1.2
Part Number: FB2410
i

Copyright
Copyright © 2007 FabiaTech Corporation, The content of this publication may not
be reproduced in any part or as a whole, transcribed, stored in a retrieval system,
translated into any language, or transcribed in any form or by any means,
electronic, mechanical, and magnetic… or otherwise without the prior written
permission of FabiaTech Corporation.
Disclaimer
FabiaTech makes no representation of warranties with respect to the contents of
this publication. In an effort to continuously improve the product and add features,
FabiaTech reserves the right to revise the publication or change specifications
contained in it from time to time without prior notice of any kind from time to time.
FabiaTech shall not be reliable for technical or editorial errors or omissions, which
may occur in this document. FabiaTech shall not be reliable for any indirect,
special, incidental or consequential damages resulting from the furnishing,
performance, or use of this document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are
used for identification purpose only and are the properties of their respective
owners.
Technical Support
If you have problems or difficulties in using the system or setting up the relevant
devices, and software that are not explained in this manual, please contact our
service engineer for service, or send email to sup[email protected].
Returning Your Board for Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your
product by following these guidelines:
A list of your name, address, telephone, facsimile number, or email address
where you may be reached during the day
Description of you peripheral attachments
Description of your software (operating system, version, application
software, etc.) and BIOS configuration
Description of the symptoms (Extract wording any message)
For updated BIOS, drivers, manuals, or product information, please visit us at
www.fabiatech.com
ii

Table of Contents
PC104 CPU Card.......................................................................................................................i
Low Power Series....................................................................................................................i
FB2410 User’s Manual ...........................................................................................................i
Chapter 1 Introducing the FB2410 System................................................................................ 1
Overview..................................................................................................................................1
Series Comparison Table.......................................................................................................2
Layout.......................................................................................................................................3
Specifications..........................................................................................................................4
Packing List..............................................................................................................................5
Chapter 2 Hardware Installation ............................................................................................... 7
Before Installation...................................................................................................................7
Hardware Features.................................................................................................................8
J7: Power Connector (4-pin 2.5mm JST)..........................................................9
J3: Reset Header.................................................................................................9
J1: RJ45 LAN /Adapter Connector with LED indicators..............................10
CN1: Keyboard/Mouse Connector ...............................................................11
J5: External Speaker Header...........................................................................11
J2: USB Connector............................................................................................12
LED1: Power/WatchDog LED indicator, J4: External HDD LED Header ....12
J8 & JP3: External Battery Connector and Battery Select Jumper...........13
CN5: IDE hard Disk Connectors ......................................................................14
CN6: Floppy Connector...................................................................................15
CN4: 26-pin Parallel Port Connector..............................................................16
CN2 & CN3: Serial Port Connectors RS-232C Pin Definitions......................17
DIMM1: So-DIMM Socket..................................................................................18
CF1 & JP1: Compact Flash Socket and Master/Slave Select....................18
BUS1: PC/104 Bus Connectors.........................................................................19
Chapter 3 Installing CRT & LCD Display .................................................................................. 21
LCD FLAT PANEL DISPLAY.....................................................................................................21
CRT Display (CN8).................................................................................................................22
CN7, CN9 & CN10: LCD Connector and Power connector......................23
iii

Chapter 4 BIOS Setup............................................................................................................... 25
Overview................................................................................................................................25
BIOS Functions ............................................................................................................26
Keyboard Convention ..............................................................................................27
STANDARD CMOS SETUP......................................................................................................28
ADVANCED CMOS SETUP....................................................................................................30
ADVANCED CHIPSET SETUP.................................................................................................35
POWER MANAGEMENT........................................................................................................38
PCI/PLUG AND PLAY ............................................................................................................40
PERIPHERAL SETUP.................................................................................................................42
Password Setup.....................................................................................................................44
Chapter 5 Driver and Utility...................................................................................................... 45
LAN Utility & Driver................................................................................................................45
BIOS Flash Utility.....................................................................................................................45
Watchdog Timer...................................................................................................................46
Watchdog Timer Setting...........................................................................................47
Watchdog Timer Enabled ........................................................................................48
Watchdog Timer Trigger ...........................................................................................48
Watchdog Timer Disabled........................................................................................49
Chapter 6 Technical Reference .............................................................................................. 51
Trouble Shooting for Post Beep and Error Messages.......................................................51
POST BEEP...........................................................................................................51
Error Message....................................................................................................51
Technical Reference............................................................................................................54
Physical and Environmental............................................................................54
Real-Time Clock and Non-Volatile RAM .......................................................54
CMOS RAM Map...............................................................................................56
I/O Port Address Map.......................................................................................57
Interrupt Request Lines (IRQ)...........................................................................58
Serial Ports..........................................................................................................59
Appendix................................................................................................................................... 63
Dimension..............................................................................................................................63
iv

v

FabiaTech Corporation
Chapter1IntroducingtheFB2410System
Overview
The FB2410 is an ST STPC ATLAS processor, all in one, PC/104 CPU board. This user’s
manual provides information on the physical features, installation, and BIOS setup
of the FB2410.
Built to unleash the total potential of the STPC ATLAS Processor, the FB2410 is a
single board computer capable of handling today’s demanding requirements.
Able to support 133MHz CPU, this unit supports 10/100M interface network port, 1
DIMM socket supports up to 128 SDRAM, two USB1.1 ports, and a VGA controller.
Each FB2410 has two ports for I/O communications. Two RS-232 ports are available.
There is also a watchdog timer that can be configured from software to
automatically reset the system. And for easy configuration, AMI BIOS are available.
Power management is also featured to lower the rate of consumption. The unit
supports doze mode, <Suspend Mode> and <Standby mode> as well as it adheres
to the “Green Function” standard.
The FB2410 is perfect for POS and POI applications, network systems, panel / MMI’s,
order entry kiosks, test equipment, OEM projects or as a motherboard for a panel
PC. The unit is only 90.2x95.9mm, offering unparalleled performance in a very small
footprint.
1

FabiaTech Corporation
SeriesComparisonTable
Model FB2410 FB2410A
Processor
VGA Chipset STPC ATLAS
CRT / LCD CRT/TFT/LVDS CRT
Watchdog Timer Yes
Multi I/O 2S/1P/FDD/IDE
Serial Port One RS232,One RS-232/RS485
Parallel Yes
FDD Yes
Enhanced IDE One
Compact Flash Socket One
USB 1.1 Two
RJ45 port (10/100Mbps) One
Dimensions (Unit: mm) 90.2(D) x 95.9(W)
2

FabiaTech Corporation
Layout
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1
CF1
DIMM1
3

FabiaTech Corporation
Specifications
STPC ATLAS CPU and 8KB L1 cache inside the CPUs.
Supporting One So-DIMM socket for up 128MB SDRAM
One 10M/100M Base-TX Ethernet port.
Supports CRT port and TFT/LVDS LCD with up to 4MB shared memory.
One RS-232, one RS-232/RS-485 ports, parallel, floppy, and PCI IDE interface.
Compact Flash socket for 3.3V Compact Flash and Micro Drives.
PS/2 compatible keyboard and mouse interface.
Providing header for external speaker and hard disk access LED.
Two USB (1.1) ports and Software programmable watchdog timer.
Flash BIOS with easy upgrade utility.
PC/104 form factor, 90.2 mm x 95.9 mm (3.55” x 3.775”)
Power requirement: +5V only, 1.5A maximum.
4

FabiaTech Corporation
PackingList
Upon receiving the package, verify the following things. If any of the mentioned
happens, contact us for immediate service.
•Unpack and inspect the FB2410 package for possible damage that may
occur during the delivery process.
•Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.
•If the cable(s) you use to install the FB2410 is not supplied from us, please
make sure the specification of the cable(s) is compatible with the FB2410
system.
Note: After FB2410 is installed, it is recommended that you keep the diskette or
CD that contains drivers and document files, and keep the document
copies, or unused cables in the carton for future use.
The following list the accessories that may be included in your FB2410 package.
Some of the accessories are optional shipped only upon order.
•One FB2410 All-In-One PC/104 CPU board.
•One VGA (CRT interface) adapter cable.
•One 44-pin hard disk drive interface cable.
•One 20-pin to 34-pin floppy driver interface cable.
•Two serial port adapter cables.
•One PS2 keyboard and mouse port adapter cable.
•One 10-pin LAN adapter cable with FB4605A board.
•One USB adapter cable. (Optional items)
•One compact disc containing manual file in PDF format and necessary
drivers and utilities.
5

FabiaTech Corporation
6

FabiaTech Corporation
Chapter2HardwareInstallation
This chapter introduces the system connectors & jumper settings, and guides you to
apply them for field application.
BeforeInstallation
Before you install the system, make sure you follow the below descriptions.
1. Before removing the board from its anti-static bag, wear an anti-static strap to
prevent the generation of Electricity Static Discharge (ESD). The ESD may be
generated by man’s physical touch. It may do damage to the board circuit.
2. Install any connector, module, or add on card, be sure that the power is
disconnected from the system board. If not, this may damage the system
board components, module, or the add-on-card.
3. When you connect the connectors and memory modules, be careful with the
pin orientations.
7

FabiaTech Corporation
HardwareFeatures
The following list is for the setup of the connectors and jumpers of the FB2410.
Item Description
CN1 6-pin for Keyboard and Mouse connector (JST)
CN2 10-pin 2.0mm COM2 RS-232/RS485 port connector (IDC)
CN3 10-pin 2.0mm COM1 RS-232 port connector (IDC)
CN4 26-pin 2.0mm parallel port connector (IDC)
CN5 44-pin 2.0mm IDE hard disk connector (IDC)
CN6 20-pin 2.0mm floppy connector (IDC).
CN7 40-pin LCD Connector with 24 bit LCD signals (DF13)
CN8 10-pin 2.0mm CRT connector (IDC)
CN9 30-pin LCD Connector with LVDS LCD signals (DF13)
CN10 5-pin Power Connector for LCD inverter board (JST)
CF1,JP1 Compact Flash Socket and Master/Slave Select
JP2 RS232/RS-485 Select Header
JP3 Clear CMOS data and Select external battery header
JP4 Terminator header for RS485
J1 10-pin for RJ45-Lan 2.54mm connector (JST)
J2 10-pin USB ports #0/1 2.54mm connector header
J3 2-pin Reset header
J4 2-pin for HDD LED indicator header
J5 2-pin for external speaker header
J6 Reserved
J7 4-pin Power connector
J8 2-pin for external battery header
LED1 Power and watchdog of LED indicator
BUS1 PC-104 Connector
DIMM1 SDRAM So-DIMM Socket 144-pin
8

FabiaTech Corporation
J7: Power Connector (4-pin 2.5mm JST)
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1
J
7
PIN Signal
J3: Reset Header
J3 is a 2-pin header for connecting to system reset button. Shorting the circuit of
the 2 pins makes the hardware reset and FB2410 restart system. It is similar to power
off the system and then power it on again.
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1
1 VCC (+5V)
2 Ground
3 Ground
4 VDD (+12V)
PIN Signal
1 Reset +
2 Reset -
Note: Be careful with the pin orientation when installing power connector. A wrong
connection can easily destroy your FB2410 board.
+12V is not necessar
y
.
Note: FB2410 needs +5V only,
41
J3
1
2
9

FabiaTech Corporation
J1: RJ45 LAN /Adapter Connector with LED indicators
FB4605A is a RJ45 connector with 2 LEDs for LAN. The left side LED (orange)
indicates data which is being accessed and the right side LED (green) indicates on-
line status. (On indicates on-line and Off indicates off-line) J1 provides twist-pair
signals of LAN port if you got LAN version and adapter board (FB4605A) with cable.
The following lists the pin assignments of J1 to RJ45 connector on the FB4605A LAN
adapter board:
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1
RJ45 connector on FB4605A adapter
board
1
8
(Front View)
The following list the pin assignments of J1.
J1 Signal RJ45
J1 Signal RJ45
1 TPTX+ 1 6 Access LED -
2 TPTX - 2 7 On-Line LED -
3 TPRX+ 3 8 Case GND -
4 TPRX - 6 FBG1 49 FBG1 5
FBG2 7
5 LED
Common
-
10
FBG2 8
10

FabiaTech Corporation
CN1: Keyboard/Mouse Connector
CN1 is a 6-pin 2.0mm JST connector, use the included KB/MS adapter cables you
can attach standard PS/2 type keyboard and mouse.
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1 CN1
1 6
PIN Signal
1 Mouse Data
2 Keyboard Data
3 Ground
4 VCC
5 Mouse Clock
6 Keyboard Clock
J5: External Speaker Header
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1 J5
PIN Signal
1 Speaker+
2 Speaker-
1
2
11

FabiaTech Corporation
J2: USB Connector
Use the USB adapter cable and FB4641 board, you can attach up to 2 USB devices.
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
J2
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1 10
2
9
1
PIN Description PIN Description
1 USBV0 2 Case Ground
3 USBD0- 4 USBG1
5 USBD0+ 6 USBD1+
7 USBG0 8 USBD1-
9 Case Ground 10 USBV1
LED1: Power/WatchDog LED indicator, J4: External HDD LED Header
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1 J4
PIN Signal
1 HDD LED+
2 HDD LED -
2
1
12

FabiaTech Corporation
J8 & JP3: External Battery Connector and Battery Select Jumper
J8 is used to connect an external battery pack if on-board Lithium battery is empty,
and please setting JP3 properly of in-board battery or external battery .You can
use JP3 to clear CMOS data. The CMOS store information like system date, time,
boot up device, password, IRQ… which are set up with the BIOS. To clear the
CMOS, set JP3 to open and then return to 1-2 before system power off. The default
setting is 1-2. JP3
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3
123
3
12
BUS1 J8
BT1
LED1
JP1
On-Board Battery
Default 123
External Battery
Clear CMOS Data
J8
1
2
Pin 1:Battery +
Pin 2:Battery -
Note: 2.6V ~3.6V
13

FabiaTech Corporation
CN5: IDE hard Disk Connectors
CN5 is 44-pin 2.0mm IDC connectors. Use the included hard disk cables to attach
up to two 2.5” hard disk drives.
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1
The following table lists the pin description of CN5.
Pin Description Pin Description
1 -RESET 2 GROUND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 NOT USED
21 IDEDREQ 22 GROUND
23 -IOW A 24 GROUND
25 -IOR A 26 GROUND
27 IDEIORDYA 28 GROUND
29 -DACKA 30 GROUND
31 AINT 32 GROUND
33 SA 1 34 Not Used
35 SA 0 36 SA 2
37 CS 0 38 CS 1
39 HD LED A 40 GROUND
41 VCC 42 VCC
43 GROUND 44 Not Used
44
2
1
43
CN5 – Hard disk connecto
r
14
Note: Be careful with the pin orientation when installing connectors and the cables.
A wrong connection can easily destroy your hard disk. CN5 is used to connect a
2.5" HDD with included 44-pin flat-cable or 44-pin DiskOnModule directly.

FabiaTech Corporation
CN6: Floppy Connector
The included floppy drive interface cable is used to transfer 20-pin connector into
standard 34-pin connector. The following table shows signal connections between
20-pin & 34-pin connectors.
J3
JP4
J4
CN7
CN10
CN9
CN8 J6
J5
J1 CN1 CN2
J2
CN4
CN6
CN3
CN5
J7 JP2 JP3BUS1 J8
BT1
LED1
JP1 CN6
20
19
2
1
The following table shows signal connections.
20-pin Signal 34-pin 20-pin Signal 34-pin
1 Drive Enable A 2 12 Ground 23
2 -Index 8 13 -Write Enable 24
3 -Select A 12 14 -Track 0 26
4 Ground 11 15 -Write Protect 28
5 -Motor A 16 16 Ground 29
6 - Select B 14 17 -Read Data 30
7 -Motor B 10 18 -Head 32
8 Ground 9 19 -Disk Change 34
9 -Direction 18 20 Ground 31
10 -Step 20
11 -Write Data 22 - No Connection Others
15