fantastic furniture Como Bed Head Double User manual

Version 1.0
Como
Bed Head Double
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love！
Recommended weight capacity : 50kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Box 1: Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Bottom Panel (P4);
Back Panel (P5);
2 x Side Panels (P6);
2 x Side Panels (P7);
2 x Shelf Panels (P8);
2 x Shelf Panels (P9);
2 x Back Panels (P10);
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
Top Panel
(P1)
Right Side
Panel
(P3)
Shelf Panel
(P8)
Shelf Panel
(P9)
Shelf Panel
(P9)
Bottom Panel
(P4)
Shelf Panel
(P8)
Side Panel
(P6)
Side Panel
(P6)
Side Panel
(P7)
Side Panel
(P7)
Left Side
Panel
(P2)
Back Panel
(P5)
Back
Panel
(P10)
Back
Panel
(P10)
28 x Dowels
(H1)
5 x Long Screws
(H2)
31 x Cam Bolts
(H3)
8 x Plastic Glides
(H5)
31 x Cam Nuts
(H4)
1 x Allen Key
(H7)
2 x Long Bolts
(H6)
Hardware pack

You will need
Step 3
6 x Dowels
(H1)
Phillips Head
Screwdriver
4 x Dowels
(H1)
5 x Cam Bolts
(H3)
H3
H3
(P2) (P3)
H1
H3
H1
H3
H1
H3
H1
H1
H1H3
H3
Raw Edge
(P1)
Step 1
Step 2
You will need
Attach 2 x Cam Bolts (H3) into Side Panels (P2, P3) as shown.
Insert 4 x Dowels (H1) into the holes of Back Panel (P5).
Insert 2 x Cam Nuts (H4) into the holes of Back Panel (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P2, P3) to Back Panel (P5), then tighten the cam nuts using a Phillips
Head Screwdriver.
fantasticfurniture.com.au Page 5
2 x Cam Nuts
(H4)
Phillips Head
Screwdriver
Insert 6 x Dowels (H1) into the holes of Top Panel (P1).
Attach 5 x Cam Bolts (H3) into Top Panel (P1) as shown.
You will need
2 x Cam Bolts
(H3)
Phillips head
screwdriver
(P5)
(P3)
(P2)
H1
H1
H4
Raw Edge
H1
H1
H4
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Step 5
You will need
6 x Dowels
(H1)
5 x Long
Screws(H2)
Phillips Head
Screwdriver
Step 4
You will need
5 x Cam Nuts
(H4)
Phillips Head
Screwdriver
Insert 5 x Cam Nuts (H4) into the holes of Back Panel (P5) and Side Panels (P2, P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Top Panel (P1) into place, then tighten the cam nuts using a Phillips
Head Screwdriver.
(P5)
(P4)
(P2)
(P3)
H1
H1
H1
H1
H1
H2
H2
H2
H2
H2
Insert 6 x Dowels (H1) into the holes of Side Panels (P2, P3) and Back Panel (P5).
Attach Bottom Panel (P4) to the right place with 5 x Long Screws (H2) using a
Philips Head Screwdriver.
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
(P5)
(P1)
(P2)
(P3)
H4
H4
H4
H4
H4

You will need
Step 7
Insert 4 x Dowels (H1) into the holes of Side Panels (P6, P7).
Attach 8 x Cam Bolts (H3) into Side Panels (P6, P7) as Shown.
Insert 8 x Cam Nuts (H4) into the holes of Shelf Panels (P8, P9).
Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Push Side Panels (P6, P7) into place, then tighten the
cam nuts using a Philips Head Screwdriver.
You will need
Step 6
8 x Cam Nuts
(H4)
8 x Cam Bolts
(H3)
4 x Dowels
(H1)
Phillips Head
Screwdriver
fantasticfurniture.com.au Page 7
Phillips Head
Screwdriver
(P6)
(P7)
H1
H1
H1
H1
H3
H3
H3
H3
H3
H3
H3
H3
(P6)
(P7)
(P8)
(P9)
H4
H4
H4
H4
H4
H4
H4

You will need
Step 9
Put Back Panel (P10) into the grooves of Side Panels (P6, P7) as shown.
Repeat Step 6 to Step 8 for the other Side Panels (P6, P7),
Shelf Panels (P8, P9) and Back Panel (P10).
Insert 4 x Dowels (H1) into the holes of Bottom Panel (P4).
Attach 8 x Cam Bolts (H3) into Bottom Panel (P4) as Shown.
Step 8
4 x Dowels
(H1)
fantasticfurniture.com.au Page 8
8 x Cam Bolts
(H3)
Phillips Head
Screwdriver
(P6)
(P7)
(P10)
(P4)
H3
H3
H3
H3
H1
H1
H3
H3
H3
H3 H1
H1

Step 11
Carefully turn the storage over to an upright position.
fantasticfurniture.com.au Page 9
You will need
Step 10
Phillips Head
Screwdriver
8 x Plastic
Glides (H5)
8 x Cam Nuts
(H4)
Insert 8 x Cam Nuts (H4) into the holes of Side Panels (P6, P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push the two frame into place, then tighten the cam nuts using a Flat head screwdriver.
Hammer 8 x Plastic Glides (H5) on the bottom of Side Panels (P6, P7) as shown.
H5
H5
H5
H5
H5
H5
H5
H5
(P6) (P7)
(P4)
(P6)
(P7)
H4
H4
H4
H4
H4
H4
Raw Edge
Hammer

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
H7
H6
H7
H6
Attach the storage to bedhead with 2 x Long Bolts (H6) using Allen Key (H7).
You will need
Step 12
2 x Long Bolts
(H6)
1 x Allen Key
(H7)
fantasticfurniture.com.au Page 10