fantastic furniture Bridge User manual

Bridge
Dresser 6 Drawer Oak

r
3

4

Hardware Pack
Parts list
Top Panel (P1)
Bottom Panel (P2)
Right Panel (P3)
Left Panel (P4)
Middle Panel (P5)
6 x Support Panels (P6)
4 x Back Panels (P7)
2 x Back Support Panels (P8)
3 x Drawer Doors (P9)
3 x Drawer Doors (P10)
6 x Drawer Backs (P11)
6 x Drawer Left Panels (P12)
6 x Drawer Right Panels (P13)
6 x Drawer Bottoms (P14)
6 x Drawer Supports(P15)
2 x Legs (P16)
Support Leg (P17)
Top Panel
(P1)
Bottom Panel
(P2)
Right Panel
(P3)
Left Panel
(P4)
Middle Panel
(P5)
6 x Supports Panel
(P6)
Back Panel
(P7)
Back Support Panel
(P8)
Legs
(P16)
Support Leg
(P17)
6 x Left Runner
Tracks
(H15-1)
62 x Cam Bolts
(H1)
62 x Cam Nuts
(H2)
18 x Dowels
(H3)
12 x Washers
(H5)
12 x Bolts
(H6)
1 x Allen Key
(H7)
4 x Levelling Feet
(H8)
12 x Wedges
(H9)
84 x Short Screws
(H10)
4 x Washers
(H11)
2 x Wall Straps
(H12)
2 x Medium Screws
(H13)
6 x Right Runner
Tracks
(H15-2)
6 x
Runners
(H15-3)
Left 6 x
Runners
(H15-4)
Right
3 x Long Dowels
(H4)
36 x Long Screws
(H14)
2 x Short Bolts
(H16)
Back Panel
(P7)
Drawer Bottoms
(P14)
Drawer Supports
(P15)
6 x Bolts
(H17)
5

2 x Short Bolts
(H16)
1 x Allen Key
(H7)
2 x Legs
(P16)
12 x Washers
(H5)
12 x Bolts
(H6)
1 x Allen Key
(H7)
4 x Levelling Feet
(H8)
1 x Support Leg
(P17)
7
P17
H16
H7
H6
H5
H8
Using 2 x short bolts (H16) secure the Suppot Leg(P17)to the bottom panel (P2), tightening
completely with allen key (H7).
Using 12 x bolts (H6) and 12 x washers (H5), secure the 2 x legs (P15) to the bottom
panel (P2), tightening completely with allen key (H7). Screw in 4 x levelling feet
(H8) into the bottom of the 2 x legs (P16) as shown. Ensure they are secure.
P16
P16
6

6 x Dowels
(H3)
(P2)
With assistance, carefully turn the bottom panel upright.
Insert 6 x dowels (H3) into the bottom panel (P2).
36 x Short Screws
(H10)
6 x Left Runner
Track
(H15-1)
6 x Right Runner
Track
(H15-2)
4
P3
P4
P5
(H15-1)
(H15-2)
(H15-1)
(H10)
(H15-2)
Secure 3 x right runner tracks (H15-2) to the right panel (P3) using 6 x short screws (H10),
tightening with the phillips head screwdriver.
Repeat this step for the other 3 x right runner tracks (H15-2) and 6 x left runner
tracks (H15-1) to middle panel (P5) and left panel (P4).
7

5
8
(P3)
10 x Cam Bolts
(H1)
6 x Dowels
(H3)
Phillips Head
Screwdriver
Insert 3 x dowels (H3) into right panel (P3) and secure 5 x cam bolts (H1) to
right panel (P3), tightening with a phillips head screwdriver.
Repeat this step for the left panel (P4).
(H3)
(H1)
(H3)
(H1)
(H3) (P4)
(H1)
(H3)
(H1)
(H3)
(H1) (H1)
6
3 x L ong Dowels
(H4)
(P5)
10 x Cam Bolts
(H1)
(H4)
(H1)
(H1)
(H1)
Insert 3 x long dowels (H4) and secure 5 x cam bolts (H1) to middle panel (P5),
tightening with the a phillips head screwdriver.
Repeat this process for the other side of the middle panel (P5).
Phillips Head
Screwdriver

H2
H2
7
8
9
10 x Cam Nuts
(H2)
Phillips Head
Screwdriver P6
P8 P4
P5
Align and attach 3 x support panels (P6) and 1 x back support panel (P8) to the Left
panel (P4).
With assistance, align and attach the middle panel (P5) to the 3 x support
panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts
(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the
arrow points towards the incoming cam bolt. Secure the panels together by
tightening the cam nuts (H2) using a phillips head screwdriver.
Note: attach the back support panel (P8) on the side closest to the grooves.
10 x Cam Nuts
(H2)
Phillips Head
Screwdriver
P4
P5
P6
P8
P5
P3
Align and attach 3 x support panels (P6) and 1 x back support panel (P8)
to the middle panel (P5).
With assistance, align and attach the right panel (P3) to the 3 x support
panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts
(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the arrow
points towards the incoming cam bolt. Secure the panels together by
tightening the cam nuts (H2) using a phillips head screwdriver.

9
10
10
P7
P7
With assistance, carefully turn the assembled frame upright.
Slide 2 x back panels(P7) into the grooves of the left, right and
middle panel (P3, P4, P5).
P4
P5
P3
P2
P4
P5
P3
With assistance, align the bottom panel (P2) onto the assembled frame as shown.
Ensure the grooves on all panels align. attach with 6 x Bolts (H17) by tightening with
Allen Key (H7).
6 x Bolts
(H17)
(H17)
1 x Allen Key
(H7)
(H7)