fantastic furniture Flexi User manual

Version 1.0
Flexi
Trundle Drawer Single
fantasticfurniture.com.au
Option 1:
Storage Drawer
with Divider
Option 2:
Trundle

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Drawer Front (P1);
Drawer Front (P2);
2 x Drawer Sides (P3);
Drawer Back (P4);
2 x Drawer Supports (P5);
2 x Drawer Supports (P6);
2 x Drawer Base (P7);
Drawer Base (P8):
Divider (P9):
Hardware pack
Drawer
Front (P1)
Drawer
Front (P2)
Drawer
Side (P3)
Drawer
Side (P3)
Drawer
Back (P4)
Drawer
Base (P7)
Drawer
Base (P7)
Drawer
Base (P8)
Divider
(P9)
2 x Drawer
Support
(P5)
2 x Drawer
Support
(P6)
18 x Screws
(H3)
8x Wheels
(H4)
16 x Small
Screws
(H5)
6 x Bolts
(H6)
1 x Allen Key
(H1)
38 x Large
Screws
(H2)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE

(P4)
(P4)
(P2)
(P2)
(P9)
(P3)
(P3)
You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
Attach Drawer Front (P2) and Drawer Back (P4) to Divider (P9) with 4 x Large Screws (H2)
by tightening with the Phillips Head Screwdriver.
Flexi
Trundle Drawer Single
fantasticfurniture.com.au
fantasticfurniture.com.au Page 5
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
Attach Drawer Sides (P3 x 2) to Drawer Front (P2) and Drawer Back (P4) with 8 x
Large Screws (H2) by tightening with the Phillips Head Screwdriver.
H2
H2
H2
4 x Large
Screws (H2)
8 x Large
Screws (H2)
Note: If you would like to
assemble the trundle, please
start with step 2, and you will
not require the Divider (P9).
You can keep this panel for
future if you want to convert it
to a drawer.
Note: If you would like to
assemble the storage
drawer please start with
step 1.
H2

You will need
Step 3
Step 4
You will need
Attach Drawer Bases (P7 x 2, P8) to Drawer Front (P2), Drawer Sides (P3 x 2) and Drawer
Back (P4) with 26 x Large Screws (H2) by tightening with the Phillips Head Screwdriver.
Attach Drawer Supports (P5 x 2, P6 x 2) to Drawer Base (P7 x 2, P8) with
18 x Screws (H3) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(P4)
(P2)
(P3)
(P3)
(P7)
(P8)
(P7)
(P7)
(P5)
(P5)
(P6)
(P6)
(P7)
(P8)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
H2
H2
H2
H2
26 x Large
Screws (H2)
18 x Screws
(H3)

Attach 8 x Wheels (H4) to Drawer Supports (P5 x 2, P6 x 2) with 16 x Small Screws (H5)
by tightening with the Phillips Head Screwdriver.
Attach Drawer Front (P1) to Drawer Front (P2) with 6 x Bolts (H6) by tightening
with an Allen Key (H1).
You will need
Step 6
You will need
Step 5
Phillips Head
Screwdriver
(P5)
(P5)
(P6)
(P6)
(P1)
(P2)
fantasticfurniture.com.au Page 7
H5
H4
H5
H5
H4
H5 H5
H4
H4
H5
H5
H5
H5
H5
H6
H6
H1
H6
H6
H6
H6
H6
H4
H4
H4
H4
H4
6 x Bolts
(H6)
1 x Allen Key
(H1)
8 x Wheels
(H4)
16 x Small
Screws (H5)

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 8