fantastic furniture Sedona User manual

Version 1.1
Sedona
Cabinet 2 Door Light Oak
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity : 10KG/Shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Maintenance:
Rub paran wax or spray silicone spray on the bottom of the grooves
on the top and bottom panels and slide the doors back and forth.

Assembly checklist
Useful information
Read through the instructionscarefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
!Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 4
fantasticfurniture.com.au

What you need
to assemble the product
Page 5fantasticfurniture.com.au
Hardware pack

Page 6
Step 1
Fix 8 x Cam Bolts (H4) into Top Panel (P3), by tightening with a Phillips Head
Screwdriver.
Insert 4 x Dowels (H9) into Top Panel (P3) as shown.
fantasticfurniture.com.au

Page 7
Step 2
Insert 4 x Cam Nuts (H5) into Side Panels (P6 & P7).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Attach Side Panels (P6 & P7) to the Top Panel (P3), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver.
Attach Bracket (H10) to the Top Panel (P3) with Bracket Screw (H11),
tightening with a Phillips Head Screwdriver.
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Page 8
Step 3
Slot in the Back Panel (P11) into the grooves of Panels (P6, P7 & P3) as shown.
Ensure the panel is slotted in fully.
fantasticfurniture.com.au

Page 9
Step 4
Fix 4 x Cam Bolts (H4) into Centre Shelf (P4), by tightening with a Phillips
Head Screwdriver.
fantasticfurniture.com.au

Page 10
Step 5
Insert 4 x Cam Nuts (H5) into 2 x Centre Panels (P8).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Attach 2 x Centre Panels (P8) to the Centre Shelf (P4), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver.
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Page 11
Step 6
Carefully lift the assembled unit and attach 2 x Centre Panels (P8) to the
Top Panel (P3) by aligning holes as shown.
fantasticfurniture.com.au

Page 12
Step 7
Insert 4 x Cam Nuts (H5) into 2 x Centre Panels (P8).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Secure 2 x Centre Panels (P8) to Top Panel (P3) by tightening the Cam Nuts with
a Phillips Head Screwdriver.
Secure the Side Panels (P6 & P7) to Centre Shelf (P4) with 4 x Bolts (H1),
tightening with the Allen Key (H12).
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Page 13
Step 8
Insert 4 x Cam Bolts (H4) into Centre Shelf (P4) by tightening with Phillips Head
Screwdriver.
fantasticfurniture.com.au

Page 14
Step 9
Insert 4 x Cam Nuts (H5) into 2 x Centre Panels (P9).
Rotate the Cam Nuts (H5) so the arrows point towards the incoming bolts.
Attach 2 x Centre Panels (P9) to the Centre Shelf (P4), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver
fantasticfurniture.com.au
Note: the holes must be
towardsback as shown.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Page 15
Step 10
Insert 4 x Dowels (H9) into Side Panels (P6 & P7).
Slot in the Back Panel (P10) into the grooves of Side Panels (P6 & P7)
and the Centre Shelf (P4) as the arrow shown.
Ensure the panel is slotted in fully.
fantasticfurniture.com.au

Page 16
Step 11
Align the Bottom Panel (P5) to the Dowels as shown.
Attach the Bottom Panel (P5) to Side Panels (P6 & P7) and 2 x Centre
Panels(P9) with 8 x Bolts (H1), tightening with the Allen Key (H12).
fantasticfurniture.com.au

Page 17
Step 12
Attach the Leg Frame (P2) to the Leg Frame (P1) with 1 x Long Bolt (H2)
by tightening with Allen Key (H12).
Do not fully tighten the bolts yet.
Repeat process with other set of remaining Leg Frames.
fantasticfurniture.com.au

Page 18
Step 13
Attached the assembled2 x Leg Frames(P1 & P2) to the Bottom Panel (P5) with 8 x
Short Bolts (H3) by tightening with the Allen Key (H12).
fantasticfurniture.com.au

Page 19
Step 14
With assistance, carefully turn the unit upright.
Secure the Back Panel (P10) to the 2 x Centre Panels (P9) with 4 x Short Screws
(H7) in the pre-drilled holes by tightening with a Phillips Head Screwdriver.
Secure Back Panels (P10) in place with 4 x Wedges (H8) and 4 x Short Screws (H7)
by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P10)
(P10)