FLOS Michael Anastassiades COPYCAT F1952030 User manual

1
COPYCAT
Designed by Michael Anastassiades, 2015
F1952030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 2
DATE 16/06/2022

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01.F1950009
–White glass diffuser
02. RF3320100
–Black Plug & kit driver
04. RF1951100
–Kit of snap springs and fixing screws
COPYCAT
F1952030
REV. 2
DATE 16/06/2022

EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
F1950009
WHITE GLASS DIFFUSER
COPYCAT F1952030
REV. 1
DATE 19/07/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Position the body (A) on the diffuser (B) so that the body’s 3 snap springs
(C) are inserted into the slot (D) in the diffuser’s ferrule and lock it by turning
it slightly clockwise.
Remove the diffuser (B) from the body (A) by unfastening it by turning it
counterclockwise.
EN
Fig.1
F1950009
WHITE GLASS DIFFUSER
COPYCAT F1952030
REV. 1
DATE 19/07/2021

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3320100
BLACK PLUG & KIT DRIVER
COPYCAT F1952030
REV. 1
DATE 19/07/2021
Goldman
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small Led
p.11
Wirering
p.20
Tab F
p.03
Kelvin
Led GM
p.03
Tab T
p.03
To-Tie
All
Versions
p.03

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the plug into the driver unit by using the guides snap it inside its
apposite slot (use the correct type of plug for the area in which the device
must be installed), connect the plug to the feeder unit locking it in by
rotating it 90°clockwise.
EN
Fig.1
COPYCAT F1952030
REV. 1
DATE 19/07/2021
RF3320100
BLACK PLUG & KIT DRIVER

EN
7
RF1951100
KIT OF SNAP SPRINGS AND FIXING SCREWS
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 23/06/2021
COPYCAT F1952030

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the diffuser (B) from the body (A) by unfastening it by turning it
counterclockwise.
EN
Fig.1
COPYCAT F1952030
REV. 1
DATE 19/07/2021
RF1951100
KIT OF SNAP SPRINGS AND FIXING SCREWS
B
A

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unfasten the 3 screws (C) from the body (A),
by utilizing an Allen key and then remove the
damaged snap springs (D).
Assemble now the new spare-part:
Install the snap springs (D) on the body (A)
and fasten back the screws (C).
Fig.2
Fig.3
COPYCAT F1952030
REV. 1
DATE 19/07/2021
RF1951100
KIT OF SNAP SPRINGS AND FIXING SCREWS
A
C
D
D
C

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the diffuser (B) from the body (A) by unfastening it by turning it
counterclockwise.
EN
Fig.4
COPYCAT F1952030
REV. 1
DATE 19/07/2021
RF1951100
KIT OF SNAP SPRINGS AND FIXING SCREWS
B
A
D
C