FLOS ARIETTE 2 User manual

REV. 1
DATE 22/06/2021
1
ARIETTE 2
Designed by R. & Tobia Scarpa, 1973
F0500009
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF06111 –Ariette 2 front/rear cloths
02. RF0400100 –«V» shape connector
03. RF04635 –Lamp holder assembly
04. RF05737 –Rod nylon support/6
05. RF05757 –Ariette 2 fiberglass rod D.6 mm 6x670
06. RF05740 –Nylon wall attachment
07. RF0400200 –Kit with grub screw & screw for rod support
ARIETTE 2
F0500009
REV. 1
DATE 22/06/2021



       
           



EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF06111
ARIETTE 2 FRONT/REAR CLOTHS
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

4
ATTENTION!!! Please be careful when doing this operation.
Insert fiberglass rods (H) in proper holes and join them together with “V” shaped connectors (M).
Attach rear fabric diffuser to the four “V” shaped connectors (N).
Attach front fabric diffuser to the “V” shaped connectors (N) with seams facing inside.
EN
Fig.1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
N
H
M
RF06111
ARIETTE 2 FRONT/REAR CLOTHS
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF0400100
FORK WITH PUSH ROD
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

6
ATTENTION!!! Please be careful when doing this operation.
Insert fiberglass rods (H) in proper holes and join them together with “V” shaped connectors (M).
Attach rear fabric diffuser to the four “V” shaped connectors (N).
Attach front fabric diffuser to the “V” shaped connectors (N) with seams facing inside.
EN
Fig.1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF0400100
FORK WITH PUSH ROD
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021
N
H
M

EN
7
RF04635
LAMP HOLDER ASSEMBLY
ARIETTE 2 F0500009
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 22/06/2021

8
Replace the lamp holder assembly.
Connect the electrical wires to the terminals respecting the polarities (Phase = black, Neutral= white, Earth=
green/yellow).
EN
Fig.1
F
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF04635
LAMP HOLDER ASSEMBLY
EF
AG
CDB
TERMINAL
BLOCK
D
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

EN
9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05737
ROD NYLON SUPPORT/6
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

10
Assemble the rod support to the lamp holder assembly utilizing their apposite screws.
EN
Fig.1
A
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05737
ROD NYLON SUPPORT/6
G C D B
D
SAME ROD
SUPPORTS
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05757
ARIETTE 2 FIBERGLASS ROD D.6 mm 6x670
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

12
ATTENTION!!! Please be careful when doing this operation.
Connect to the extremities the rods (H) and fix them inserting them well inside the “V” shape connectors (I) and with
their relative adjustable forks (L).
EN
Fig.1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
H
L
I
RF05757
ARIETTE 2 FIBERGLASS ROD D.6 mm 6x670
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

EN
13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05740
NYLON WALL ATTACHMENT
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

14
Fix the wall attachment to the wall with screws and expansion plugs taking care to pass the power cables through
the central hole;
NOTE: Utilize screws and plugs suitable for the type of installation of the surface where the appliance needs to be
installed.
EN
Fig.1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05740
NYLON WALL ATTACHMENT
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

EN
15
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF0400200
KIT WITH GRUB SCREW & SCREWS FOR ROD SUPPORT
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021

16
Insert the cable through the hole ceiling attachment (C) and through the cable gland hole (I).
EN
Fig.1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF0400200
KIT WITH GRUB SCREW & SCREWS FOR ROD SUPPORT
AGC
DB
D
ARIETTE 2 F0500009
REV. 1
DATE 22/06/2021