FLOS SERENA F6582030 User manual

REV. 1
DATE 02/08/2021
1
SERENA
Designed by Patricia Urquiola, 2015
F6582030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F6581030
–Black leaf-reflector
02. RF6580100
–Kit with magnet for reflector
03. RF3320100
–Black Plug kit & driver
04. RF6605100
–Jack plug with coaxial cable and old dimmer
REV. 1
DATE 02/08/2021
SERENA
F6582030

EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
F6581030
BLACK LEAF-REFLECTOR
SERENA F6582030
REV. 1
DATE 02/08/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the protective film (A) from the leaf (B) starting from the stem as shown
in the figure.
EN
Fig.1
A
B
REV. 1
DATE 02/08/2021
F6581030
BLACK LEAF-REFLECTOR
SERENA F6582030

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Assemble the leaf (B) onto the base (C) inserting the leaf’s fastening clip (D)
onto the base’s pin (E).
EN
Fig.2
B
REV. 1
DATE 02/08/2021
E
D
C
F6581030
BLACK LEAF-REFLECTOR
SERENA F6582030

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
The leaf (B) can work in a position perpendicular to the surface (Fig.3A) or in a
tilted position (Fig.3B).
EN
Fig.3
B
REV. 1
DATE 02/08/2021
B
Fig.3A Fig.3B
F6581030
BLACK LEAF-REFLECTOR
SERENA F6582030

EN
7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF6580100
KIT WITH MAGNET FOR REFLECTOR
REV. 1
DATE 02/08/2021
SERENA F6582030

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the film (A) from the double tap
present on the magnet (F).
Stick the magnet (F) in its apposite slot.
Fig.1
Fig.2
RF6580100
KIT WITH MAGNET FOR REFLECTOR
REV. 1
DATE 02/08/2021
SERENA F6582030
A
F
F

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Assemble the leaf (B) onto the base (C) inserting the leaf's fastening clip (D)
onto the base's pin (E).
Fig.3
RF6580100
KIT WITH MAGNET FOR REFLECTOR
REV. 1
DATE 02/08/2021
B
E
D
C
SERENA F6582030

EN
10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3320100
BLACK PLUG KIT & DRIVER
REV. 1
DATE 02/08/2021
SERENA F6582030
Goldma
n
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small
Led
p.11
p.20
Tab F
p.03
Kelvin
Led
GM
p.03
Tab T
p.03
Wirering

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
REV. 1
DATE 02/08/2021
Insert the plug into the power unit. By using the guides, snap the plug
inside its apposite slot (use the correct type of plug for the country in
which the device must be installed).
SERENA F6582030
RF3320100
BLACK PLUG KIT & DRIVER

EN
12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF6605100
JACK PLUG WITH COAXIAL CABLE AND OLD DIMMER
REV. 1
DATE 02/08/2021
SERENA F6582030
Copycat
p.07
Serena
p.12
Tacci
a
Small
Led
p.08

13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unfasten the 2 screws (A) from underneath the
dimmer and remove the dimmer cover (B).
A
Fig.1
Fig.2
A
B
RF6605100
JACK PLUG WITH COAXIAL CABLE AND OLD DIMMER
REV. 1
DATE 02/08/2021
SERENA F6582030

14
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unfasten the 2 screws (C) of the cable clamp
(D) and disconnect the wires from the terminal
box (F) through a tiny flat headed screw
driver.
Assemble now the new spare-part:
Unfasten the 2 screws (A) from underneath the
dimmer and remove the dimmer cover (B).
Connect the electrical wires to the terminal (F)
respecting the polarities of the dimmer.
Position the cable clamp (D) and fasten back
the screws (C).
Close the dimmer by positioning the cover (B)
and fastening the 2 screws (A).
A
Fig.3
Fig.4
D
B
D
RF6605100
JACK PLUG WITH COAXIAL CABLE AND OLD DIMMER
REV. 1
DATE 02/08/2021
SERENA F6582030