GEZE Powerdrive PL-HT User manual

GEZE
Powerdrive PL-HT
Hermetic sliding door
system
EN Installation instructions
142030- 02

Powerdrive PL-HT
2
Table of contents
1 General information ...............................................................................................................................................3
1.1 Key to symbols...................................................................................................................................................................................................3
1.2 Product liability.................................................................................................................................................................................................3
2 Safety ...........................................................................................................................................................................4
2.1 Intended use.......................................................................................................................................................................................................4
2.2 Safety instructions ...........................................................................................................................................................................................4
2.3 Information for safety-conscious working..............................................................................................................................................5
2.4 Inspection of the installed system.............................................................................................................................................................5
2.5 Environmentally conscious working.........................................................................................................................................................5
3 Overview.....................................................................................................................................................................6
3.1 Diagrams..............................................................................................................................................................................................................6
4 Installation..................................................................................................................................................................7
5 Commissioning.......................................................................................................................................................17
6 Maintenance........................................................................................................................................................... 21
6.1 Maintenance intervals ................................................................................................................................................................................. 21
6.2 Additional maintenance work .................................................................................................................................................................. 21

Powerdrive PL-HT
3
General information
1 General information
1.1 Key to symbols
In these instructions warnings are used to warn against material damage.
XAlways read and observe these warnings!
Warning
symbol
Warning word Meaning
WARNING Danger for individuals.
Non-compliance can result in death or serious injuries.
Important information and technical notes are highlighted to explain the correct operation.
Symbol Meaning
Means "important note"
Means "additional information"
XSymbol for an action: Here you have to do something.
If there are several actions to be taken, keep to the given order.
1.2 Product liability
In accordance with the manufacturer's liability for their products as dened in the German "Produkthaftungs-
gesetz" (Product Liability Act), the information contained in this brochure (product information and proper use,
misuse, product performance, product maintenance, obligations to provide information and instructions) is to be
noted and followed. Failure to comply releases the manufacturer from his statutory liability.

Powerdrive PL-HT
4
Safety
2 Safety
2.1 Intended use
The Powerdrive PL-HT is an automatic sliding door system with sealing door leaves in the closed position.
The Powerdrive PL-HT is designed solely for use
àIn dry rooms,
àIn automatic door systems for horizontally moving door leaves,
àIn entrance and interior areas of pedestrian trac,
àIn commercial plants and public areas.
The Powerdrive PL-HT may not be used as
àAn escape and rescue route door
àA re or smoke proof door
2.2 Safety instructions
àThe mandatory installation, maintenance and repair work must be performed by properly trained personnel
authorised by GEZE.
àComponents made of stainless steel may not be subjected to high temperatures during working. Discoloura-
tions occur at high temperatures in stainless steel. These are permanent and cannot be removed.
àThe country-specic laws and regulations are to be observed during safety-related tests.
àGEZE is not liable for any injuries or damage whatsoever resulting from unauthorised changes to the system.
àGEZE is not liable if products from other manufacturers are used with GEZE equipment.
àFurthermore, only original GEZE parts may be used for repair and maintenance work.
àThe connection to the power supply must be made by a professional electrician. Perform the power connec-
tion and equipment earth conductor test in accordance with VDE 0100 Part 610.
àUse a customer-accessible 10-A overload cut-out as the line-side disconnecting device.
àIn accordance with Machinery Directive 2006/42/EC and DIN 18650, before commissioning the door, a safety
analysis (risk assessment) must be performed and the door system must be labelled in accordance with CE
Marking Directive 98/68/EEC.
àObserve the latest versions of guidelines, standards and country-specic regulations, in particular:
àASR A1.7 "Guidelines for power-operated windows, doors and gates"
àDIN 18650 "Building hardware – Automatic door systems"
àVDE 0100, Part 610 "Installing Electrical Power Systems with Nominal Voltages up to 1000 V"
àDIN EN 60335-2-103 "Safety of electrical devices for home use and similar purposes; special requirements
for drives, for gates, doors and windows"
àAccident-prevention regulations, especially DGUV regulation 1 "Principles of prevention" and
DGUVregulation 3 "Electrical installations and equipment"

Powerdrive PL-HT
5
Safety
2.3 Information for safety-conscious working
àSecure workplace against unauthorised entry.
àWatch swivelling range of long system parts.
àNever carry out work with a high safety risk (e.g. installing the drive, cover or door leaf) while alone.
àSecure the hood/drive panels against falling.
àUse only cables prescribed in the cable plan provided. Lay shields in accordance with the wiring diagram.
àSecure loose, internal drive cables with cable ties.
àBefore working on the electrical system:
àDisconnect the drive from the 230 V mains network and check to ensure that it is not supplied with power
àDisconnect the controller from the 24 V battery
àNote that if an uninterruptible power supply (UPS) is used, the system will still be supplied with power
despite the fact that the power supply is disconnected.
àAlways use insulated wire-end ferrules for wire cores.
àDanger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts!
àDanger of injury through unsecured crushing, impact, drawing-in or shearing spots!
àDanger of injury due to broken glass!
àDanger of injury due to sharp edges in the drive!
àDanger of injury during installation through freely moving parts!
2.4 Inspection of the installed system
àCheck the function of the safety and actuation sensors.
àCheck protective earth connection to all metal parts that can be touched.
àPerform a safety analysis (risk analysis).
2.5 Environmentally conscious working
àWhen disposing of the door system, separate the dierent materials and have them recycled.
àDo not dispose of batteries and storage cells with household waste.
àComply with the statutory regulations when disposing of the door system and the batteries/rechargeable
batteries.

Powerdrive PL-HT
6
Overview
3 Overview
3.1 Diagrams
Number Designation
70722-9-0950 PL-HT installation instructions
160924 Wiring diagram
164883 Wiring diagram supplement
168222 User manual
134358 Safety analysis
108104 Errors and corrective measures
The diagrams are subject to change without notice. Use only the most recent version.

Powerdrive PL-HT
7
Installation
4 Installation
Check the preparations by the customer on site:
àType and load bearing capacity of the façade construction or base construction
àEvenness of the installation surface
àLevelness of the oor in the passage area: ± 1 mm height dierence / m
1

2

    


Powerdrive PL-HT
8
Installation
3

4

*) Not GEZE scope of delivery

Powerdrive PL-HT
9
Installation
5



6



*) Not GEZE scope of delivery

Powerdrive PL-HT
10
Installation
7

 

 

8



Powerdrive PL-HT
11
Installation
9

10
11
St 3.9x32

Powerdrive PL-HT
12
Installation
12
13
14

Powerdrive PL-HT
13
Installation
15
16

Powerdrive PL-HT
14
Installation
17
18

Powerdrive PL-HT
15
Installation
19

Powerdrive PL-HT
16
Installation
20
XInstall and connect all the drive components (see installation instructions Powerdrive PL/PI-FR).
XConnect all the existing operating (e.g. programme switches, etc.), triggering (e.g. movement detectors, etc.)
and safety elements (e.g. light curtains, etc.) (see wiring diagram).
XInstall the accessories.
XConnect the battery to the controller.
Soiling in the track results in inferior moving performance of the door, higher noise development and reduces the
service life of the carrier rollers.
XClean the track after mounting.

Powerdrive PL-HT
17
Commissioning
5 Commissioning
A display programme switch DPS has to be connected to the controller for the commissioning process.
WARNING!
DANGER OF FATAL INJURY DUE TO ELECTRIC SHOCK!
XGet a qualied electrician to connect and disconnect the electrical system (230 V).
XPerform the power connection and equipment earth conductor test in accordance with VDE 0100 Part 610.
1
2

Powerdrive PL-HT
18
Commissioning
3
4

5


Powerdrive PL-HT
19
Commissioning
6
7
8
9
...

Powerdrive PL-HT
20
Commissioning
10
11
12
13