Gima CMS8000 User manual

NEW CMS 8000 MULTIPARAMETER
PATIENT MONITOR
User Manual
PROFESSIONAL MEDICAL PRODUCTS
0123
M35152-GB-Rev.0-06.20
35152 / CMS8000
CONTEC MEDICAL SYSTEMS CO., LTD
No.112 Qinhuang West Street,
Economic & Technical Development Zone,
Qinhuangdao, Hebei Province, PEOPLE’S REPUBLIC OF CHINA
Made in China
Shanghai International Holding Corp. GmbH (Europe)
Eiffestrasse 80, 20537 Hamburg, Germany

I
Copyright
Statement
Our company owns all rights to this unpublished work and intends to maintain this work as confidential. We may also
seek to maintain this work as an unpublished copyright. This publication is to be used solely for the purposes of
reference, operation, maintenance, or repair of our equipment. No part of this can be disseminated for other purposes.
In the event of inadvertent or deliberate publication, our company intends to enforce its rights to this work under
copyright laws as a published work. Those having access to this work may not copy, use, or disclose the information in
this work unless expressly authorized by us to do so.
All information contained in this publication is believed to be correct. Our company shall not be liable for errors
contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of
this material. This publication may refer to information and protected by copyrights or patents and does not convey any
license under the patent rights of our company, nor the rights of others. Our company does not assume any liability
arising out of any infringements of patents or other rights of third parties.
Content of this manual is subject to change without prior notice.
Responsibility on the manufacturer party
Our company is responsible for safety, reliability and performance of this equipment only in the conditions that:
n All installation, expansion, change, modification and repair of this equipment are conducted by our qualified
personnel;
n Applied electrical appliance is in compliance with relevant National Standards;
n The monitor is operated under strict observance of this manual.
WARNING
l This monitor is not a device for treatment purpose.
NOTE:
l This equipment is not intended for family usage.
It is important for the hospital or organization that employs this equipment to carry out a reasonable maintenance
schedule. Neglect of this may result in machine breakdown or injury of human health.
Upon request, our company may provide, with compensation, necessary circuit diagrams, calibration illustration list and
other information to help qualified technician to maintain and repair some parts, which our company may define as user
serviceable.

II
Warranty
Workmanship & Materials
Our company guarantees new equipment other than accessories to be free from defects in workmanship and materials
for a period of 18 months (six months for multi-site probes and SpO2sensor) from date of shipment under normal use
and service. Our company's obligation under this warranty is limited to repairing only.
Exemptions
Our company's obligation or liability under this warranty does not include any transportation or other charges or
liability for direct, indirect or consequential damages or delay resulting from the improper use or application of parts or
accessories of the product or the substitution upon it not approved by us or repaired by anyone other than a our
company authorized personal. This warranty shall not extend to any instrument which has been subjected to abnormal
use, maintenance negligence or damaged; any instrument from which our company's original serial number tag or
product identification markings have been altered or removed, or any product of any other manufacturer.
Safety, Reliability and Performance
Our company is not responsible for the effects on safety, reliability and performance of the Monitor if:
n The components are disassembled, stretched or re-adjusted.
n The Monitor is not used in accordance with the instructions for use, or the electrical installation of the relevant
room does not comply with NFPA 70: National Electrical Code or NFPA 99: Standard for Health Care Facilities
(Outside the United States, the relevant room must comply with all electrical installation regulations mandated by
the local and regional bodies of government).

III
Return Policy
Return Procedure
In the event that it becomes necessary to return a unit to our company, the following procedure should be followed:
n Obtain return authorization. Contact our Service Department and tell us the product serial number. The number is
marked on the outside of the shipping package. Return shipments would not be accepted if the number is not
clearly visible. Please provide the model number, serial number, and a brief description of the reason for return.
n Freight policy. The customer is responsible for freight charges when equipment is shipped to our company for
service (this includes customs charges).
Preface
This manual gives detailed description to the Monitor concerning its performance, operation, and other safety
information. Please read the user manual carefully before use in order to operate this product correctly and guarantee
the safety of patient and operator.
Keep the user manual near the product for convenient and timely accessed when needed.
Following symbols represent some important facts that you have to pay special attention to:
Safety warnings indicate the severity of potential hazards.
Warning: prompting potential dangerous or unsafe operations, if not avoided, it may result in death or severe
personal injury or property damage.
Caution: prompting potential dangerous or unsafe operations, if not avoided, it may result in slight personal
injury, product failure or damage, or property damage.
Note: emphasizing important attentions, providing explanations or interpretations for better use.
NOTE:
l The user manual contains descriptions concerning all configurations, so part of the content may not suitable
for the product your purchased. If you have any doubts, please contact with us.
l Refer to the device for its date of manufacture and service life.
This manual is intended for persons who are familiar with the functioning measurements and have experience in
operating the monitoring equipment.

IV
Contents
Chapter 1 Safety ......................................................................................................................................................1
1.1 Safety information.....................................................................................................................................1
1.2 Precautionary measures.............................................................................................................................2
Chapter 2 General....................................................................................................................................................3
2.1 Introduction ...............................................................................................................................................3
2.2 Contraindications.......................................................................................................................................3
2.3 Main unit ...................................................................................................................................................3
2.4 Display.......................................................................................................................................................9
Chapter 3 Installation ............................................................................................................................................11
3.1 Open the Package and Check ..................................................................................................................11
3.2 Environmental requirement .....................................................................................................................12
3.3 Install the Monitor ...................................................................................................................................12
3.4 Connect the Power Cables.......................................................................................................................12
3.5 Power on..................................................................................................................................................13
3.6 Power off .................................................................................................................................................14
Chapter 4 System Menu ........................................................................................................................................15
4.1 Patient Information Setup........................................................................................................................15
4.2 Default setup............................................................................................................................................16
4.3 Trend Review, Measurement Review and Alarm Event Review.............................................................16
4.4 System setup............................................................................................................................................17
4.5 Machine version ......................................................................................................................................23
4.6 Drug calculation ......................................................................................................................................23
4.7 Maintain...................................................................................................................................................23
4.8 Demo .......................................................................................................................................................26
Chapter 5 Alarm ....................................................................................................................................................27
5.1 Alarm classification.................................................................................................................................27
5.2 Alarm level..............................................................................................................................................27
5.3 Alarm mode.............................................................................................................................................28
5.4 Alarm setup .............................................................................................................................................28
5.5 Alarm status.............................................................................................................................................30
5.6 Measures for Alarm occurs......................................................................................................................31
5.7 Probe-off alarm........................................................................................................................................31
Chapter 6 Freeze....................................................................................................................................................32
6.1 Enter/Exit Freeze Status ..........................................................................................................................32
6.2 FREEZE Menu ........................................................................................................................................32
6.3 Reviewing Frozen Waveform..................................................................................................................32
6.4 Recording Frozen Waveform...................................................................................................................33

V
Chapter 7 Recording..............................................................................................................................................34
7.1 General Information for Recorder ...........................................................................................................34
7.2 Recording Type........................................................................................................................................34
7.3 Recording Start&Stop..............................................................................................................................36
7.4 Recorder Operations and Status Messages..............................................................................................37
Chapter 8 Recall ....................................................................................................................................................39
8.1 Trend Graph.............................................................................................................................................39
8.2 Trend Table..............................................................................................................................................41
8.3 NIBP recall ..............................................................................................................................................42
8.4 Alarm recall.............................................................................................................................................42
8.5 SD recall..................................................................................................................................................43
Chapter 9 Drug Calculation and Titration Table....................................................................................................48
9.1 Drug Calculation .....................................................................................................................................48
9.2 Titration Table .........................................................................................................................................49
Chapter 10 ECG Monitoring .................................................................................................................................51
10.1 Introduction ...........................................................................................................................................51
10.2 Safety information.................................................................................................................................51
10.3 Monitoring Procedure............................................................................................................................52
10.4 ECG Screen Hot Keys...........................................................................................................................56
10.5 ECG setup..............................................................................................................................................57
10.6 ECG Alarm and Prompt Message..........................................................................................................59
10.7 ST Segment Monitoring ........................................................................................................................60
10.8 ARR Monitoring....................................................................................................................................62
Chapter 11 RESP Monitoring................................................................................................................................67
11.1 Introduction ...........................................................................................................................................67
11.2 Safety information .................................................................................................................................67
11.3 Placement for RESP electrode...............................................................................................................67
11.4 RESP SETUP.........................................................................................................................................68
11.5 RESP Alarm message ............................................................................................................................68
Chapter 12 SpO2Monitoring.................................................................................................................................69
12.1 Introduction ...........................................................................................................................................69
12.2 Safety information.................................................................................................................................69
12.3 SpO2Measurement................................................................................................................................70
12.4 Monitoring steps....................................................................................................................................70
12.5 Measurement Limitations......................................................................................................................71
12.6 SpO2SETUP .........................................................................................................................................72
12.7 SpO2Alarm message .............................................................................................................................72
Chapter 13 NIBP Monitoring ................................................................................................................................74

VI
13.1 Introduction ...........................................................................................................................................74
13.2 Safety information.................................................................................................................................74
13.3 Measurement Limitations......................................................................................................................75
13.4 Measurement steps ................................................................................................................................75
13.5 Operation hints ......................................................................................................................................76
13.6 Amend results........................................................................................................................................77
13.7 NIBP display..........................................................................................................................................77
13.8 NIBP SETUP.........................................................................................................................................77
13.9 NIBP Calibration ...................................................................................................................................80
13.10 NIBP Alarm Message ..........................................................................................................................80
Chapter 14 TEMP Monitoring...............................................................................................................................83
14.1 Introduction ...........................................................................................................................................83
14.2 Safety information.................................................................................................................................83
14.3 Measurement .........................................................................................................................................83
14.4 TEMP SETUP .......................................................................................................................................83
14.5 TEMPAlarm message...........................................................................................................................84
Chapter 15 IBP Monitoring ...................................................................................................................................85
15.1 Introduction ...........................................................................................................................................85
15.2 Safety information.................................................................................................................................85
15.3 Monitoring Procedure............................................................................................................................85
15.4 Setting for label name............................................................................................................................86
15.5 IBP Menu...............................................................................................................................................86
15.6 IBP Scale Setup .....................................................................................................................................87
15.7 IBP Pressure Zero..................................................................................................................................88
15.8 IBP Calibration......................................................................................................................................89
15.9 Troubleshooting for Pressure Calibration..............................................................................................90
15.10 Alarm Information and Prompts..........................................................................................................90
Chapter 16 CO2Measuring....................................................................................................................................93
16.1 Introduction ...........................................................................................................................................93
16.2 Safety information.................................................................................................................................93
16.3 Monitoring steps....................................................................................................................................94
16.4 CO2Menu..............................................................................................................................................96
16.5 Influence factors ....................................................................................................................................98
16.6 Alarm Information and Prompts............................................................................................................98
Chapter 17 Battery...............................................................................................................................................100
17.1 Introduction .........................................................................................................................................100
17.2 Battery status information ......................................................................................................................100
17.3 Battery installation...............................................................................................................................100

VII
17.4 Check for battery performatnce...........................................................................................................100
17.5 Battery maintenance ............................................................................................................................101
17.6 Battery recycle.....................................................................................................................................101
Chapter 18 Maintenance and Cleaning................................................................................................................103
18.1 Introduction .........................................................................................................................................103
18.2 Cleaning...............................................................................................................................................103
18.3 Disinfection .........................................................................................................................................105
Chapter 19 Maintenance......................................................................................................................................106
19.1 Check...................................................................................................................................................106
19.2 Troubleshooting...................................................................................................................................106
19.3 Maintenance plan.................................................................................................................................108
Chapter 20 Accessories .......................................................................................................................................109
20.1 ECG Accessories .................................................................................................................................109
20.2 SpO2 Accessories.................................................................................................................................109
20.3 NIBP Accessories ................................................................................................................................110
20.4 TEMPAccessories...............................................................................................................................110
20.5 IBP accessories....................................................................................................................................110
20.6 CO2Accessories ..................................................................................................................................110
Chapter 21 Default Settings.................................................................................................................................112
21.1 Country-Specific Default Settings.......................................................................................................112
21.2 Alarm and Measurement Default Settings...........................................................................................118
Appendix A Product Specification ......................................................................................................................123
Appendix B EMC Test Level Declaration - Guidance and Manufacture’s Declaration......................................131
Appendix C System Alarm Prompt .....................................................................................................................135
Appendix D SpO2Clinical Information ..............................................................................................................140
Appendix E Abbreviations ..................................................................................................................................142

1
Chapter 1 Safety
1.1 Safety information
WARNING
l Before using the device, the equipment, patient cable and electrodes etc. should be checked. Replacement
should be taken if there is any evident defect or signs of aging which may impair the safety or performance.
l The Monitor is intended for clinical monitoring application with operation only granted to appropriate
medical staff.
l The monitor can be used on only one patient at a time.
l EXPLOSION HAZARD-Do not use the device in a flammable atmosphere where concentrations of
flammable anesthetics or other materials may occur.
l There could be hazard of electrical shock by opening the monitor casing. All servicing and future upgrading
to this equipment must be carried out by personnel trained and authorized by our company.
l To prevent delayed treatment, sufficient alarm setup should be done according to individual patient
situation and make sure that alarm sound can be activated when alarm occurs.
l Do not touch the patient, table, or the device during defibrillation.
l The device is available to connecting with the patient who using cardiac pacemaker or other electrical
stimulation devices, but this may result in risks.
l When used with Electro-surgery equipment, the operator (doctor or nurse) must give top priority to the
patient safety.
l The monitor and devices connected to it shall form an equipotential system (protective earthing).
l If the protective earthing system is unstable, the monitor should apply internal power supply.
l This device can only be connected to a power socket with protective earthing. If the power socket is not
grounded, do not use the socket and the monitor should be power supplied by rechargeable batteries. Do not
connect the three-wire cable to a second-wire plug.
l The information of physiological waveform, physiological parameters and alarm, etc., shown on the monitor
is for medical reference only, it can not be regarded as the basis for clinical treatment directly.
l Be careful to place the power cord and various cables of accessories to avoid the patient being wound or
suffocated, or the cable entangled together, or subject to electrical interference.
l The disposal of scrap device, its accessories and packaging should follow the local laws and regulations,
to avoid polluting to the local environment. And the packaging materials must be placed in the region
where the children are out of reaching.
CAUTION
l The monitor's service life is 5 years. At the end of its service life, the product described in this manual, as
well as its accessories, must be disposed in compliance with related local regulations or hospital regulations.

2
If you have questions concerning disposal of the product, please contact our company or representative
institution.
l When you have questions about the integrity of the external grounding of the monitor and its arrangement,
the internal battery must be used for operation.
l Electromagnetic fields can affect the performance of the monitor, so other equipment used near the monitor
must meet the appropriate EMC requirements. Mobile phones, X-rays, or MRI devices are possible sources
of interference because they could emit high-intensity electromagnetic radiation.
l Before turning on the power to the device, make sure that the supply voltage and frequency match the
device's label or the requirements specified in this manual.
l When the battery is about to exceed its service life, remove the battery immediately from the monitor.
l To ensure patient safety, please use the accessories specified in this manual.
NOTE:
l Install the equipment in a location that is easy to observe, operate and maintain.
l If the monitor gets damp accidentally, or the liquid is dumped on the equipment or accessories, especially if
the liquid is likely to enter the monitor, please contact the service personnel in time.
l The software is developed in accordance with IEC62304. The possibility of risks caused by program error
has been minimized.
l The pictures and interfaces in this manual are for reference only, please in kind prevail.
1.2 Precautionary measures
l In order to avoid the accumulation of electrostatic charge, it is recommended to store, maintain and use the
equipment at a relative humidity of 30% or more. The floor should be covered with ESD dissipated carpets or
similar materials. In the use of the components, non-synthetic clothing should be wore.
l In order to prevent electrostatic discharging to the ESD-sensitive parts of the device, the personnel should contact
the metal frame of the components or the large metal objects near the device. When using the device, especially
when it is possible to contact the ESD-sensitive parts of the device, the operator should wear a grounded bracelet
designed for ESD-sensitive devices. For more information on proper use, please refer to the instructions provided
with the bracelet.
ESD Precautionary procedure training
l All potential users are advised to understand the ESD warning symbols and receive training on ESD precautions.
l The most basic content of the ESD precautionary procedure training should include an introduction to electrostatic
charge physics, voltage level in the conventional case, and damage to the electronic components when the operator
with electrostatic charge contacts them. In addition, the methods for preventing electrostatic buildup, and the
manner and reasons for the release of human body static electricity to the ground or equipment frame or the use of
a bracelet to connect the human body to the equipment or the ground before establishing the connection should be
described.

3
Chapter 2 General
2.1 Introduction
Structure and composing: main unit, accessories (ECG lead cables, SpO2sensor, NIBP extension tube, NIBP cuff,
TEMP probe, etc.) and power cord.
The monitor is applicable for the clinical monitoring of adult, pediatric and neonate(SpO2function is inapplicable on
neonate in American). Physiological parameters including ECG (including ST-segment measurement and arrhythmia
analysis), RESP, SpO2, PR, NIBP, TEMP,IBP and CO2, can be monitored. The monitoring information could be
displayed, reviewed and printed.
WARNING
l The monitor should be used by a qualified clinician or under the guidance of a professional clinician.
Personnel who uses this monitor should be adequately trained. The personnel without authorized or who
are not trained, shall not carry out any operation.
2.2 Contraindications
No contraindications.
2.3 Main unit
Front view
CMS7000
1
2
10
5
9
11
7
6
4
3
8
12

4
CMS8000
CMS9000
1
11
9
10
2
6
12
3
4
5
7
8
12
10
4
9
7
1
11
8
6
5
3
2

5
1
AC indicator:
On: the monitor is connected to AC power supply;
Off: the monitor is disconnected from AC power supply.
2
Battery status indicator: it displays green and flickers under battery-powered condition, it always
displays orange in charging state and green after fully charged.
Or Running indicator: when the device turns on, this indicator will be lighting, when it tuns off,
this indicator will go out.Please make the object as the standard.
3
MENU：Press this button to call up the SYSTEM MENU, in which the user may set up system
information and perform review operation.
4
NIBP：Press it to inflate the cuff to start a blood pressure measurement. When measuring, press it to
cancel the measurement and deflate the cuff.
5
REC/STOP：Press it to start a real time recording. The recording time can be set in "RT REC TIME"
item under "RECORD" menu.
6
SILENCE：Push this button to suspend the alarm (with 1 minute and 2 minutes selectable), and a
symbol appears in the alarm area. Push this button for more than 1 second to mute all kinds of
sounds (including alarm sound, heart beat, pulse tone, key sound). At the same time, a symbol
appears. Push this button again to restore all kinds of sounds and the symbol disappears from
the screen.
7
FREEZE：Freeze or unfreeze the waveform
8
MAIN：Whatever levels of menu the system is in, press the button and the system will always return
to the main screen.
9
Rotary knob
u Rotating: clockwise or counter-clockwise rotating to move the cursor
u Pressing: press the knob to execute certain operations, such as entering a menu or processing a
command.
10
ON/OFF
u ON: press this button to turn on the monitor
u OFF: in turning on state, keep pressing this button for 3 seconds can turn off the monitor.
11
Alarm indicator: indicating alarm level by different color and flicking frequency
12
handle

6
Side view
CMS7000
CMS8000
CMS9000
1
2
3
5
6
7
8
4
9
10
1
2
3
5
6
7
8
4
9
1
0
1
2
3
5
6
7
8
4
9
10

7
1
T1: Socket for channel 1 TEMP probe
2
SpO2: Socket for SpO2sensor
3
ECG: Socket for ECG cable
4
NIBP: Socket for NIBP cuff
5
T2: Socket for channel 2 TEMP probe
6
IBP/CO2: IBP or CO2interface
Note: [6] and [7] can not be connected to a function
at the same time; if connected, only the earlier
connection is recognized.
7
IBP/CO2: IBP or CO2interface
8
Option: reserved interface
9
Battery cover
10
Recorder
Rear view
CMS7000
CMS8000
1
2
3
4
2
4
3
1

8
CMS9000
1
Network interface: standard RJ45 interface, connecting with the central monitoring system of our
company by network cable
2
USB port: connecting with external memory devices
3
Equipotential grounding terminal: when the monitor is used together with other equipment, use a
cable to connect other equipment to the equipotential terminal of the monitor, which eliminates the
ground potential difference between the different devices to ensure safety.
4
AC power port. Fuse: T1.6AL250V
NOTE:
l Replacement of fuse: unplug the power cord, lightly open the fuse slot with a tool to replace the fuse.
l The network interface can only connect with the central monitoring system of our company to form a
network monitoring system.
1
2
3
4

9
2.4 Display
The monitor adopts high resolution color TFT LCD screen, which clearly displays all physiological parameters and
waveforms of the patient. The following figure is a standard interface in normal monitoring state.
1.Battery indicator
The battery works normally, the solid part represents battery level.
Battery is low, it needs to be charged immediately, and the monitor generates low battery alarm.
The monitor does not contain internal battery.
2.Technical alarm area
Displaying technical alarms and prompt messages, cycle display for multiple pieces of information.
3.Physiological alarm area
Displaying physiological alarms, cycle display for multiple pieces of information.
4.Parameter area
Consisting of several individual areas, displaying the measured value corresponding to each parameter
module. The name of an individual parameter is on the top left of its area.
5.Patient information area
"BED NO.": Bed number of patient under monitoring
"PAT TYPE": Patient type of the patient under monitoring
"SEX": Patient sex
"BLOOD": Patient blood type
6.Date and Time
Indicating current date and time, available to calibrated if necessary.
7
5
1
6
2
4
3

10
7.Waveform area
Mainly displaying the waveform of physiological parameters, the name of each waveform is on the top left.
ECG lead is selectable according to the demand. The filter mode is displayed at the top of screen. Gain of
each channel is displayed above its waveform, at the right side of the waveform, there is a scale of one
millivolt.
When a menu pops up in the interface, it always locates a fixed area in the middle of the waveform area,
which will cover parts of the waveform, while the waveform will appear after exit the menu.
The waveform is refreshed at a certain speed, the speed adjustment please refer to the setup of each
parameter.

11
Chapter 3 Installation
The portable monitor is designed to comply with relevant safety requirements of IEC 60601-1, IEC 60601-2-27 and
IEC 80601-2-30 for medical electrical equipment. The system has a floating input for defibrillation proof and
electrosurgical knife protection. If the correct electrodes (see the section about ECG Monitoring) are used and placed
according to the manufacturer's instructions, the display will be restored within 5 seconds after defibrillation.
WARNING
l If any sign of damage to the monitor function is detected, or an error message appears, do not use it on any
patient. Contact biomedical engineer in the hospital or our maintenance engineer immediately.
l All analog and digital equipment connected to this device must be certified by specified IEC standards (e.g.
IEC 60950 and IEC 60601-1), and all equipment shall comply with the requirements of IEC 60601-1-1 (valid
versions) for connection. The person who connects the additional equipment to the input/output port, is
responsible for the compliance with the IEC 60601-1-1 standard. If you have any questions, please contact
us.
l When this device is connected to other electrical equipment in order to achieve a specific function, if the
hazards of this combination can not be determined from the specifications of each equipment (for example,
the risk of electric shock due to the accumulation of leakage current), please contact our company or
experts in the hospital related this field to ensure that the necessary safety of all equipment in this
combination will not be damaged.
l Please use our designated bracket (optional). When installing the bracket, please avoid the screws to touch
the circuit board inside the machine.
NOTE:
l To ensure the monitor works normally, please read this chapter and the content about patient safety before
use, and follow the requirements for installation.
l If the monitor finds any fatal error during self-test, it will alarm.
l Keep the package and packing materials for possible future transportation or storage.
3.1 Open the Package and Check
Before opening the package, please check it carefully. If any damage is found, please contact the carrier immediately.
Open the package and take out the monitor and accessories carefully. Check the components according to the packing
list to see whether the device has any mechanical damage or any part is missing. If there is any problem, contact the our
company immediately.
WARNING
l The disposal of packaging materials should obey the local regulations or the hospital waste disposal system.
The packaging material must be keep out of the reach of children.
l The device may get biological contaminated during storage, transport or use. Please confirm that the

12
package is intact before use, especially the disposable accessories. If any damage is found, please don't put is
into use.
NOTE:
l Keep the package and packing materials for possible future transportation or storage.
3.2 Environmental requirement
Please obey the following instructions to ensure the safety of electrical installation. The environment for potable
monitor using shall properly away from vibration, dust, corrosive or flammable gas, extreme temperature or humidity
and so on. When it is installed in a cabinet, there should be enough space in front of the device for convenient operation.
When the door of the cabinet is opening, enough space at the back of the device should be guaranteed for convenient
maintenance. Allow at least 2 inches (5 cm) of space around the instrument to ensure air circulation.
WARNING
l The environment for use, storage and transport should meets the requirements described in this manual,
otherwise the specifications of this product stated in this manual may not be able to achieved, or even cause
damage to the device.
Make sure that the device is free from condensation during working, when it is carried from one room to another room,
condensation may appears. This is because it is exposed under humid air with different temperatures.
3.3 Install the Monitor
If everything goes well, please place the monitor on a flat surface or fix it on the wall. The installation of wall bracket
please refer to its instructions.
3.3.1 Place on a Flat Surface
Place the monitor on a flat surface. The surface should be away from vibration, dust or corrosive drugs.
3.4 Connect the Power Cables
Please use the power cord equipped for the monitor. Plug the power cord to the power port on the monitor, and another
end to a grounded three-core power socket.
If the monitor is equipped with an adopter, plug one end of the adopter to the power port on the monitor, and another
end to a grounded three-core power socket.
NOTE:
l Plug the power cord to the hospital outlet. If necessary, connect it with the equipotential ground wire.
l When the device is equipped with battery, it must be charged after transport or storage. If turn on the
device directly without connecting with AC power supply, it may not work normally due to lack of electricity.
The device can be charged after connecting with the AC power no matter it is turned on or not.
Ground
In order to protect patients and medical personnel, the enclosure of portable monitor must be grounded. Therefore, the