Glow Bricks Batmobile Tumbler Scarecrow Showdown Lego... User manual

Batmobile Tumbler:
Scarecrow Showdown
1

Take the black lighting part to replace the 2x2 tile with pin on the back
2

Turn around the car, assemble the 1x2 lighting plates as shown
3
Restore the removed parts from previous step and stable the wire

Move the lighting parts to the top, remove the shown parts to hide
the wires in between the studs
4
Assemble the 2pcs of lighting round plates after removing the round plates on that

Put the windshield back and stable the wire underneath it
Assemble the 1x4 lighting plate and two round plates next to the plate on the
shown position
5

Move the remain lights to the rear side, the wire can be stabled in here
Assemble the lighting round plates underneath the spoiler
The wire can be hidden in between the studs in middle
6

Put the tile back, try to make the wires invisible
Move the connectors to the bottom of the car from the side
7

Use the plates provided to stabilize the wire, then connect to the USB cable
To power by battery connect with the battery case
8

Or you can put the battery case inside the car then move the connectors to the bottom
through the space in red circle
Then connect with the connectors from the lights and stable the wires by the plates
provided
9