Glow Bricks Lego The Office 21336 User manual

The Office
1

Take the lighting part with fire be ready, then remove the tiles as shown
2

Then assemble the lighting flame inside the basket at the corner and the yellow
lighting round plate to the lamp, the wire in between two lights can be hidden by
the cabinet and the chair
3
Assemble the tan and white lighting tiles to replace the remove tiles
Beware of the direction, the lights of white tiles should be facing the main office side

The remain lighting round plates will be used to place on the lamp shown in red
circle, then in blue circle, move the 1x6 white tiles to fill up the corner
*Use the white 1x2 tile provided to fill up the right corner
4
Leave the connector for the other lighting part

Now take the other lighting part, start by assembling the green lighting tiles
Remove the green tiles on the side to let the wires go through
5

Now assemble the white lighting tiles and put the removed tiles back after that
Assemble the lighting round plates on the lamp as shown
6

The single led bulb will be used to put inside the photocopier, start by detaching
the photocopy machine as shown
Clip the led bulb below the clear window, then restore the machine to stable the bulb
inside the machine
7

Assemble the last lighting round plate to the lamp
At last, connect the plugs then you can power up the lighting set by the USB cable
8