Glow Bricks Lego LandRover Classic Defender 90 10317 User manual

1

2
Start assembling the light for the front by the shown lighting parts

3
Replace the tiles with studs on both of the front lights by the
lighting parts, please assemble it exactly same position as the
picture
Detach the bumper, front lights and the parts as shown

4
Before restoring the front lights, insert the connector into the
shown spot, then the connector will be placed besides the tire

5
Now restore the parts in between the lights
Then restore the front lights back to the car
And make sure the wire in between them are placed in between
the studs in middle

6
Replace the 1x2 black plates on the bumper by the remain
lighting plates
Put the clear parts back on the lights bulbs

7
After all, restore the clear tiles on the bumper and put the bumper
back, this part would be finished

8
Replace the clear red and orange round plates by the lighting
parts, remember to follow the original colors
Now remove the shown parts of the car to assemble the lights for
rear side

9
Assemble the lighting round plates on the left side
Again put the round tiles back on the lights
Restore the LandRover tag to cover as many wires as you can, put
the removed round tiles on the lights then move the rest lights in
the car

10
Place the wire in between the studs to prevent getting damaged when
restoring the white parts removed from last step
Assemble the 1x4 lighting plate as shown, detach the shown parts to make
space for moving the black lighting plates to the top