Glow Bricks Lego The Haunted Mansion 40521 User manual

1

2
Firstly, split the shown parts at the front

3
Restore the removed parts from the previous step
Then remove the shown parts
Assemble the 2pcs of 1x4 lighting plates and place the remain lights
pass the corner

4
Assemble the 2pcs of 1x2 lighting plates
Remove the roof and the shown parts, pass the cable through
the wall then restore the white wall

5
Now take the shown part aside and assemble by the remain
lighting part
Put the bulb inside the balloon then close it

6
Restore the lamp and assemble the lighting fires on both sides
Take the lamp out and assemble the clear lighting round plates on
it

7
At last, put the roof back and connect the USB cable then you
can light it up
Pull it back to the house and assemble the remain lighting fire at
downstair