Glow Bricks McLaren Forumla 1 Race Car Lego 42141 User manual

McLaren Forumla 1
Race Car
1

Take the shown lighting part and start assembling from the rear
2

Assemble the brake light then stick the two short lighting tiles at the
rear spoiler
3
Remove the clear red tile from the model and place it on the lighting part

Then assemble the remain four lighting tiles at the bottom of the car
4
Now for the other lighting parts

Start from the lighting liftarms, turn upside down the car and assemble them as shown
For the 1x2 lighting tile follow by the liftarm, assemble it at the middle as shown
5

Move the lights on the side, remove the shown parts
Stick the four lighting tiles at the following position
6

Pull the black 1x2 lighting plate to the pilot seat area
Then assemble it at the red circle place
7

In the red circle area there’s a hole, you may pass the rest of lighting parts through
the hole to the other side
Then stick the lights, just like the same way as the other side
8

To light it up, you can power by USB or battery
9