Good Way Hi-Flo CC-400HF User manual

CC-400HF Quick
Start Guide
PLEASE REVIEW
IMPORTANT SAFETY
INSTRUCTIONS
LOCATED IN
OPERATORS MANUAL

Proper Startup
Essentials
Attach the high-pressure hose to the quick
connect on the output of the pump.
Replace the red cap with the black cap
21

Plug the 3-prong GCFI
plug in to an outlet and
press reset to ensure
its functioning.
Pull the trigger of the gun
to allow the water to ow.
While holding the trigger, turn on the machine
and allow it to run water for 20-30 seconds.
(Note: do not attach any of the additional nozzles
to the gun during this step).
Attach the water
supply hose to the
water inlet on the
output of the pump
and turn the water on.
4 5
6 7
8
Let go of the trigger and put the
soap dip tube into your container
of COILSHINE Chemical.
Attach the spray gun to
the quick connect of the
high-pressure hose.
3

GOODWAY®TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: [phone] · Toll-Free Tel: [phone]
Fax: [phone] · Toll-Free Fax: [phone]
Email: [e-mail]
Visit: www.goodway.com
HVAC & FACILITY MAINTENANCE SOLUTIONS
REV1 1123
Attach either the black
nozzle or wonder-wand
to the spray gun’s quick
connect to siphon and
apply soap.
Attach the
yellow nozzle to
the spray gun’s
quick connect
to rinse.
(Note: You can
use the wonder-
wand to rinse
but you must
remove the dip
tube from the
COILSHINE
chemical).
9
10