Häfele Verso 372.68 Series User manual

Lift-up Fittings – Verso and Strato
Item No.: 372.68 Series and 372.67 Series
Mounting Instructions
Verso
Strato

2
Foreword
By choosing the verso/strato lift-up fitting, you have opted for a fitting solution that is technically very advanced and
mechanically very efficient. Your verso/strato lift-up fitting is manufactured with extreme care and precision and goes
through numerous quality and safety checks in order to ensure that it operates smoothly and safely.
1. IMPORTANT SAFETY NOTICE
Installation must be carried out in accordance with the assembly instructions; otherwise there is a risk of
injury.
2. The present verso/strato lift-up fitting is only suitable for the intended use as a lid support for living room, bath,
kitchen and office furniture according to the weight printed on the fitting. The manufacturer is not responsible for
any losses or damage resulting from other uses.
3. The observance of the assembly instructions as prescribed by the manufacturer also form part of the agreed use.
4. Also take into account the general legal and miscellaneous regulations and legal provisions that are applicable – even
those that apply in the operator’s country – as well as the applicable environmental protection regulations. The regula-
tions of the trade associations or other supervisory authorities that are in force locally must always be observed.
5. The manufacturer cannot be held responsible for any losses or damage resulting from unauthorised modifications to
the verso/strato lift-up fitting.
IMPORTANT SAFETY NOTICE
The metal frame and the used gas suspension resp. damping elements of the fixture must not be opened under any
circumstances, as the internal components are under a lot of tension and there is a risk of injury.
Provided the above guidelines are adhered to, you will enjoy many years of satisfaction from your verso/strato lift-up fitting.
For any further questions please do not hesitate to contact us.

3
huwilift-
strato
verso
ca. 15
ca. 15
572.ac
.
ac 0
8
3
61
552
33.
n
im
ca. 15
ca. 55
ca. 40
ca. 15
13.5 +0.5
40
232323
ca. 40
ca. 65
ca. 95
ca. 120
ca. 145
.
a
c5
5
2
.
a
c082
.ac 5
23
.
ac5
6
3
.
a
c014
.
a
c054
.
a
c594
.
a
c335
.ac575
4
97
447
496
446
495
4
45
494
444
4
14
0
0
8
–0
2
4
min. 138
ca. 110
View of right side. (left side symmetrical)
1Overview on construction sizes for lift-up fitting – verso
Cabinet height 420 - 800 mm

4
strato
W
61
13.5 +0.5
40
23
23
23
82
33.ni
m
YX
D
H
R
U
T
[ mm ]
420
420 - 500
450
420
500
550
500
550
255
255
255
293.5
293.5
313.5
380
380
380
420
420
440
395
395
395
450
450
480
35
5
85
80
30
50
444
414
494
544
494
544
265
265
265
342
342 - 420
350
342
420
186
186
186
308
308
308
295
295
295
36
28
98
346
338
408
200
200
200
295
295
315
600 313.5 440 480100594315
650 313.5 440 480150644315
37
37
37
50
50
50
37
37
37
37
37
138
138
138
151
151
151
138
138
138
138
138
XYDH
ca.
R
ca.
TU
ca.
VW
min.
500
500 - 550
600
550 - 650
[ mm ]
mm
40
72
168
32
23
69
V
View of right side. (left side symmetrical)
2Overview on construction sizes lift-up fitting – strato
Cabinet height 342 - 650 mm

5
strato
verso
40
72
168
V32
23
69
A
W
Schrankhöhe
Cabinet height
Hauteur de meuble
Altezza armadio
Altura del mueble
[ mm ]
VW
min.
420 - 800 37 mm 138 mm
50 mm 151 mm
37 mm 138 mm
342 - 420
420 - 650
huwilift-
verso
huwilift-
strato
Drilled holes
A= Ø 5 mm x min. X deep
5
Ø
16
12
5
Ø
19
15
Design for all cabinet heights
View of right inner side. (left side symmetrical)
Drilling depth
3Drill holes for fitting in accordance with
the drilling diagram. Lift-up fitting verso/strato

6
huwilift-
strato
verso
*A
Drilling diagram for
reverse side of flap
B*
C
B*
552
008-024
552
232323
232323
13,5 13,5
A* and B* = observe overlay !
C = Drilling depth
5Ø
16
12
5
Ø
19
15
*A
B*
Design for particle board and MDF board. Cabinet height 420-800 mm
4Drill holes for flap according to the
drilling diagram.

7
huwilift-
strato
verso
*A
552 552
008-024
232323
232323
8
Ø3.2 (M4)
Drilling diagram for
reverse side of flap
*A
A* = observe overlay!
5Drill holes for flap according to the
drilling diagram.
Design for 20 mm aluminum profile.

8
strato
*A
B* B*
13.5 13.5
C
Y
X
232323
Y
232323
Drilling diagram for
reverse side of flap
XY
420 – 500 mm
500 – 550 mm
550 – 650 mm
255 mm
342 – 420 mm 186 mm
293.5 mm
313.5 mm
5
Ø
16
12
5
Ø
19
15
Design for particle board and MDF board.
*A
B*
A* and B* = observe overlay!
C = Drilling depth
6Drill holes for flap according to the
drilling diagram. Lift-up fitting – strato

9
strato
A* = observe overlay ! XY
420 – 500 mm
500 – 550 mm
550 – 650 mm
255 mm
342 – 420 mm 186 mm
293.5 mm
313.5 mm
*A
232323
232323
8
Y Y
X
Ø3.2 (M4)
Drilling diagram for
reverse side of flap
Design for 20 mm aluminum frame profile.
Cabinet height 420-650 mm
*A
Drill holes for flap in according to the
drilling diagram. Lift-up fitting – strato
7

10
strato
verso
Fixing set for fixation brackets
( Not included in Set, to be ordered separately! )
Left and right side on flap.
Design for particle board and MDF board. Design for aluminum frame profile.
8Screw on fixation brackets.