Hearth & Home LOGS-OLY User manual

1
LOG PLACEMENT
INSTRUCTIONS
CAUTION: Logsarefragile!Carefullyremovethelogsfrom
thepackaging.
780-935C 12/03
LOG #2 (SRV780-702): Place log #2 on the grate as
shown. The cutouts on the bottom of the log should line up
with the two left grate tines. Push the log all the way to the
back of the unit.
LOG #4 (SRV780-704): Place log #4 on the grate as
shown. The cutouts on the bottom of the log should line up
with the grate tines. Pull the log all the way forward on the
grate.
LogAssembly: LOGS-OLY
Model: Olympus
4
5
6
7
1
2
31
23
LOG #1 (SRV780-701): Place log #1 on the grateas
shown. The cutouts on the bottom of the log should line up
withthe two right grate tines. Push the log allthe way to the
backoftheunit.NOTE: Logs#1&#2looksimilarbutcanbe
easily identified by the direction of the cutouts along the
bottom of both logs.
LOG #3 (SRV780-703): Place log #3 on the grate as
shown. The cutouts on the bottom of the log should line up
with the grate tines. Pull the log all the way forward on the
grate.
8
9
45
LOG#5 (SRV780-705): Placelog#5onthegratebehind
logs#3and#4andinfrontof theburnertubes1/4inch forward
from tubes. The cutouts on the bottom of the log should line
up with the center grate tines.
121
3
213
214

2
FLAT SPOTS
LOG #6 (SRV780-706): Place log #6 on the flat spots of logs #2 and #3. Push the log to the back of the unit.
6
FLAT SPOTS
7
LOG #7 (SRV780-707): Place log #7 on the flat spots of logs #1 and #4 as shown.
LOG #8 (SRV780-708): Place log #8 on the flat spots of logs #2, #4 and #5 as shown.
FLAT SPOTS
8
FLAT SPOTS
FLAT SPOTS
FLAT SPOTS
FLAT SPOTS
5
3
214
65
3
214
7
65
3
214
2
3
1
4
2
4
5

3
LOG #9 (SRV780-709): Place log #9 on the flat spots of logs #3 and #8 as shown.
9
FLAT SPOTS
87
65
3
214
FLAT SPOTS
8
3