Hyco AVG600T Specification sheet

Product Instruction Manual
Avignon
AVG600T, AVG900T, AVG1500T, AVG1800T
Aluminium radiator
Version 3.2 Jan 2015
V18.3/2

Co te ts
1. Important safety points
2. Installation
•1. Wall mounting
•2. Electrical
3. Operation
•3.1 Panel controls
•3.2 LCD Display
•3.3 Turning on the radiator
•3.4 Unlocking the radiator
•3.5 Setting the time and date
•3.6 Free operating mode
•3.7 Timer Mode
•3.8 Programming your radiator
•3.9 Program mode
•3.10 Default temperature settings
•3.11 Daily settings P1-P9
•3.12 Fine tuning P1-P9
•3.13 Weekly program schedule
•3.14 The 9 pre-set programs
•3.15 Open Window Function
4. Maintenance
5. Specifications
6. Guarantee and service policy
2

Thank you for purchasing a Hyco Avignon electric radiator. The Avignon
electric radiator is a stylish, modern fixed heating solution that is ideal for
application in both home and office environments. Available in 4 power
outputs, this range features a slim line design and uses advanced
technology to provide comfort and efficiency across a variety of
applications. Please read and understand these instructions before
commencing installation, and leave them with the user when installation
is complete.
1. Importa t safety poi ts
The Electrical installation must be carried out by a qualified electrician in
accordance with the current edition of the I.E.E. Wiring Regulations.
Only connect the unit to a single phase supply with a mains voltage
as specified on the rating plate.
The supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service
agent for replacement.
Do not carry the appliance by the power cord.
Do not let the power cord hang over the appliance.
The heater must not be located immediately below or above an electrical
socket outlet.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children of less than 3 years should be kept away unless continuously supervised.
3

Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided that it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
Only use the mounting bracket supplied and do not modify the bracket.
In order to avoid overheating, do not cover the heater.
Fixed heaters likely to be used in bathrooms are to be installed so that switches
and other controls cannot be touched by a person in the bath or shower.
2. I stallatio
Wall Mou ti g
The heater must not be located immediately below or above an electrical
socket outlet.
Only use the mounting bracket supplied and do not modify the bracket.
Fixed heaters likely to be used in bathrooms are to be installed so that switches
and other controls cannot be touched by a person in the bath or shower.
Choose a suitable location for the mounting
of the heater ensuring that the surface
will be strong enough to hold the weight
of the product. Ensure that the minimum
mounting distances are adhered to as
per the diagram right:
300mm
300mm
300mm
100mm
4

•Hold the bracket up against the mounting surface, ensuring it is the correct way up
(Fig 1) and mark the holes through the bracket onto the surface of the mounting wall.
Drill holes using an 8mm drill bit (Fig1 and 2)
•Insert the plastic wall plugs and fasten the bracket onto the wall using the screws
provided (Fig 3)
•Ensure that the plastic mounting brackets are fitted to the back of the radiator
as shown
•Offer up the radiator to the bottom of the bracket and then push the top of the
radiator forwards. Slot the top of the bracket into the plastic bracket on the back
of the unit (Fig 4). Secure in place using the fixings provided and verify heater is
securely fixed to the wall.
5

Electrical
The Electrical installation must be carried out by a qualified electrician
in accordance with the current edition of the I.E.E. Wiring Regulations.
Only connect the unit to a single phase supply with a mains voltage
as specified on the rating plate.
If the heater is to be connected to the fixed wiring of the property then
installation must include a double pole isolating switch with a break
contact distance of at least 3mm.
The power cord should be connected following the colour coding below:
Brown: L
Blue: N
Green / yellow: E
A (Top hole of hanging)
1. 2.
3. 4.
B (Bottom
hole of hanging)
Drill
hole
Drill
hole
Bottom
level line
of hanging
6

3. Operatio
3.1 Panel controls
ON/Off Time, day and temperature settings
Mode selection and programs Increase selected criteria
Decrease selected criteria
3.2 LCD Display
1. Hour 6. Eco mode 11. Select program
2. Day 7. Frost mode 12. Timer
3. Program number 8. Sleep mode 13. 24 hour display
4. Programmed temperature 9. Radiator lock 14. Time scale
5. Comfort mode 10. Heating on
3.3 Turnin on the radiator
1. Switch power supply on to unit
2. Turn the radiator on using the switch on the underside of the appliance
where the power cable enters the radiator
3. Briefly press the on/off button until the on/off icon on the display panel
disappears – you are now in Free Operating Mode.
3.4 Unlockin the radiator
1. The radiator will automatically lock if left unattended for 30 seconds.
2. To unlock the radiator at any time (a key icon will be visible in the middle-left
pane of the display) press the up and down arrows at the same time.
3.5 Settin the time and date
1. In Free Operating Mode, press C/M
2. The time digits in the top left of the display will start to flash.
3. Use the up and down arrows to select the desired hour.
4. Press C/M again to cycle through the minutes and repeat the process.
7

5. Press C/M again to cycle through the day settings – these are under the time and
Monday to Sunday are represented as 1-7.
6. Press C/M again to confirm.
Please note: If during this process no button is pressed within 5 seconds, the process will be
automatically restarted.
3.6 Free Operatin Mode
Free operating mode is the simplest way to get started with your radiator and allows you to
set a temperature that is controlled by the thermostat.
1. Press and hold on/off until the on/off icon disappears from under the clock part
of the display.
2. FR will appear in the middle of the display.
3. Use the up and down arrows to select the desired temperature.
3.7 Timer Mode
Timer Mode is convenient if you want to control your energy usage or program the radiator
to shut itself off after a certain amount of time (programmable in increments of 30 minutes).
1. Press and hold C/M until the clock icon appears in the middle of the display.
2. Once the clock appears, use the up and down arrows to select the amount of time
you would like the radiator to stay on for. After the display has stopped flashing,
a clock icon will appear.
3. The radiator will switch off when the counter reaches zero.
4. To exit or configure Timer Mode, press and hold C/M for 3 seconds.
Please note: The radiator may first need to be unlocked (See ‘Unlocking the radiator’).
3.8 Pro rammin your radiator
The heater can be programmed to work on a daily or weekly cycle of heating to suit your
needs. There are two main heat settings: comfort (Sun icon) and Eco (Moon icon). The default
factory settings are 22°C for Comfort mode and 17°C for Eco mode. There is a third default
setting, Frost Watch (ice icon), which keeps the temperature at 7°C. It is possible to change
these settings (except for the Frost Watch) to suit your comfort needs.
3.9 Enterin Pro ram Mode
1. Briefly press P/Prog.
2. The middle panel of the display will flash after an audible beep.
3. The up and down arrows can now be used to cycle through the available programs
P1-9 or AU.
Please note: The radiator may first need to be unlocked (See ‘Unlocking the radiator’).
8

3.10 Chan in the default temperature settin s in pro ram mode
1. In Program Mode, press and hold C/M until the radiator beeps, the temperature
indicator will now be flashing with the Sun icon highlighted.
2. Use the up and down arrows to select the desired temperature setting for Comfort
Mode.
3. When complete, press C/M button to cycle through to Eco Mode and again use the
up and down arrows to select the desired temperature.
4. The selected temperatures will now be used when programming the radiator.
3.11 Pre-set pro rams P1-P9
The radiator can be programmed to provide a customised 24-hour heating schedule. To keep
things simple, the radiator comes with 9 pre-set programs to choose from (see “The 9 pre-set
programs”). The time is indicated on the display in hourly increments, from midnight to
midnight. A full bar represents an hour of Comfort Mode and a half bar represents an hour
of Eco Mode. A flashing bar indicates the present hour. The pre-set programs are provided
to make things easier for you. However, these programs are 100% customisable.
3.12 Fine tunin P1-P9
1. Select the program you wish to alter as above in “Entering Program Mode”.
2. Once in the desired program, press and hold P/Prog.
3. The 24-hour clock display will now be flashing in the 00:00 position. You can now use
the up and down arrows to cycle through the time on the hour bar. In each position
for the 24-hour period, the C/M button can be used to select either Comfort Mode
or Eco Mode.
3.13 Weekly pro ram schedule
The weekly program schedule allows you to program the radiator, taking into account any
differences in your weekday and weekend habits.
1. Press P/Prog for 3 seconds to access the program menu.
2. Select AU.
3. Press and hold P/Prog until you hear a beep.
4. The number 1 (indicating Monday) should be visible in the middle box on the
left-hand side of the display.
5. The up and down arrows can be used to scroll through the pre-set programs from
P1-P9. When the desired program has been selected, press C/M to cycle through
to Tuesday (2). Repeat until you have a schedule for the whole week.
9

3.14 The 9 pre-set pro rams
3.15 Open Window Function
Your radiator has an Open Window function. If you open a window widely in the space where
the radiator is located, a sensor will detect the sharp drop in temperature. The radiator will
respond by switching off automatically and displaying the symbol “FO” on the screen. The
radiator will switch itself back on after 10 minutes. If, however, you wish to switch it back
on before the 10 minutes have passed, you can simply press the radiators “ON” button.
The symbol “FO” disappears from the display.
Activatin the Open Window Function:
1. Press P/Prog once. Using the up and down arrows,
select FO from the list of abbreviations and press
P/Prog once to confirm your choice.
2. Once in the Open Window program, the following
screen appears:
The symbol OF indicates “function not in operation”.
Using the up and down arrows, change the OF into ON,
(ON meaning “function is in operation”).
The Open Window function is now selected.
To confirm your selection, press P/Prog once. If you do not
press the P/Prog button, the activation of the function will
be confirmed automatically after 5 seconds.
P1:
P3:
P5:
P7:
P2:
P4:
P6:
P8:
P9:
10

4. Mai te a ce
•Before cleaning, ensure the heater is disconnected from the mains supply and has
completely cooled
•Wipe the exterior surfaces with a soft dry cloth
•Never use chemical or abrasive cleaners
Clean the radiator at least once a year with a vacuum cleaner to remove any accumulated dust.
5. Specificatio s
Model AVG600T AVG900T AVG1500T AVG1800T
Voltage 230V~50Hz
Power 0.6kW 0.9kW 1.5kW 1.8kW
Weight 45910
Dimensions 575 x 480 x 80 575 x 560 x 80 575 x 880 x 80 575 x 960 x 80
D
H
W
11

Model identifier(s): AVG600T
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters (select one)
Nominal heat output Pnom 0.6 kW manual heat charge control with
integrated thermostat
No
Minimal heat output
(indicative) Pmin 0.6 kW
manual heat charge control with
room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
Pmax,
c 0.6 kW
electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity consumption fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW single stage heat output and no room temperature control
No
In standby mode elSB 0.001 kW two or more manual stages, no
room temperature control
No
with mechanic thermostat room
temperature control
Yes
with electronic thermostat room
temperature control
No
electronic room temperature
control plus day timer
No
electronic room temperature
control plus week timer
Yes
Other control options (multiple selections
possible)
room temperature control, with
presence detection
No
room temperature control, with
open window detection
Yes
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
Contact details: Hyco Manufacturing Ltd, Castleford WF10 5NR www.hyco.co.uk
12

Model identifier(s): AVG900T
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters (select one)
Nominal heat output Pnom 0.9 kW manual heat charge control with
integrated thermostat
No
Minimal heat output
(indicative) Pmin 0.9 kW
manual heat charge control with
room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
Pmax,
c 0.9 kW
electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity consumption fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW single stage heat output and no room temperature control
No
In standby mode elSB 0.001 kW two or more manual stages, no
room temperature control
No
with mechanic thermostat room
temperature control
Yes
with electronic thermostat room
temperature control
No
electronic room temperature
control plus day timer
No
electronic room temperature
control plus week timer
Yes
Other control options (multiple selections
possible)
room temperature control, with
presence detection
No
room temperature control, with
open window detection
Yes
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
Contact details: Hyco Manufacturing Ltd, Castleford WF10 5NR www.hyco.co.uk
13

Model identifier(s): AVG1500T
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters (select one)
Nominal heat output Pnom 1.5 kW manual heat charge control with
integrated thermostat
No
Minimal heat output
(indicative) Pmin 1.5 kW
manual heat charge control with
room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
Pmax,
c 1.5 kW
electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity consumption fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW single stage heat output and no room temperature control
No
In standby mode elSB 0.001 kW two or more manual stages, no
room temperature control
No
with mechanic thermostat room
temperature control
Yes
with electronic thermostat room
temperature control
No
electronic room temperature
control plus day timer
No
electronic room temperature
control plus week timer
Yes
Other control options (multiple selections
possible)
room temperature control, with
presence detection
No
room temperature control, with
open window detection
Yes
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
Contact details: Hyco Manufacturing Ltd, Castleford WF10 5NR www.hyco.co.uk
14

Model identifier(s): AVG1800T
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters (select one)
Nominal heat output Pnom 1.8 kW manual heat charge control with
integrated thermostat
No
Minimal heat output
(indicative) Pmin 1.8 kW
manual heat charge control with
room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
Pmax,
c 1.8 kW
electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity consumption fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW single stage heat output and no room temperature control
No
In standby mode elSB 0.001 kW two or more manual stages, no
room temperature control
No
with mechanic thermostat room
temperature control
Yes
with electronic thermostat room
temperature control
No
electronic room temperature
control plus day timer
No
electronic room temperature
control plus week timer
Yes
Other control options (multiple selections
possible)
room temperature control, with
presence detection
No
room temperature control, with
open window detection
Yes
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
Contact details: Hyco Manufacturing Ltd, Castleford WF10 5NR www.hyco.co.uk
15

hyco.co.uk
Hyco Manufacturing Ltd
Normandy Court
Express Way
Castleford, WF10 5NR
T 01924 225 200
F 01924 225 210
E [email protected]
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2012/19/EU.
At the end of its working life this equipment must not be disposed of as household
waste. It must be taken to a local authority waste collection centre or to a dealer
providing this service. Disposing of electrical and electronic equipment separately
enables its components to be recovered and recycled to obtain significant savings in
energy and resources. In order to underline the duty to dispose of this equipment
separately, the product is marked with a crossed out dustbin.
6. Guara tee a d service policy
This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.