Hyco Scirocco SC2000Y Specification sheet

Product Instruction anual
Scirocco
SC2000Y, SC2000YM, SC2000YMT
Convector heater
This product is only suitable for well insulated spaces
or occasional use
V18.3,5

2
Thank you for purchasing the Scirocco convector heater. The SC2000Y
and SC2000Y standard convectors come complete with thermostat and
three heat settings; the SC2000YT model also includes a 24hr timer. The
Scirocco convector heater is ideal for portable heating applications in the
home and office environment. Please read and understand these
instructions before commencing assembly and use, and leave them with
the user when assembly is complete.
1. Im ortant safety oints
Only connect the unit to a single-phase supply with a mains voltage as specified
on the rating plate.
Do not carry the appliance by the supply cord.
The supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service agent
for replacement.
Always keep the outlet and inlet grilles clean.
Do not cover the inlet or outlet as it may cause overheating.
Children of less than 3 years should be kept away unless continuously
supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
concerning use of the appliance in safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
Do not use this heater in the immediate surroundings of a bath, a shower or
a swimming pool.

3
2. Installation
Do not use the heater on a carpet with a deep pile.
Do not locate beneath a shelf or similar protrusion.
Do not position near any combustible materials, curtains or other furnishings.
The supplied feet must be fitted prior to operation.
Assembly
•Holes are provided at the base of the heater.
Select the two holes (on opposite corners)
as shown in the diagram.
•Align the holes in the feet with those on the
base of the heater and attach using the small
self-tapping screws provided.

3. Electrical connection
This heater is intended solely as a portable appliance; only operate using the power
cord and 13 amp plug supplied.
If the plug needs changing, make the connections as:
•Brown / Red: L
•Blue / Black: N
•Green / Yellow: E
4. O eration
Ensure the supply cable is fully uncoiled when in use.
Ensure the supply cable is not in contact with the main body of the heater during
operation as it may become very hot.
•To turn on the appliance, select the desired power setting.
1 = 750W
2 = 1250W
1&2 = 2000W
•Turn the thermostat to max (fully clockwise). When
the room reaches the desired comfort level, adjust
the thermostat down (anti-clockwise) until a click is
heard and the lights on the power switches turn off.
The heater will now maintain the current
temperature. Due to the mechanical nature of the
thermostat, temperature levels may vary by a few
degrees on each heating cycle.
•It is advised the lowest adequate heat setting is
selected to maintain the desired level of comfort.
4
1
2
3

Timer feature – SC2000YMT model only
•To set the current time on the 24hr segment timer, twist the outer ring until the
pointer is aligned with the correct time.
•If the heater is unplugged the timer will stop keeping time and it must be set again.
•The slide switch on the timer offers three settings:
I = On permanently (non-timed).
Clock = Timer regulated operation.
O = Off permanently (non-timed).
•To set the times of operation, pull out each segment for ON or push back in for OFF.
Each segment represents 15 minute slots.
5. Maintenance
Always isolate the appliance from the power supply prior to the commencement
of any maintenance.
Do not use abrasive chemicals or materials.
•Clean the exterior with a damp cloth.
•Remove debris from the inlet and outlet at regular intervals using a soft brush
or vacuum cleaner.
5
1
24
23
22
21
20
19
18
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
19
Slide Switch
Segment
Pointer

6. S ecifications
Voltage 230v~50Hz
Power 750-2000W
Model Height (mm) Width(mm) Depth(mm) Weight(kg)
SC2000Y 420 580 200 3.0
SC2000YM 385530 200 2.5
SC2000YMT 385530 200 2.5
6
D
W
H

7. Guarantee and service olicy
This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.
7
Model identifier(s): SC2000Y, SC2000YM, SC2000YMT
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters (select one)
Nominal heat output Pnom 2.0 kW manual heat charge control with
integrated thermostat
No
Minimal heat output
(indicative) Pmin 0.75 kW
manual heat charge control with
room and/or outdoor
temperature feedback
No
Maximum continuous
heat output
Pmax,
c 2.0 kW
electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity consumption fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW single stage heat output and no room temperature control
No
In standby mode elSB 0 kW two or more manual stages, no
room temperature control
No
with mechanic thermostat room
temperature control
Yes
with electronic thermostat room
temperature control
No
electronic room temperature
control plus day timer
No
electronic room temperature
control plus week timer
No
Other control options (multiple selections
possible)
room temperature control, with
presence detection
No
room temperature control, with
open window detection
No
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
Contact details: Hyco Manufacturing Ltd, Castleford WF10 5NR www.hyco.co.uk

hyco.co.uk
Hyco anufacturing Ltd
Normandy Court
Express Way
Castleford, WF10 5NR
T 01924 225 200
F 01924 225 210
E [email protected]
INFOR ATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2012/19/EU.
At the end of its working life this equipment must not be disposed of as household
waste. It must be taken to a local authority waste collection centre or to a dealer
providing this service. Disposing of electrical and electronic equipment separately
enables its components to be recovered and recycled to obtain significant savings in
energy and resources. In order to underline the duty to dispose of this equipment
separately, the product is marked with a crossed out dustbin.