Light Sky AQUAPEARL-PRO User manual

Please read these user manual carefully before use!
AQUAPEARL-PRO
E-mail:
n
Address: No. 43, Yunfeng Road, Xiuquan Street,
Huadu District, Guangzhou, China

Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.
Contents
1. Safety information....................................................................................................................2
2. Technical information...............................................................................................................4
3. Attachment and body size.......................................................................................................6
4. Installation and connecting.....................................................................................................7
5. Control panel..........................................................................................................................10
6. Menu setting...........................................................................................................................11
7. Channel function.....................................................................................................................16
8. Circuit connecting diagram...................................................................................................28
9. Cleaning and maintenances...................................................................................................29
10.Troubeshooting......................................................................................................................30
11.Duty exonerative and copyright protection............................................................31

2
S A F E T Y I N F O R M AT I O N
■ Connection to mains supply
The double insulation between the LV power supply and the control conductor on the fixture.
■This lighting fixture is for professional use only - it is not for household use.
■ Installtion
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be prgperly hooked onto the fitting and secured to the framework.
When suspending the fixture, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all the devices they support.
Ensure a minimum clearance of 0.5m around the cooling fans and ventilation.
Please do not install the fixture onto combustible surface.
Do not expose the front glass to sunlight or other strong light source from any angle.
Lenses can focus the sun's rays inside the fixture, creating a potential fire hazard.
■ Mounting surface and fire protection
Keep all combustible materials at least 1 m away from the fixture.
■ Protection against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I
appliance according to standard EN 60598-1).
It is,moreover, recommended to protect the supply lines of the projectors from indirect
contact and/or shorting to earth by using appropriately sized residual current devices.
Connection to the electricity mains must be carried out by a qualified electrical installer.
Check that the mains frequency and voltage correspond to those for which the projector is designed
as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the maximum number
of fittings to connect to the electricity line, in order to avoid overloading.
Don’t use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person to change the damaged power
cable in order to avoid any dangerous.
ta 40℃
■ Maximum ambient temperature
This fixture is suitable for indoor use and wet locations. Do not immerse in water.
The ambient temperature Ta: 20℃ 40℃.- ～

The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
Never look directly into the light source. You risk injury to your retina, which may induce blindness.
Do not look at LEDs with magnifiers, telescopes, binoculars or similar optical instruments that may
concentrate the light output.
Protection optical radiation
Protection against explosion
The protection screen, lens or ultraviolet screen on the lamp can be damaged to the degree
of failure if visible damage, such as a crack or deep mark, should be replaced。
3
tc 80℃ The maximun temperature that can be reached on the external surface of the fitting,
in a thermally steady state,is 80℃ 。
Avoid contact bypersons and materials.
Allow the fixture to cool for at least 5 minutes before handling.
In the event of a serious operating problem, stop using the fixture.
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact your
nearest dealer.
Before starting any maintenance work or cleaning the fixture,cut off power from the
mains supply.
Execution standard: product execution gb7000.1-2015, gb7000.217-2008 standard.

4
T E C H N I C A L I N F O R M ATI O N
● Power supplies available：
100V~240V~ 50/60Hz
● Power：
800W，PF0.985
●Light Source：
OSRAM 40W，RGBW 4 in 1 LED chip.
●LED QTY：19PCS.
● Average life：30000h
● Lens & Zoom：
High precision combination lens,linear adjustment.
●Zoom angle：4.5°～60°.
●Color：RGBW macro color system.
●CCT：
Color temperature adjustable range: 2500～10000K
●Pixel control, outstanding color macro effect.
●Lens rotation：
Rotating front lens for countless vortex effects, for
aerial or "kaleidoscopic" projection use.
●Luminous ring：
The front luminous circle can be controlled by single
point, and the flow color change effect can be pursued
at will.
●Strobe：
1-30 times/ second electronic strobe and random
strobe.
●Dimmer/Shutter：
Electronic dimmer，provides four dimming options；
various strobe effect.
● Pan、Tilt：
X/Y Travel：540°/218°
X/Y Resolution：2.11°/0.85°
X/Y Speed：2.5S/1.2S
●Control Mode ：
DMX512, RDM, Stand-alone mode , ArtNet,
Wireless DMX512(optional).
● ：Channel
Standard-1(26CH)、Mode-2(45CH)、Mode-3(98CH)、
Mode-4(79CH)、Mode-5(22CH)、Mode-6(16CH)、
Mode-7(39CH)、Mode-8(35CH).
● ：Display Menu
- The display panel adopts a 1.91-inch OLED screen,
which is used in both Chinese and English languages
to facilitate quick operation and browse menus.
- Display board can record device’s using time , show
device’s temperature, channel data and software version .
-Menu can be edited or called built-in the program.
● ：IP set
Automatic chang battery,IP could be set without
electricity.
● ： Software upgrade
Update via DMX link Channel.
● ：IP66protection
● ：Safety Devices
-BIPOlar circuit breaker with thermal protection.
● Cooling：
Forced ventilation with axial
fans.
● Outlooking：
adopt ABS anti-fire plastic.
●Light size：470×333×563
● Box Size：530X395X635MM
N.W.：29.0kg ，G.W.：32.8kg
● Flycase Size (2 sets)：
925X580X785MM
N.W.： 58kg ，G.W.：101.8kg

5
Distance,spot diameter and illumination diagram
8
6
4
2
0
2
4
6
8
010(32'10")
1.35(4'5")
17.2(56'5")
15(49'2")
1.9(6'3")
25.8(84'8")
R
G
B
W
RGBW
60°Lux(fc) R
G
B
W
RGBW
4.5°Lux(fc)
Distance m(ft in)
5°Diameter m(ft in)
60°Diameter m(ft in)
5(16'5")
0.78(2'7")
8.6(28'3")
7(23')
1.08(3'7")
12(39'4")
4371(406)
8569(796.4)
2447(227.4)
13540(1259)
40039(3721)
168(15.6)
315(29.3)
98(9.1)
480(44.6)
938(87.2)
2600(241.6）
4668(433.8)
1364(126.8)
7357(638.7)
14069(1358)
95((9)
188(17.5)
56(5.2)
295(27.4)
557(51.8)
1574(146.3)
2276(211.5)
653(60.7)
3789(352.1)
7088(658.7)
551(51.2)
1009(93.8)
296(27.5)
1608(149.4)
3041(282.6)
53(4.92)
105(9.76)
36(3.35)
165(15.3)
306(28.4)
31.6(2.94)
56(5.2)
18(1.2）
92.4(8.6)
117.6(10.9)
4.5° 60°

power cord
6
ATTACHMENT AND BODY SIZE
47 0
56 3
440
33 3
47 0
333
323

Installing the projector- Fig. 3
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
7
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
When suspending the fixture, ensure that the supporting structure and all hardware used can
hold at least 10 times the weight of all the devices they support.
Compact,standard clamp system equipped & easy installation
INSTALLATION AND CONNECTING
Safety rope

● After doing the above operation and making sure all the devices had been
installed with natural operate, press the power switch to check whether every
-thing is working normally.
● connection to the eiectricty mains must be carried out by a qualified electrical
installer.
● The stage lighting power supply can not be more than 2pcs pre line
8
power in out out
in in power end
The N terminal is connected
with the blue line.
Ground
The L terminal is connected
with the brown line.
Watertight seal ring
Watertight seal ring

9
DMX512 in
signal end
out in out in
DMX - output
1 - Shield
2 - Signal (-)
- Signal (+)
- Not connected
- Not connected
3
1
2
3
DMX-input
- Shield
- Signal (-)
- Signal (+)
- Not connected
- Not connected
4
5
4
5

Up arrowhead : page up
Down arrowhead : page down
Left arrowhead : reduce
Right arrowhead : increase
Enter : OK function
Exit : in the choice screen
UP
DOWN
LEFT RIGHT
ENTER
C O N T R O L PA N E L
10
ART
NET
7
Art-Net
DMX:
001 DMX Address Information Personal Manual control
Service Language Reversal

M E N U SE T T I N G
11
Main menu Ⅰmenu Ⅱ menu Ⅲ menu IV menu
DMX
Seettings
Address
DMX Signal mode Wire priority
ARTNET priority
ART-NET
IP address
No Artnet board
Mask Address
Net Address
Sub net Address
UniverseAddress
Return(ESC)
Return(ESC)
Information
Total Time Power
On: ****(h)
LED On: ****(h)
Temperature LED TEMP:00.0
Logged
temperature
LED temperature
Cur TEMP：**.*
Max TEMP:**.*
Min TEMP:**.*
Return(ESC)
Fan information led fan
1.Power:**.*V
2.Sp-Fan1:****%
3.Sp-Fan2:****%
4.Sp-Fan3:****%
5.Sp-Fan4:****%
6.Sp-Fan1:****R
7.Sp-Fan2:****R
8.Sp-Fan3:****R
9.Sp-Fan4:****R
Return(ESC)
RDM UID 3888:********
DMX live
1.Pan ***
2.Pan Fine ***
3.Tilt ***
4.Tlit Fine ***
5.Function ***
6.zoom ***
7.Zoom fine ***
8.Dimmer ***
9.Dimmer Fine ***
10.Shutter ***

12
Main menu Ⅰmenu Ⅱ menu Ⅲ menu IV menu
Information
DMX live
11.Macro ***
12.CCT ***
13.Sta Effect ***
14.MoveEffect ***
15.EffectSP ***
16.LED Fade ***
17.Back Color ***
18.Back Dimmer ***
19.Red ***
20.Green ***
21.Blue ***
22.White ***
23.Auar Dimmer ***
24.Auar color macro ***
25.Auar EffectMac ***
26.Auar EffectSP ***
System
version
XY: V*.**
LED:
V*.**
Zoom:
V*.**
DIS:
V*.**
Return(ESC)
Personal
Display lock OFF/关
ON/开
Channel mode
Mode-1(26CH)
Mode-2(45CH)
Mode-3(98CH)
Mode-4(79CH)
Mode-5(22CH)
Mode-6(16CH)
Mode-7(39CH)
Mode-8(35CH)
Fan mode
Auto
Stage
Studio
Dimmer speed
Dimmer sp-1(Fast)
Dimmer sp-2
Dimmer sp-3
Dimmer sp-4(Slow)

13
Main menu Ⅰmenu Ⅱ menu Ⅲ menu IV menu
Dimmer curve
Linear
Square
I-Square
SCurve
P/T invert
Pan invert OFF
Personal ON
Tilt invert OFF
ON
Return(ESC)
Display
Backlight Always on
Auto off (15s)
Rotate Normal
Rotate 180
Backlight blink ON
OFF
Return(ESC)
XY Sensor Power OFF
ON
Return(ESC)
Manual
control Channel control
1.Pan
***
2.Pan Fine ***
3.Tilt ***
4.Tlit Fine ***
5.Function ***
6.zoom ***
7.Zoom fine ***
8.Dimmer ***
Manual
control Channel control
9.Dimmer Fine ***
10.Shutter ***
11.Macro ***
12.CCT ***
13.Sta Effect ***
14.MoveEffect ***
15.EffectSP ***
16.LED Fade ***
17.Back Color ***
18.Back Dimmer ***
19.Red ***
20.Green ***

14
Main menu Ⅰmenu Ⅱ menu Ⅲ menu IV menu
Manual
control
Channel control
21.Blue ***
22.White ***
23.Auar Dimmer ***
24.Auar color macro ***
25.Auar EffectMac ***
26.Auar EffectSP ***
Return(ESC)
Reset
Reset all
Pan/Tilt reset
Zoom reset
Return(ESC)
Return(ESC)
Service
Error information
Error list
Empty list NO
YES
Return(ESC)
Calibration
Pan
000-255
Tilt
000-255
ZOOM
000-255
Red-1 000-255
Green-1 000-255
Blue-1 000-255
White-1 000-255
Red-2 000-255
Green-2 000-255
Blue-2 000-255
White-2 000-255
Red-3 000-255
Green-3 000-255
Blue-3 000-255
White-3 000-255
Service Calibration
Red-4 000-255
Green-4 000-255
Blue-4 000-255
White-4 000-255
Return(ESC)

15
Main menu Ⅰmenu Ⅱ menu Ⅲ menu IV menu
Service Factory
Load default
Reset timers
Clear logged temperature
Developer
Firmware update
Return(ESC)
Return(ESC)
Test
Test P/T STEP ***
Test effect STEP ***
Test all STEP ***
Return(ESC)
Language English
Chinese
Rotate
display
Normal
Rotate 180°

C H A N N E L F U N C T I O N
16
Standard(26CH)
Channel DMX Percentage Function
1 0-255 Pan
20-255 Pan Fine
30-255 Tilt
40-10 Tilt Fine
5
0-25 No Function
26-30 Zoom Reset
31-40 P/T Reset
41-50 System Reset
51-255 No Function
60-255 Zoom
70-255 Zoom Rotation
80-255 Dimmer
90-255 Dimmer Fine
10
Shutter
0-9 0-3.5 NO Function
10-49 3.9-19.2 Slow closing，Fast opening，slow → Fast
50-89 19.6-34.9 Fast
closing，Slow opening，Slow
→ Fast
90-119 35.3-46.7 Slow
closing，Slow open，Slow
→ Fast
120-179 47.1-70.2 Random
strobe,Slow → Fast
180-249 70.6-97.6 Synchronous strobe,slow → Fast
250-255 98-100 NO Function
11 0-255 Macro
12 0-255 CCT
13 0-255 Static Effect
14 0-255 Move Effect
15 0-255 Move Effect Speed
16 0-255 LED Effect Delay
17 0-255 Background Color
18 0-255 Background Dimmer
19 0-255 Red
20 0-255 Green
21 0-255 Blue
22 0-255 White
23 0-255 Auar Dimmer
24 0-255 Auar Color Macro
25 0-255 Auar Effect Macro
26 0-255 Auar Effect Speed

17
Mode 2（45CH)
Channel DMX Percentage Function
10-255 Pan
20-255 Pan Fine
30-255 Tilt
40-255 Tilt Fine
5
0-25 No Function
26-30 Zoom Reset
31-40 P/T Reset
41-50 System Reset
51-255 No Function
60-255 Zoom
70-255 Zoom Rotation
80-255 Dimmer
90-255 Dimmer Fine
10
Shutter
0-9 0-3.5 NO Function
10-49 3.9-19.2 Slow closing，Fast opening，slow → Fast
50-89 19.6-34.9 Fast closing，Slow opening，Slow → Fast
90-119 35.3-46.7 Slow closing，Slow open，Slow → Fast
120-179 47.1-70.2 Random strobe,Slow → Fast
180-249 70.6-97.6 Synchronous
strobe,slow
→ Fast
250-255 98-100 NO
Function
11 0-255 Macro
12 0-255 CCT
13 0-255 Static Effect
14 0-255 Move Effect
15 0-255 Move Effect Speed
16 0-255 LED Effect Delay
17 0-255 Background Color
18 0-255 Background Dimmer
19 0-255 Red
20 0-255 Green
21 0-255 Blue
22 0-255 White
23 0-255 Color1
24 0-255 Color2
25 0-255 Color3
26 0-255 Color4
27 0-255 Color5
28 0-255 Color6
29 0-255 Color7
30 0-255 Color8
31 0-255 Color9
32 0-255 Color10
33 0-255 Color11

18
34 0-255 Color12
Channel DMX Percentage Function
35 0-255 Color13
36 0-255 Color14
37 0-255 Color15
38 0-255 Color16
39 0-255 Color17
40 0-255 Color18
41 0-255 Color19
42 0-255 Auar Dimmer
43 0-255 Auar Color Macro
44 0-255 Auar Effect Macro
45 0-255 Auar Effect Speed

19
Mode 3（98CH)
Channel DMX Percentage Function
10-255 Pan
20-255 Pan Fine
30-255 Tilt
40-255 Tilt Fine
5
0-25 No Function
26-30 Zoom Reset
31-40 P/T Reset
41-50 System Reset
51-255 No Function
60-255 Zoom
70-255 Zoom Rotation
80-255 Dimmer
90-255 Dimmer Fine
10
Shutter
0-9 0-3.5 NO Function
10-49 3.9-19.2 Slow closing，Fast opening，slow → Fast
50-89 19.6-34.9 Fast closing，Slow opening，Slow → Fast
90-119 35.3-46.7 Slow closing，Slow open，Slow → Fast
120-179 47.1-70.2 Random strobe,Slow → Fast
180-249 70.6-97.6 Synchronous
strobe,slow
→ Fast
250-255 98-100 NO
Function
11 0-255 Macro
12 0-255 CCT
13 0-255 Static Effect
14 0-255 Move Effect
15 0-255 Move Effect Speed
16 0-255 LED Effect Delay
17 0-255 Background Color
18 0-255 Background Dimmer
19 0-255 Red-1
20 0-255 Green-1
21 0-255 Blue-1
22 0-255 White-1
23 0-255 Red-2
24 0-255 Green-2
25 0-255 Blue-2
26 0-255 White-2
27 0-255 Red-3
28 0-255 Green-3
29 0-255 Blue-3
30 0-255 White-3
31 0-255 Red-4
32 0-255 Green-4
33 0-255 Blue-4